|
| Mac Winter 76XB351GS |
|
|||
|
Gday
Iv got a little bit of rust forming under the paint on my GT bonnet  just on the front lip, the rest of the bonnet is spot on. Ive taken it around a few places and everyone says its going to be too hard to fix.
So Ive picked up a standard XC bonnet that has never been on a car and is still in factory primer, perftect condition 
Anyways I dont want to lose the "tuffness" of the car by having a standard bonnet so Id like to put a shaker on. Just wondering if anyone has done this before and what issues you ran into. I have a edelbrock proformer intake manifold, a one inch spacer and a 750 Holley on a 351 clevo. Not too sure if im going to have height issues. Im pretty sure the intake manifold is the same height as the stock one. Thanks heaps
_________________ 76XBGS, 383c, custom crow cam, 4V p&p heads, Isky SS Valve+springs, extractors, 2.5"twins, MSD Ignition, Edelbrock intake, Forged bottom end, Barry Grant 750DP, thermo, discs, toploader, Holley fuel pump, SUPERCHARGED! |
|||
| Top | |
|||
| The Dog |
|
|||
|
Its a bit rice but when I had my xd I had 3 bonnets. One was standard, one had a phase 5 scoop on it and the other had what I would term a "faker". It was actually fixed to the bonnet not the engine and was a piece of piss to fit but from a few paces it looked like the real deal. This is one option. Otherwise GTSpares would be the place to call.
_________________ You'll ride a black tornado across the western sky
|
|||
| Top | |
|||
| low ghia |
|
|||
|
well i did my xb in 1987. no probs with bonnet strength
issues-none except broke jigsaw blade 
_________________
|
|||
| Top | |
|||
| 409Stroker |
|
||||
|
i installed a shaker on my 2nd XY falcon and its a piece of cake make shaw your bonnet is in perfect position befor you go measuring up and cutting any thing if you get this bit wrong then its going to be s**t when its finnished and make shaw you get a brace kit to strengthen your bonnet once you have cut out the gutts of it i cut mine out with a grinder to cut threw the main structure of the bonnet and a nibler to cut the skin of the bonnet dont rush it take your time to mark it out properly before you cut check out the photo of the inside of the bonet you can see the strengthining braces to stop the bonnet from floping around they are the unpainted bits bye the way i welded the braces into place and also applied
sikoflex between the theskin and the braces where i would not be welding well this is an XY bonnet but i hope it helps you out some what...
_________________ If you have it under control then you dont have enough power..
Last edited by 409Stroker on Sun Sep 03, 2006 10:43 pm, edited 1 time in total. |
||||
| Top | |
||||
| Mac Winter 76XB351GS |
|
|||
|
The GT bonnet with a shaker looks cool, too bad mine's forming cancer... I want the shaker to be attached to the carby. Ive been quoted $380 for a reproduction shaker, is this a decent price. Iv got a few leads for original ones but not too sure how reliable they are.
_________________ 76XBGS, 383c, custom crow cam, 4V p&p heads, Isky SS Valve+springs, extractors, 2.5"twins, MSD Ignition, Edelbrock intake, Forged bottom end, Barry Grant 750DP, thermo, discs, toploader, Holley fuel pump, SUPERCHARGED! |
|||
| Top | |
|||
| The Dog |
|
|||
|
Might find with most of the originals that not only will they be expensive but the rubber trim around them will probably be rooted anyway.
By the way low ghia that xb looks pretty cool. Nice colour! 
_________________ You'll ride a black tornado across the western sky
|
|||
| Top | |
|||
| 409Stroker |
|
||
|
when you are purchasing your shaker make shaw you are aware what you are bying as far as im aware there is 3 different types you can get they all look simler at first glance but they are differant the spacing and number of gaps in the intake mouth is different it does make a big difference to the look that is a fair price but i have seen them cheaper bye maybe 30 bucks
_________________ If you have it under control then you dont have enough power..
|
||
| Top | |
||
| Mac Winter 76XB351GS |
|
|||||
|
Thanks for the help. Ill take a look at the kits before I order one to make sure it will suit.
Im going to get the shaker put in professionally, and then get the bonnet painted. Heres a pic of what its going into...minus the flutes and bonnet pins ofcourse.
_________________ 76XBGS, 383c, custom crow cam, 4V p&p heads, Isky SS Valve+springs, extractors, 2.5"twins, MSD Ignition, Edelbrock intake, Forged bottom end, Barry Grant 750DP, thermo, discs, toploader, Holley fuel pump, SUPERCHARGED! |
|||||
| Top | |
|||||
| The Dog |
|
|||
|
I saw one where they kept the pins and flutes and it still looked sweet.
She should look great when finished. Some of these young fellas on here probably think that this is a vintage car  Keep us up to date with pics etc.
_________________ You'll ride a black tornado across the western sky
|
|||
| Top | |
|||
| Mac Winter 76XB351GS |
|
|||||
|
Thanks for the help. Ill take a look at the kits before I order one to make sure it will suit.
Im going to get the shaker put in professionally, and then get the bonnet painted. Heres a pic of what its going into...minus the flutes and bonnet pins ofcourse.
_________________ 76XBGS, 383c, custom crow cam, 4V p&p heads, Isky SS Valve+springs, extractors, 2.5"twins, MSD Ignition, Edelbrock intake, Forged bottom end, Barry Grant 750DP, thermo, discs, toploader, Holley fuel pump, SUPERCHARGED! |
|||||
| Top | |
|||||
| Mac Winter 76XB351GS |
|
|||
|
Yeah Id love to keep the GT bonnet on there but cancer has taken hold and isnt going to stop
I might fit a pin kit....not sure...heard its a pain, same with fitting flutes to a standard bonnet. I think I'll just go with the standard bonnet and the shaker. Dont ask why I posted the same thing twice....not sure what happened.
_________________ 76XBGS, 383c, custom crow cam, 4V p&p heads, Isky SS Valve+springs, extractors, 2.5"twins, MSD Ignition, Edelbrock intake, Forged bottom end, Barry Grant 750DP, thermo, discs, toploader, Holley fuel pump, SUPERCHARGED! |
|||
| Top | |
|||
| Samsy |
|
|||
|
I had a shaker on my XB before i got it repainted.
(see gallery pre respray). I removed it and replaced the bonnet when i got the new paintjob. I had no problems except for the height of the shaker (too low) I fixed it by just fitting a carby spacer.
_________________ XB 351 and BA GT |
|||
| Top | |
|||
| Mac Winter 76XB351GS |
|
|||
|
Ok, so you had a holley and a 1" spacer and the shaker lined up with the bonnet spot on?
_________________ 76XBGS, 383c, custom crow cam, 4V p&p heads, Isky SS Valve+springs, extractors, 2.5"twins, MSD Ignition, Edelbrock intake, Forged bottom end, Barry Grant 750DP, thermo, discs, toploader, Holley fuel pump, SUPERCHARGED! |
|||
| Top | |
|||
| The Dog |
|
|||
|
You guys are aware that carby spacers can hurt or improve torque curves etc??
_________________ You'll ride a black tornado across the western sky
|
|||
| Top | |
|||
| Samsy |
|
|||
|
{USERNAME} wrote: Ok, so you had a holley and a 1" spacer and the shaker lined up with the bonnet spot on?
Yeah a holley with a 1" spacer and it lined up pretty close, maybe a tiny, tiny bit lower, but pretty damn close I thought. I was happy with it at the time but wanted a change when I got the respray done.
_________________ XB 351 and BA GT |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 23 guests |
