|
| Busso |
|
|||
|
hey guys the drivers side door on my xf won't unlock.
lol cant open it on the inside by puling as hard as i can (upwards on the lock) or from the outside usin the key. obviously cant open it to get the door trim off to look at the mechanism, any other ideas before i get out the jigsaw and rip apart my door skin ??? any help appreciated guys, thanx
_________________ 84 XF Falcon S Pak, 250 crossflow (rebuilt ~5000km ago, carby model), Bored out 30 thou, Crow racing cam, extractors, yokohama 245's all the way round, chrome 12 slotters, lowered, 4spd man, open wheeler (blew my lsd...), Thumping sound system, L.E.D's everywhere |
|||
| Top | |
|||
| GASSA |
|
||
|
u can remove the door trim when the door is closed just undo the 2 grab handle screw take the trim off around the inside handle remove window handle undo lefthand mirror bezel get a flat blade screwdriver and force bottom of door trim away from door get fingers under door trim and pull hard remove lock buttom lift trim up and it off u will find the door lock is worn so replace it
gassa
_________________ When the clutch drops the bull s**t stops!!!!! |
||
| Top | |
||
| Busso |
|
|||
|
fuk yer stoked man ill have to get onto that, cheers
_________________ 84 XF Falcon S Pak, 250 crossflow (rebuilt ~5000km ago, carby model), Bored out 30 thou, Crow racing cam, extractors, yokohama 245's all the way round, chrome 12 slotters, lowered, 4spd man, open wheeler (blew my lsd...), Thumping sound system, L.E.D's everywhere |
|||
| Top | |
|||
| carnut1100 |
|
||
|
Been there done that, but on XEs.
Getting the trim off is a pain, but possible. It is annoying when you have do it 4 times in one week though........
_________________ I hate Hyundais. |
||
| Top | |
||
| Busso |
|
|||
|
so what did you find was the problem once u got the trim off ?
_________________ 84 XF Falcon S Pak, 250 crossflow (rebuilt ~5000km ago, carby model), Bored out 30 thou, Crow racing cam, extractors, yokohama 245's all the way round, chrome 12 slotters, lowered, 4spd man, open wheeler (blew my lsd...), Thumping sound system, L.E.D's everywhere |
|||
| Top | |
|||
| Busso |
|
|||
|
Well all sorted now. Was the actual mechanism that screws onto the door and holds the door shut kinda thing.
Door trim was easy as to get off with door shut. Sold car today for 1000 bux yay
_________________ 84 XF Falcon S Pak, 250 crossflow (rebuilt ~5000km ago, carby model), Bored out 30 thou, Crow racing cam, extractors, yokohama 245's all the way round, chrome 12 slotters, lowered, 4spd man, open wheeler (blew my lsd...), Thumping sound system, L.E.D's everywhere |
|||
| Top | |
|||
| carnut1100 |
|
||
|
I had to do it on more than one door......
The mechanism does fail, but one of the doors which stuffed up twice was the rivet that holds the linkage on had come out and beenreplaced by a slef tapper which kept on unwinding and the linkage jamming. A brand new handle fiked the problem. I have to replace a part of the interior mechanism soon on one door and the exterior handle on another. grrrrrrrrrrrrrrrrrrrrr....................
_________________ I hate Hyundais. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 24 guests |
