AU I & II con rods have been replaced by the later AU ones (series III) and must be replaced in a set'
AU2 6200 A AU/BA/BF/FG standard, LPG up to 30/11/2002 $74.50
BA 6200 C BA/BF/FG LPG 01/12/2002 onwards $66.80
BA 6200 A BA/BF Turbo up to 30/04/2006 $72.20
BG 6200 A BF/FG Turbo from 01/05/2006 $59.80

what are the FG falcon remotes worth, i cant find just a remote by itself

Papa Smurf, what is the Ford price for a genuine Waterpump for EB-EL V8?
They are on Ebay for $135 for a genuine one at the moment, wondering if its worth getting one for a spare at that price.
Thanks

hi george
is the reverse light switch for the ef t5 ,5 speed still available???

Hey george,
I was wondering what are AU series II or III clear indicators worth?
And also the Chrome OHC INTECH badges for the front guards?
Thanks in advance

The white one is a mystery to me. To get at it, you need to take off the threaded nut off the end that goes into the pwr strg pump. The Threaded Nut is available new and so you have seen is the seal but, to replace that seal you have to get the threaded nut off, no can do simply. The only way to get that nut OFF is to hacksaw it off or use a nut cracker. But ya still will need to buy a NEW nut which BTW has the white seal inside ?? go figure.

You will need to buy a NEW nut part number F33C 3BF656BA $15.30. I am guessing that your hose is leaking at the back of the pump where the Pipe comes out? normal.

All you need to do is get the OLD one off (be careful not to cut too far) and put the NEW one on and it should fix the problem. The little rubber O ring goes on the end that screws to the rack, not really needed if it isn't leaking down there.

Early AU's had the same issue and in AU II they changed the nut fitting and seems to have fixed the problem. Our Used car guys used to do this ALL the time for leaking EL and AU we sold, cheaper than replacing the whole hose and pipe.

Side flashers AU3 13K309 A $18.70 ea
Badges ER 16098 A $20.14 each.

Hi,
newby here, does this nut work for an EB S-Pack as well or will i need to get a different nut
Cheers m8

Sorry matey but the nut for EA/EB/ED is not serviced for the high pressure hose, the nut came with the hose on those models.

dam, can i use the F33C3F656BA nut, or will i have to buy a new hose?
any help would be greatly appreciated