|
Waiila |
|
||
|
Hi guys I have just bought a 6 cyl xh falcon an I noticed that when the car reaches operating temperature there is water constantly cycling through the header tank via the small hoses that connect to the back of the expansion tank. Is this normal for the e series engines? I haven’t had much to do with the falcon engines that don’t have a cap on the radiator itself. I’ve changed the thermostat as the old one was had it but the water is still flowing the same.
Any input or experience with this would be much appreciated |
||
Top | |
GASSA |
|
||
|
{USERNAME} wrote: Hi guys I have just bought a 6 cyl xh falcon an I noticed that when the car reaches operating temperature there is water constantly cycling through the header tank via the small hoses that connect to the back of the expansion tank. Is this normal for the e series engines? I haven’t had much to do with the falcon engines that don’t have a cap on the radiator itself. I’ve changed the thermostat as the old one was had it but the water is still flowing the same. Any input or experience with this would be much appreciated that is normal gassa
_________________ When the clutch drops the bull s**t stops!!!!! |
||
Top | |
sooty72 |
|
|||
|
As Gazza said, that is normal for this design.
You will also see that the tanks does not need to be "full", mine seems happiest at about 3/4 full - if I overfill it, it just spits it out when it gets hot, and can actually loose more coolant than you'd think. It can sometimes take a while to get the right level. Cheers,
_________________ Yes, I own a Ute. No, I won't help you move! |
|||
Top | |
Waiila |
|
||
|
Thanks Guys thats good to know that its normal and not a blown head gasket
|
||
Top | |
Waiila |
|
||
|
Thanks Guys thats good to know that its normal and not a blown head gasket
|
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 3 guests |