Hi guys, just wanted to know if anyone has come up with a fix for the problems with fitting a sports steering wheel in a x-series Falcon and in particular the XG ute, I have two boss' s both for X-series-one came with the momo (not long enough)-supposedly was used on XF +XG and one I've just bought saas BK182L which is the only one listed for XG, I googled this problem and found dozens & dozens of people with the same problem-surely there has to be a way to fix this like somehow moving the combination switch in a bit more, will add a couple of pics, any ideas are welcome, cheers, Johnny.

 

 

Attachments:

File comment: If I could shorten the housing so the combination switch could go forward this boss would work?-I think? IMG_2015022527423.jpg [ 30.9 KiB | Viewed 426 times ]

File comment: SAAS Steering Boss Kit Catalog, only one that goes up to 94 E-series XR6 one on bottom. IMG_2015022536928.jpg [ 38.94 KiB | Viewed 445 times ]

File comment: Left one came with the momo & right one is the saas for XG. IMG_201502253347.jpg [ 44.88 KiB | Viewed 458 times ]

File comment: This is the saas BK182L the only one listed for XG.It rubs on the combination switch and isnt on the spline fully. IMG_2015022545545.jpg [ 36.49 KiB | Viewed 428 times ]

i have 3 differant boss kits for the momo.....

pretty sure this is for the EA/B/D

{DESCRIPTION}

{DESCRIPTION}
not sure what this ones for

{DESCRIPTION}

{DESCRIPTION}

not sure what this ones for lol

{DESCRIPTION}

{DESCRIPTION}

think this ones an early unit??

shiiit!


can a mod delete me previous reply .... stuffed it up & hit post instead of



i remember someone moddin a ute ..... mentioned having to change column shaft?

Hi guys, sent a email to saas sales and they responded very quickly, he says they've had this problem before, my XG being a 94 model apparently has a XF steering column meaning it needs the BK151L instead of the BK182L, so there you have it most XG's apparently have XF columns except for the later XG's.I'll update this thread if this is not correct, cheers, Johnny.

Just an update-got the BK151L from Autobarn this morning (this is the one saas sales recommended) this one lists as Fairmont Ghia and is shorter than the BK182L but slightly too short to turn the indicators off (see pics) so after a thought I used some washers between the combination switch & housing to get it to work and alls good so far, cheers ,Johnny.

 

 

Attachments:

File comment: Here you can see how much the switch needed to come forward IMG_201503035680.jpg [ 58.48 KiB | Viewed 453 times ]

File comment: Combination switch spaced IMG_20150303134.jpg [ 53.08 KiB | Viewed 476 times ]

File comment: All done IMG_2015030342780.jpg [ 45.07 KiB | Viewed 491 times ]