|
| longlivethefalcon |
|
||
|
I have a 250 2v in my xm falcon and was wondering if the xflow dizzy will fit in to replace the standard 1 and if not what is required to fit?
I have been told that i will by 1 person and that it wont by another and both are reliable sources. Also is the bolt pattern for the transmission/gearbox the same for both blocks, i couldnt see why they wouldnt be but i cant be bothered crawling under the car to see and compare it with the xflow block i have in the shed.
_________________ Mk2 Zephyr |
||
| Top | |
||
| The Dog |
|
|||
|
They are interchangeable from memory. But there is a bush needed to convert one to the other but I can't remember which way
  . If you see the guys at REPCO or somewhere like that they can tell you (if they know their stuff; they were the ones that told me and supplied me with the parts. 
_________________ You'll ride a black tornado across the western sky
|
|||
| Top | |
|||
| longlivethefalcon |
|
||
|
Thanks.
Well now that i know it will fit i think ill start looking for an xe/xf dizzy. Does any1 know the part number of the bush or even how much it is. Any1 else out there with extra info.
_________________ Mk2 Zephyr |
||
| Top | |
||
| The Dog |
|
|||
|
I can tell you it was about 5 bucks....but thats all I remember, sorry
Been lots of alcohol pass through the system since then. 
_________________ You'll ride a black tornado across the western sky
|
|||
| Top | |
|||
| cjh |
|
|||
|
I would swap over the drive gear off the dizzy, they may be slightly different. Pull your dizzy out and start measuring to see if & what differences there are.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 9 guests |
