if set up properly belts stay on better when changing revs also

$300 bargin 1970 Xw 500, 3.6L , 3speed colum shift, front and rear drum brakes, front and rear bench seats. White with black stripe on outside and red on the inside. Bonus, it all original, straight and very litle rust

You can see my newly purchase piece of poo here

http://www.fordmods.com/phpBB2/gallery. ... e&meetid=0

Goes good, but man, needs a lot of work.

XF Fairmont Ghia - COME Racing ST3 Motor (balanced and blueprinted, hi energy sump, shotpeened rods, arp rod bolts, ACL Forged Pistions, Moly rings, alloy head, port and polished and flows 358 HP, 302 cleveland guide plates, double valve springs and locks, crane adjustable roller rockers, 165 and 185 valves, the cam is a saliba grind, 540 " lift, 226 on the inlet, 230 on the exhaust) JRM ST2 B/W 40 auto with 2600 Dominator hi-stall, 3.45 in the rear, dandy exhaust mandrel bent extractors and pipes with straight thru mufflers.

It has modded airflow meter, computer and piggy backed Unichip.

Good for 230 + HP... Not bad for a restrictive top end (air plenum and intake).

Trou Performance and Panels Paint all over including detailed engine bay and undercarriage, 3.5 inch suspension drop, simmons, boot full of sound gear.

Not a bad car for a cruiser.

I may be selling the motor and box in the new year. If anyone is interested by all means, let me know...

ZH fairlane 500 (not an X, but close enough!)

302 clevland, elec ignition, straight lpg
FMX, Borgwarner LSD of somesort, but it gets sideways!

bog stock jg23 xy .. see

{DESCRIPTION}

{DESCRIPTION}

Hi all

My work ute is a bit of a odd ball Im running a 250 with ct26 turbo truck intercooler haltect ,fe ltd dash seats powerwindows ect basically a concoction of what ever parts I had at work .
Works ok 5psi by 1400rpm but all over by 3500rpm but boy does it tow well.

lol welcome mate

We have a 1987 XF wagon, metallic gold, 4.1 auto. Basically bog standard.
Might be getting a manual conversion if I can be bothered. It is basically just a shopping wagon.

My brother has an XY ute, totally scruffy old bomb but he loves it to bits.
200 low compression from a 1976 Transit six, 3 speed with a Speco floor change, and drims all round although he has a set of XF discs and stub axles which are about to go on it.

Our family van is a 1969 Transit bus, which used to be a V4 but had already been converted rather roughly when we got it to a 200 from a Cortina with a 3 speed floor shift about a foot behind the driver's seat and the motor between the front seats. It also had a Falcon 3.50 diff
We fitted XY discs with HQ HOlden calipers up front, got a wrecked factory six with the longnose and moved the motor forwards and used the factory six gearshift. After it ate the second old 200 and its 7th 3 speed gearbox ( it kept eating reverse) we stuck an XE 4.1 and a single rail out of an XF in it. The single rail had d**k selectors so we put another one in it, and the engine swallowed a piece of the carb and mashed No.6 piston and the head so we stuck what we think is an XB engine in it that we dragged out of a dog kennel where it had lain for 3 years, changed the oil, plugs, dissy cap, and rotor arm and it ran perfectly. It pulls like a train but it could do with a bit more power, a lot more economy, a 5 speed gearbox, power steering (arm acher at the moment) and rack +pinion steering to make it handle better.
Future plans include IFS, either modified HQ or custom built, either a 4 link a*** end with discs or ideally ( but pricey) a BA sedan IRS under it, and possibly an OHC engine. It is also probably getting a complete XF S-Pack dash, which will make the interior a nicer place to be.

blu xf falcon, late 87..
4wheel disc
lowered
then lowered some more
extractors
exhaust (off an EA)
lsd (also EA)
modded alternator 85amps (also EA i love parts cars:))
has full spac options now door trims dash etc
3spd
full stereo
redline intake manifold still running the webber
rims
body colourcoded and resprayed
thermo fans
air horns
chrome door handles
ford emblum painted on radiator
and so many other little bits and pieces that i cant even think of atm

-mitch

XD interceptor. Only just got it so mods haven't started yet, but the base for power is there. Already got goodise like oil cooler and tramp rods, as well as a custom interior (combination of XD-E-F as well as ESP).

Just new myself. My ride is an XC Fairmont GXL.

387 Stroker custom pistons. Standard bores with file back rings.
Redline single plain intake with a two inch spacer and 650 holley.
Heads are 2 V with 4 V valves and large hydraulic cam.

Auto is a C10 2500 stall stage 2 shift kit and B&M shifter and thick wall tail shaft.

Diff is nine inch disc brake with 4.11.1 for the strip and 2.5.1 for the
street.

Its best time so far is 12.04 @ 114 with i hope more to come.

Estimated hp is about 400+ at the rear.

Hope you like it.

XF Fairmont Ghia

250 EFI Turbo Intercooled
T66 Turbo
Custom Air to Air intercooler
48mm Turbosmart Wastegate
Custom Forgies
Custom Turbo Manifold
Wolf 3D
Bosch 044 fuel pump
Rochester Fuel Regulator
C9 stg3 with TCE 33500rpm stall
3" mandrel bent exhaust
3.23 diff 28 spline axles mini spooled

Heres a few pics:

we have heaps of x series car's now yay

My signature tells you the basics but to expand.

'74 XB Falcon 500 Hardtop (Coupe)
'79 351 Cleveland out of a ZJ fairlane
Holley 650 Vacuum Spread Bore
4 into 1 headers (unsure of brand)
Twin system exhaust. Minimal muffling
Mallory twin point dizzy
Tricked C4 (changes very hard)
B&M ratchet starshifter
transcooler
9" diff, LSD, disc brake. I think 2.75 but have to verify (read Change).
GT Grill, Dash, Valance panel, bonnet, side scoops.
235/60/15 front
275/50/15 rear

Soon to have:
EFI (Redline Street Torker manifold)
Digital dash (datalogging)
Aircon
Power Steer
better, bigger wheels/tyres.
Maybe twin turbo one day.