|
| TimmyA |
|
|||
|
When we put the Lokka in my ED diff there was no gasket on there from factory and we used Nissan Threebond when replaced the hat... Best s**t ever and never had a problem...
 Cheers, Tim
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| Papa Smurf |
|
||
|
fiend wrote: Can I get a pricePart number for this wagon only gasket please? Part number is EC 4036 A. |
||
| Top | |
||
| Papa Smurf |
|
||
|
smee wrote: Hi Papa, could you tell me the p/n & price for AU radiator overflow tank & low water level sender, also the head temperature sender at the back please. The Reservoir is ER 8a080 B $142.40, sender EA 10K888 A $61.40. These are retail prices. |
||
| Top | |
||
| EDXR6-Poly |
|
|||
|
Hey George, whats a new low coolant sensor worth for a EL fairmont, the one that screws into the side of the header tank, Do they still make them?
_________________ AU2 engine with Hoppers head/cam performance package & spool rods / CP pistons ,Snort 1200 plenum, T56 Manual & Billet short shifter, Front & Rear Slotted rotors, Pedders lowered suspension, LSD and tuned with EMS stinger 4424 347rwkw THE ED XR6 IS BOOSTED |
|||
| Top | |
|||
| Papa Smurf |
|
||
|
Yes they do, as above EA 10K888 A $61.40
|
||
| Top | |
||
| EDXR6-Poly |
|
|||
|
Opps sorry I didnt see the above post LOL, Do they still make the Coolant header tank too (for EA-EL) with the sensor hole?
_________________ AU2 engine with Hoppers head/cam performance package & spool rods / CP pistons ,Snort 1200 plenum, T56 Manual & Billet short shifter, Front & Rear Slotted rotors, Pedders lowered suspension, LSD and tuned with EMS stinger 4424 347rwkw THE ED XR6 IS BOOSTED Last edited by EDXR6-Poly on Thu Dec 23, 2010 4:25 pm, edited 1 time in total. |
|||
| Top | |
|||
| smee |
|
|||
|
Thanks Papa, what about the AU head temperature sender at the back still available ?
and whats the price diff for Motorcraft AGS23CC & Denso W20EX-U plugs please, thankyou. |
|||
| Top | |
|||
| Papa Smurf |
|
||
|
EDXR6-Poly wrote: Oops sorry I didn't see the above post LOL, Do they still make the Coolant header tank too (for EA-EL) with the sensor hole? Yes they do still make them, part number is EDC 8A084 B $114.00 |
||
| Top | |
||
| Papa Smurf |
|
||
|
smee wrote: Thanks Papa, what about the AU head temperature sender at the back still available ? and whats the price diff for Motorcraft AGS23CC & Denso W20EX-U plugs please, thank you. I know we have both plugs at work, these are for LPG? EF/EL list J16 ARU11 for LPG. The AU LPG plug is AGS 23 C08 and costs the same as the W20 EXRU. Sorry I forgot the Sender, I was a little busy this morning at work Part number XL3Z 6G004 AA $70.00
|
||
| Top | |
||
| smee |
|
|||
|
Yes straight LPG for AU1 but may be changing to AU2 coilpack if I can get the different connector plug. I'm guessing the denso W20EXRU has the resistor and W20EX-U doesn't & with the AGS23c08 / 23CC are these both resistor type plugs too? Thanks m8, & have a great (& well deserved!) holiday. Cheers
|
|||
| Top | |
|||
| phil545 |
|
|||
|
hey George
Hope you are well mate, are you able to tell me what size the front and rear sway bars are on the BF SR sedan (can't remember if the SR had a sport suspension pack of if they are the same as the XT) Cheers Phil
_________________ I hate arriving at my destination as then I have to get out of my car! |
|||
| Top | |
|||
| Papa Smurf |
|
||
|
phil545 wrote: hey George Hope you are well mate, are you able to tell me what size the front and rear sway bars are on the BF SR sedan (can't remember if the SR had a sport suspension pack of if they are the same as the XT) Cheers Phil The sway bar for standard, F6, GT is 22mm, the only thicker one is the BA wagon @ 26mm. |
||
| Top | |
||
| OZBMX |
|
|||
|
Interesting do they use a different mounting brackets then, because the mount brackets on them are made of plasterceine(sp).
 just about everyone I've seen come in is p****d, easy enough fixed but still.
_________________ Signature removed by moderator.signature must not exceed 120x500 pixles |
|||
| Top | |
|||
| kickn_it |
|
||
|
Hey paps, i rang ford with regards to getting some genuine lash adjusters for my EF xr6. Now the first thing they told me was that the inlet were different to the exhaust, and that the inlet were obselete. To top it off the woman told me that the lifters come in at $102 EACH. im sorry but thats a bit rich considering my engine builder can get them aftermarket for $8.50. Can you confirm price, availability and the difference if any between inlet and exhaust.
Cheers mate.
_________________
|
||
| Top | |
||
| phil545 |
|
|||
|
Papa Smurf wrote: phil545 wrote: hey George Hope you are well mate, are you able to tell me what size the front and rear sway bars are on the BF SR sedan (can't remember if the SR had a sport suspension pack of if they are the same as the XT) Cheers Phil The sway bar for standard, F6, GT is 22mm, the only thicker one is the BA wagon @ 26mm. thanks for getting back to me mate, guess 27 up front and 22 on the rear will work a treat then
_________________ I hate arriving at my destination as then I have to get out of my car! |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 5 guests |
