|
| Fordxf351 |
|
|||
|
i have a 1992 Eb fairmont built (Aug/92) ,so im wondering if this model come with smartlock feature so i can unlock central locking Via Remote ,when i rang good old ford motor company i got a answer of "sorry sir i could not tell you from the top of my head " so yea fail.. i would appreciate any awnsers u guys could give me,if not is there a way to install it ??
|
|||
| Top | |
|||
| 93EB |
|
|||
Age: 47 Posts: 2485 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
Im sure they do mate. My neighbor has a 92 XR6 and it has smart lock. Soooo it should be remote capable.
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| Papa Smurf |
|
||
|
Ford lists them from 01/10/1992, you may be out of luck
|
||
| Top | |
||
| Fordxf351 |
|
|||
|
yeah looks that way mate the reason i'm wanting to be able to use remote central locking is my drivers door lock no longer triggers the central locking systems.but the passenger side door does i figured if that only stuffs up as well i'm in trouble,or is there a simple fix(tutorial)on this ,i tryed to remove the door panel but can't figure out how the inside door lock comes off to remove the panel..
|
|||
| Top | |
|||
| Troy |
|
||
|
well if it did you should know, smartlock on your dash would flash when turned off
|
||
| Top | |
||
| BenJ |
|
||
|
As advised above, early EB11 Falcons did not have smartlock. This also means, they did not have remote central locking.
In my old EB11, Feb 92, and in my current EB1, I installed an aftermarket alarm with remote central locking. BenJ
_________________ BenJ's EB T5 DOHC Ghia Wagon - Current Ride |
||
| Top | |
||
| Ben_Daui |
|
|||
|
My Feb 92 EB does not have smart lock fitted & my Dec 92 NC does have smart lock fitted.
_________________ MEMBER 1390 |
|||
| Top | |
|||
| 87SIlude |
|
||
|
Hey mate. To get the door card off. Remove all the screws around the door. Then in the handle and the thing next to it there will be3 circularplugs. 1 inthe handle and 2 iin the thing next to it. Get them out with a flathead screwdriver.
Then you will need a torx screwdriver to get them off. When they are out disconnect the door opener by simply twisting the handel and slipping out the rail. You have to takethe window winder off aswell. Before you do that tho wind yourwindow down. When it is all disconnected you have to pull the bottom of the door out and push/pull it up. Getting it off is tricky sometimes. Goodluck. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 3 guests |
