|
fiftyone |
|
|||
|
makes a big diff to the noise! i know. GO THE SPEED HOLES!
_________________ ** For Sale ** http://www.fordmods.com/ford-parts-for-sale-f17/assorted-e-series-parts-t124697.html |
|||
Top | |
EL1_Fairmont_Ghia |
|
||
|
I made the modifications to my airbox... only 3 holes but much larger than the ones shown at the the top of the page... it makes alot more noise up until 3500 rpm then it goes completely stock again... (very weird) it sounds like its has extractors in the 2- 3.5 rpm but after that goes quiet and back to stock... alot more throttle response and engine sounds healthier (breathing wise)... good cheap mod to perform.
_________________ EL1 fairmont ghia with damaged front bumper and right side skirt... due to drifting... has a small hole in the exhaust... shift kit from shiftkits.com.au |
||
Top | |
Joesau |
|
||
|
yeah the noise is much better. should here the car in the morning wen its cold lots of induction and at night.
|
||
Top | |
EBTS50 |
|
|||
|
Joesau wrote: i cut an 80 mm hole in the bottom of my airbox and im running a 90mm silicon pipe bout 75cm long to my front bar which faces incoming air direct. Goes way harder get heaps of air but. got the xr6t snorkle too.
looks good
_________________ Ba Stock As A Rock |
|||
Top | |
jdas |
|
||
|
ummm doesnt this defeat the purpose of having a filter as u r now by passing the original intake n the air is no longer passing thru the filter but direct into the pie to the throttle body??? no need for a high flow filter when u have no filtreation anyway hope u kept the receipt
_________________ negelecting my ute to ride my two wheeled rockets |
||
Top | |
jdas |
|
||
|
EL1_Fairmont_Ghia wrote: I made the modifications to my airbox... only 3 holes but much larger than the ones shown at the the top of the page... it makes alot more noise up until 3500 rpm then it goes completely stock again... (very weird) it sounds like its has extractors in the 2- 3.5 rpm but after that goes quiet and back to stock... alot more throttle response and engine sounds healthier (breathing wise)... good cheap mod to perform.
it is only going 2 sound healthier til u get a blocked injector from all the muck that can now pass through the throtle body, n again i must repeat dont bother spending ur money on a k&n panel filter that isnt going 2 do anything at all...
_________________ negelecting my ute to ride my two wheeled rockets |
||
Top | |
mrnasty |
|
|||
|
EL1_Fairmont_Ghia wrote: I made the modifications to my airbox... only 3 holes but much larger than the ones shown at the the top of the page... it makes alot more noise up until 3500 rpm then it goes completely stock again... (very weird) it sounds like its has extractors in the 2- 3.5 rpm but after that goes quiet and back to stock... alot more throttle response and engine sounds healthier (breathing wise)... good cheap mod to perform.
mine does the same, more noise till bout 3500 then back to normal, but the more noise under 3500 is mint!
_________________ Cougar Zero makes my pants fit nice. |
|||
Top | |
samftr |
|
|||
|
jdas wrote: ummm doesnt this defeat the purpose of having a filter as u r now by passing the original intake n the air is no longer passing thru the filter but direct into the pie to the throttle body??? no need for a high flow filter when u have no filtreation anyway hope u kept the receipt
two things here, they have made the holes in their air boxes BEFORE the air filter, so as per the factory the air is still filtered. Secondly there are two different types of air boxes shown here, one from an eb/ed series car and an ef/el car. Now the ef and el type have the air coming in through the bottom of the air box and up into the filter that way. and the ea, eb and ed have a log style intake manifold and they have the air coming in through the top of their air box, then it goes through the filter and out the bottom of the air box. hope that helps you out there jdas,
_________________ 175.7hp 15.5 @ 374,000km
|
|||
Top | |
jdas |
|
||
|
no only the ea-ed is before the filter the others seem 2 be below the filter which if im right is btween the lid and the box at the top?
_________________ negelecting my ute to ride my two wheeled rockets |
||
Top | |
samftr |
|
|||
|
just have another look at the pictures. ea - ed air comes in the bottom
ef -bf come in through the top this is due to the broadband inlet manifold
_________________ 175.7hp 15.5 @ 374,000km
|
|||
Top | |
samftr |
|
|||
|
they all have the filter in the middle, just the air flow is different.
_________________ 175.7hp 15.5 @ 374,000km
|
|||
Top | |
jdas |
|
||
|
ok i will wait 2 hear what happens cheers
_________________ negelecting my ute to ride my two wheeled rockets |
||
Top | |
HP hungry |
|
||
|
When I had my farimont engine in my ED I changed the airbox to EL and modified the snorkel to still flow in the top, I'll have to get some pics to show it off, I just sold the engine and intake to a mate who's now running it.
|
||
Top | |
fiftyone |
|
|||
|
jdas,have a better look at the first photo's i posted. the idea is the higher pressure on the outside will help force air through the filter insted of having it sucked through from an as equal pressured side *Warning, Science Content* (im a nerd), it also helps because as i said, i found there is a pocket of cold air that comes in from beside the left headlight on that side. should be there on all the ef el body styles. (not sure about xh's, i think they are the late e series style)
and the holes are from the pre filtration section. . . . . . . .
_________________ ** For Sale ** http://www.fordmods.com/ford-parts-for-sale-f17/assorted-e-series-parts-t124697.html |
|||
Top | |
EL1_Fairmont_Ghia |
|
||
|
all air on ef and els are sucked in through a snorkel to the bottom of the airbox... if all that series cut their holes in the airbox below the filter then it is still being filtered.. i am going to stick with a stock air filter as it filters the air better than the high performance ones (so i've heard). my car does get hot when idling at long traffic lights... but cools down quite quickly once moving again...
_________________ EL1 fairmont ghia with damaged front bumper and right side skirt... due to drifting... has a small hole in the exhaust... shift kit from shiftkits.com.au |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 3 guests |