Fordmods Logo

XE Drum to Disc Conversion (rear) 

 

Page 1 of 1 [ 10 posts ] 

 
 Post subject: XE Drum to Disc Conversion (rear)
Posted: Tue Jun 05, 2007 11:15 pm 
Oompa Loompa
Offline
User avatar

Age: 52

Posts: 36

Joined: 1st Mar 2005

Ride: XE S-Pack, ED Wagon

Location: COWRA
NSW, Australia

Hi all, I`ve just been given a complete XF rear end wih disc brakes. What I need to know is apart from the rotors, handbrake cable, Calipers and mounts and rear brake lines on the diff is there anything else I need? Or would it be easier to swap the whole diff?

TIA
Top
 Profile  
 
 
Posted: Tue Jun 05, 2007 11:19 pm 
Technical Contributor
Offline
User avatar

Age: 45

Posts: 4093

Joined: 20th Mar 2005

Gallery: 2 images

Ride: 2.0 Turbo VW

Power: 142 rwkw

Location: Seaford State:
VIC, Australia

Also need to remove the proportioning valve from the master cylinder.

 

_________________

Carefree, we may not be number one, but we're up there.

Top
 Profile  
 
 
Posted: Tue Jun 05, 2007 11:31 pm 
Getting Side Ways
Offline
User avatar

Age: 52

Posts: 1953

Joined: 1st Feb 2006

Gallery: 25 images

Ride: BA on gas. EL on gas. XF on gas.

Location: Greenacres/Adelaide
SA, Australia

ummm... put a disk rear end valve back in too... lol
change the whole diff it is easier than pulling axles and swapping brakes assuming they are both sedan diffs. Depending on how much you know about brakes, you may be better off getting another master cyl to suit disk rear.

 

_________________

Member Number 8804
Image

Top
 Profile  
 
 
Posted: Tue Jun 05, 2007 11:34 pm 
Oompa Loompa
Offline
User avatar

Age: 52

Posts: 36

Joined: 1st Mar 2005

Ride: XE S-Pack, ED Wagon

Location: COWRA
NSW, Australia

I had the impression the master cylinders were all the same
Top
 Profile  
 
 
Posted: Tue Jun 05, 2007 11:42 pm 
Getting Side Ways
Offline
User avatar

Age: 52

Posts: 1953

Joined: 1st Feb 2006

Gallery: 25 images

Ride: BA on gas. EL on gas. XF on gas.

Location: Greenacres/Adelaide
SA, Australia

Disk brakes need less pressure than drum brakes.
So rear lockup coud happen.
This valve controls your front to rear brake bias.

 

_________________

Member Number 8804
Image

Top
 Profile  
 
 
Posted: Tue Jun 05, 2007 11:54 pm 
Oompa Loompa
Offline
User avatar

Age: 52

Posts: 36

Joined: 1st Mar 2005

Ride: XE S-Pack, ED Wagon

Location: COWRA
NSW, Australia

MadMatt wrote:
change the whole diff it is easier than pulling axles and swapping brakes assuming they are both sedan diffs.


That was my preferred method. I can get the booster and master cylinder of the donor car also
Top
 Profile  
 
 
Posted: Tue Jun 05, 2007 11:59 pm 
Getting Side Ways
Offline
User avatar

Age: 52

Posts: 1953

Joined: 1st Feb 2006

Gallery: 25 images

Ride: BA on gas. EL on gas. XF on gas.

Location: Greenacres/Adelaide
SA, Australia

As fer as I can remember the booster it is same for both.

 

_________________

Member Number 8804
Image

Top
 Profile  
 
 
Posted: Wed Jun 06, 2007 12:09 am 
Oompa Loompa
Offline
User avatar

Age: 52

Posts: 36

Joined: 1st Mar 2005

Ride: XE S-Pack, ED Wagon

Location: COWRA
NSW, Australia

Done a quick check on PBRs website, lists the same part for both
:shock:

Brake M/Cyl 03/1982 - 08/1984 SEDAN, DISC/DISC, DISC/DRUM, 6 CYL, 8 CYL, 25.40 mm P10050
Top
 Profile  
 
 
Posted: Tue Jun 26, 2007 5:27 pm 
Stock as a Rock
Offline

Age: 43

Posts: 169

Joined: 27th Nov 2004

Gallery: 3 images

Location: wollongong
NSW, Australia

MadMatt wrote:
Disk brakes need less pressure than drum brakes.
So rear lockup coud happen.
This valve controls your front to rear brake bias.


no. Disc brakes need more pressure than drum brakes.
Top
 Profile  
 
 
Posted: Tue Jun 26, 2007 5:55 pm 
Getting Side Ways
Offline
User avatar

Age: 52

Posts: 1953

Joined: 1st Feb 2006

Gallery: 25 images

Ride: BA on gas. EL on gas. XF on gas.

Location: Greenacres/Adelaide
SA, Australia

Oops, you are correct.

 

_________________

Member Number 8804
Image

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 10 posts ] 

Who is online

Users browsing this forum: No registered users and 20 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sat Nov 23, 2024 4:52 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names