|
| Papa Smurf |
|
||
|
ashcook wrote: Are the pumps the same for the AU's? I have a heap of them. I may have a BA one but will have to see if it is ok. Will give that a crack first. They are the same as AU. |
||
| Top | |
||
| Papa Smurf |
|
||
|
EVL098 wrote: Could I please have the price and availability on the blinker/highbeam stork for an EL XR in grey please George? Dons is playing up and it looks like its a job I cant dodge any longer. Also would a grey drivers seatbelt still be available? The combo switch is available, $284.00 retail, unfortunately the Seat Belt is obsolete. |
||
| Top | |
||
| 80crm |
|
|||
|
How much for a set of injectors and harmonic balancer to suit AU series 3 XR8?
|
|||
| Top | |
|||
| Papa Smurf |
|
||
|
80crm wrote: How much for a set of injectors and harmonic balancer to suit AU series 3 XR8? There is just one Injector for series II/III, part number XL2Z 9F593 CA $242.00 each, blue ident, series I XS2Z 9F593 BA $71.90 each ident Orange. harmonic Balance F67Z 6312 AA $501.70. You can get these things on Ebay for MUCH less and at the moment our Dollar is equal to the American one so a good time to buy from OS 
|
||
| Top | |
||
| 80crm |
|
|||
|
No worries
|
|||
| Top | |
|||
| EDXR6-Poly |
|
|||
|
Papa Smurf wrote: EDXR6-Poly wrote: Hey George, Does ford still stock door rubbers? for an EF or are the EA-EL all the same? Mine are on there way out, they have a few tears and leak air once you start to get over 60kph All the door rubbers for E series are obsolete, you could try the AU type and see if you can make them fit? Just a thought would you have the E series door rubber part number I think the AU rubber part number is ERF25324A I was thinking to see if it maybe the same as EA-EL? If they are not available any idea where might sell them? cant seem to find anything on the net or auto shops?
_________________ AU2 engine with Hoppers head/cam performance package & spool rods / CP pistons ,Snort 1200 plenum, T56 Manual & Billet short shifter, Front & Rear Slotted rotors, Pedders lowered suspension, LSD and tuned with EMS stinger 4424 347rwkw THE ED XR6 IS BOOSTED |
|||
| Top | |
|||
| frd906n |
|
||
|
Best bet would be to try and get a set of rubbers from the wreckers or some where like that
_________________ Daily Driver, Series 1 Au Forte Quote: Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors
|
||
| Top | |
||
| Papa Smurf |
|
||
|
EDXR6-Poly wrote: Just a thought would you have the E series door rubber part number I think the AU rubber part number is ERF25324A I was thinking to see if it maybe the same as EA-EL? If they are not available any idea where might sell them? cant seem to find anything on the net or auto shops? At one stage I was considering using AU/BA door rubbers and just cut them and make them fit. You could use sikaflex to join them and maybe relocate the little clips. There is a company here in NSW called Spectrum Rubber, they have miriad selections of Rubbers. http://www.spectrumrubber.com.au/ |
||
| Top | |
||
| wolfiekun |
|
||
|
Hey there,
How much to get my hands on a brake light switch for an EF? Bugger of a thing broke today, after I was talking about it with someone else only last night. Thanks 
|
||
| Top | |
||
| fourL6 |
|
|||
|
are cruise control wiring looms the same between AU1 and AU2-3 (auto or manual)
iv heard yes and no.... i thought part numbers wouldnt lie Cheers Cam
_________________ Was - 2001 AUIII Ford Falcon Forte |
|||
| Top | |
|||
| nathanwillox |
|
||
|
Papa Smurf wrote: nathanwillox wrote: hey papa smurf just wondering, i been to my ford dealer and few wreckers, im trying to get 1 tickford au rim center cap as ive lost one, does ford still stock them and how much or where could i track one down? tx This price and part number are from a 17" wheel, ERTVE 1A065 A $133.00 each The 18" Azzuro wheel centre cap part number TAU3 1A065 A $128.00 each. tx alot =) |
||
| Top | |
||
| EDXR6-Poly |
|
|||
|
Papa Smurf wrote: EDXR6-Poly wrote: Just a thought would you have the E series door rubber part number I think the AU rubber part number is ERF25324A I was thinking to see if it maybe the same as EA-EL? If they are not available any idea where might sell them? cant seem to find anything on the net or auto shops? At one stage I was considering using AU/BA door rubbers and just cut them and make them fit. You could use sikaflex to join them and maybe relocate the little clips. There is a company here in NSW called Spectrum Rubber, they have miriad selections of Rubbers. http://www.spectrumrubber.com.au/ Just curious what are the AU/BA door rubbers worth each?
_________________ AU2 engine with Hoppers head/cam performance package & spool rods / CP pistons ,Snort 1200 plenum, T56 Manual & Billet short shifter, Front & Rear Slotted rotors, Pedders lowered suspension, LSD and tuned with EMS stinger 4424 347rwkw THE ED XR6 IS BOOSTED |
|||
| Top | |
|||
| phatba |
|
||
|
hi george, on the fg falcon, there is a splash shield sort of thing behind the rear tyres which connects the bumper to the chassis, and forms part of the inner wheel well. (not sure what the part is called) considering the gt has a different shapped bumper to the xt and the g series, is that part different too? my ford guy says they only make the one part for all fg's, but the ones on my g6e dont fit the gt bar im putting on. im thinking he could be full of it, which wouldnt be suprising as hes led me astray before.
|
||
| Top | |
||
| Papa Smurf |
|
||
|
wolfiekun wrote: Hey there, How much to get my hands on a brake light switch for an EF? Bugger of a thing broke today, after I was talking about it with someone else only last night. Thanks Part Number E73Z 13480 A $46.30 |
||
| Top | |
||
| Papa Smurf |
|
||
|
fourL6 wrote: are cruise control wiring looms the same between AU1 and AU2-3 (auto or manual) iv heard yes and no.... i thought part numbers wouldnt lie Cheers Cam The main difference is the Combination switch and the series 1 is different to that later models. The Dash wiring harness is the same weather it has cruise or not, there is a separate wiring harness for the clutch switch which is still available new. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 1 guest |
