|
| au055 |
|
||
Age: 69 Posts: 167 Joined: 3rd Jul 2009 Ride: 2002 AU Fairlane Sportsman Location: Narellan |
Hi guys, I cannot find any info regarding the belt tensioner for the XH 4.0 litre motor. Can someone tell me if it is the same as the EF/EL or different. I noticed that my lower pulley seems to be loose and the entire arm appears to move about. The belt is actually rubbing against the arm and does not line up with the other pulleys. Cheers.
|
||
| Top | |
||
| TROYMAN |
|
||
|
they look much the same but are different to the ef tensioner, the top idler support arm is a different angle..
|
||
| Top | |
||
| au055 |
|
||
Age: 69 Posts: 167 Joined: 3rd Jul 2009 Ride: 2002 AU Fairlane Sportsman Location: Narellan |
Thanks Troyman, so I can't use one off anything apart from the XH. Is that right? Cheers.
|
||
| Top | |
||
| TROYMAN |
|
||
|
thats right, unless your xh is a xr6 with the bbm??
|
||
| Top | |
||
| au055 |
|
||
Age: 69 Posts: 167 Joined: 3rd Jul 2009 Ride: 2002 AU Fairlane Sportsman Location: Narellan |
NO just the standard 6 cylinder Longreach. Many thanks for the info, it looks like a trip to the parts guys tomorrow to see about a new one. Cheers,
|
||
| Top | |
||
| 67RCE |
|
||
|
You can use an EF/EL tensioner, contrary to popular belief. It needs some "modification" with an angle grinder though.
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
| Top | |
||
| OZBMX |
|
|||
|
As said, it is possible, but didn't he also get a belt 2 inches longer??
if the xh tensioners are cost prohibitive and you want to give it a go let us know and I'll take a photo of it, thank bushy for giving it a go though. 
_________________ Signature removed by moderator.signature must not exceed 120x500 pixles |
|||
| Top | |
|||
| au055 |
|
||
Age: 69 Posts: 167 Joined: 3rd Jul 2009 Ride: 2002 AU Fairlane Sportsman Location: Narellan |
Thanks guys, I will have a look tomorrow and see how much they want for the XH type. If it is expensive then I can take a look at the EF/EL one and modifying won't turn me off. Cheers again.
|
||
| Top | |
||
| TROYMAN |
|
||
|
yea you can use the ef one but the aircon pump needs to be spaced out further away from the block..
alot of mucking around to save a few $$ |
||
| Top | |
||
| 67RCE |
|
||
|
TROYMAN wrote: yea you can use the ef one but the aircon pump needs to be spaced out further away from the block.. alot of mucking around to save a few $$ It just needs EL A/C bolts and spacers. OZBMX wrote: As said, it is possible, but didn't he also get a belt 2 inches longer?? if the xh tensioners are cost prohibitive and you want to give it a go let us know and I'll take a photo of it, thank bushy for giving it a go though. Yes, 50mm longer than EL belt. XH Tensioners are cost prohibitive, in excess off $140..... I have to copy that belt setup for the NC too Joel!
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
| Top | |
||
| OZBMX |
|
|||
|
exactly , it depends what there worth ef/l standard ones are f**k all retail new. but if say xh = 200-300 then, It may very be worth the hassle, let us know the results either way.
_________________ Signature removed by moderator.signature must not exceed 120x500 pixles |
|||
| Top | |
|||
| Krytox |
|
|||
|
Bursons sell Dayco brand Tensioners for XH's without BBM for around $150 new.
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| OZBMX |
|
|||
|
haha, I think that's like 3 time what I paid for my ef one, and yes it was dayco from bursons, not yom chon from ebay, it actually seems quite impressive a part like that produced so cheaply.
_________________ Signature removed by moderator.signature must not exceed 120x500 pixles |
|||
| Top | |
|||
| Krytox |
|
|||
|
OZBMX wrote: haha, I think that's like 3 time what I paid for my ef one, and yes it was dayco from bursons, not yom chon from ebay, it actually seems quite impressive a part like that produced so cheaply. Try find a Yum-Cha XH tensioner. Whereas there is probably around 2000 EF's to every one XH. The price is very good considering its a 'major' item in the car.
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| OZBMX |
|
|||
|
ah yeah I'm basically commenting exactly what your saying.
_________________ Signature removed by moderator.signature must not exceed 120x500 pixles |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 25 guests |
