Fordmods Logo

mod a single rail 5 speed? 

 

Page 1 of 1 [ 11 posts ] 

 
 Post subject: mod a single rail 5 speed?
Posted: Sun Oct 21, 2007 3:09 pm 
Fordmods Newbie
Offline

Posts: 13

Joined: 12th May 2007

Ride: falcon

Location: brightview
QLD, Australia

I have a 5 speed single rail gearbox and i was told that they are no good behind a 250 xflow, i was wondering if it would be possible to modifiy it so it will last behind a 250 xflow?!
Top
 Profile  
 
 
Posted: Sun Oct 21, 2007 4:40 pm 
Getting Side Ways
Offline
User avatar

Age: 55

Posts: 1883

Joined: 22nd Apr 2005

Ride: 94 ED Fairmont, MY97 LE WRX

Location: Seymour
VIC, Australia

Nar mate I'll give ya $50 plus postage for it though.
Top
 Profile  
 
 
Posted: Sun Oct 21, 2007 7:07 pm 
Fordmods Newbie
Offline

Posts: 13

Joined: 12th May 2007

Ride: falcon

Location: brightview
QLD, Australia

sorry mate but i paid $280 for it and have replaced the uni's on the propsharft!! id let you ave it for $290
Top
 Profile  
 
 
 Post subject: Re: mod a single rail 5 speed?
Posted: Mon Oct 22, 2007 9:43 am 
Stock as a Rock
Offline

Age: 54

Posts: 156

Joined: 21st Oct 2006

Location: Morwell
VIC, Australia

{USERNAME} wrote:
I have a 5 speed single rail gearbox and i was told that they are no good behind a 250 xflow, i was wondering if it would be possible to modifiy it so it will last behind a 250 xflow?!


You sure about that mate...? Single rails will hold up against a decent 250, no probs. aint worth more than $50 though and only 4spd too.
If it`s 5 speed it`s either a 507 (Jap box) or a T5... for your $280, I hope it`s the latter...

JAIKAI
Top
 Profile  
 
 
 Post subject: Re: mod a single rail 5 speed?
Posted: Mon Oct 22, 2007 9:48 am 
Technical Contributor
Offline

Age: 57

Posts: 3227

Joined: 12th Feb 2007

Gallery: 10 images

Ride: Falcon

Power: 113 rwkw

Location: your mums
NSW, Australia

{USERNAME} wrote:
I have a 5 speed single rail gearbox and i was told that they are no good behind a 250 xflow, i was wondering if it would be possible to modifiy it so it will last behind a 250 xflow?!


it will be fine behind your 250

 

_________________

BANNED

Top
 Profile  
 
 
Posted: Mon Oct 22, 2007 10:28 am 
Fordmods Newbie
Offline

Posts: 13

Joined: 12th May 2007

Ride: falcon

Location: brightview
QLD, Australia

when i pulled it apart the fith gear retaning blot was broken and i got a nother one and the bloke who sold it said that, thats what happens they were only ment for 200 xflows or small holden motors!! it's not a T5 it's basicly a modifiyd 4 speed!
Top
 Profile  
 
 
Posted: Mon Oct 22, 2007 10:34 am 
Stock as a Rock
Offline

Age: 54

Posts: 156

Joined: 21st Oct 2006

Location: Morwell
VIC, Australia

Yep, Borgy 506, Jap box in real terms. The 507 had 5th gear setup, you can find `em in Sigma boxes and refit yourself. I`d go a single rail meself. easier to find than T5 and cheaper too.

Be aware that the 506/507 uses different bell and tailshaft yoke to the others too.

JAIKAI
Top
 Profile  
 
 
Posted: Mon Oct 22, 2007 10:56 am 
Getting Side Ways
Offline
User avatar

Age: 55

Posts: 1883

Joined: 22nd Apr 2005

Ride: 94 ED Fairmont, MY97 LE WRX

Location: Seymour
VIC, Australia

Ok in the XD & Xe series they came out with 3 differant floor shift boxes.

0503 xxxx box is a 4 speed forward and 1 speed reverse, you can tell this box apart from the others via the side mounting of the gear lever housing.

0506 xxx box is a modified 0507 xxxx box,
thus it has the same main box as it 5 speed counter part with 4 forward gears and 1 reverse gear, it also has a modified gear selector.

0507 xxxx box is the unmodified version of the 0506 xxxx,
it has the same main box as the 0506 xxxx with 4 forward gears and 1 reverse gear,
but in the rear housing it has a fifth gear fitted and the gear lever is not modified.

All these boxes are made by Borg Warner and only problem I have ever heard with them is with the 5th gear,
do not drive below 70kph other wise you stress the gear to much and it can jump out, once it has done this it will keep doing it.
Top
 Profile  
 
 
Posted: Mon Oct 22, 2007 11:04 am 
Stock as a Rock
Offline

Age: 54

Posts: 156

Joined: 21st Oct 2006

Location: Morwell
VIC, Australia

Good stuff mate, I typed it all out in similar fashion here ages ago but ppl keep asking. we used to chuck 5th idlers into the 4spd boxes to get a few more bucks for `em through the local wreckers. plenty of Sigmas had `em and no-one ever broke one behind a Sigma...strange but true :lol:

Also good for those wanting to buy a cheap XF with 5spd, seen plenty of ppl buy one thinking they were getting a T5 on the cheap and ending up with one of these 507 jobs...

JAIKAI
Top
 Profile  
 
 
Posted: Mon Oct 22, 2007 7:54 pm 
Fordmods Newbie
Offline

Posts: 13

Joined: 12th May 2007

Ride: falcon

Location: brightview
QLD, Australia

yer it's a 0507 series, so ya recon it should be alrite coz i do alot of k's and i don't fancy stuck in the middle of no were with a buggerd gearbox! iv got a 0503 4 speed in it atm it seems to go alrite but i recon a fith gear wod make it go just a lil beter over 100ks! also if this box is alrite is it possible to get a bell housing with the cluch release on the left hand side due to the extractors and cat!!
Top
 Profile  
 
 
Posted: Tue Oct 23, 2007 7:53 am 
Stock as a Rock
Offline

Age: 54

Posts: 156

Joined: 21st Oct 2006

Location: Morwell
VIC, Australia

Should be able to... basically any 86 onwards XF will have LHS cable, it made it easy to stay away from the Cat that way. Yeah, drive it normally and you`ll be right as mate, back to 4th under 80km/h...

JAIKAI
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 11 posts ] 

Who is online

Users browsing this forum: Google [Bot] and 10 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Mon Dec 23, 2024 8:30 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names