|
| Papa Smurf |
|
||
|
TimmyA wrote: Hey George, My custom cruise cable played up today... It is an EF/EL actuator running a log manifold and throttle body in my ED... Then I had a brain storm... The XH runs a log manifold... And I would bet it runs the EF/EL cruise actuator... If so how much is the cruise cable and is it still available? It is basically just a longer EF/EL cable... Cheers, Tim Unfortunately, the cable you are refering to is now obsolete. |
||
| Top | |
||
| jonathon |
|
|||
|
gday george recived item yesterday.
cheers
_________________ Owning 1 of 84,847 ebII. |
|||
| Top | |
|||
| phil545 |
|
|||
|
Hi George
How much for a genuine o2 sensor for a BF falcon - the first one that plugs into the extractors not the second one near the cat. Mine has never been replaced and thinking its a good idea before i get it tuned (no need for 2nd one as i will get that turned off as part of the tune) Thanks for the help - appreciate at it Cheers Phil
_________________ I hate arriving at my destination as then I have to get out of my car! |
|||
| Top | |
|||
| Papa Smurf |
|
||
|
phil545 wrote: Hi George How much for a genuine o2 sensor for a BF falcon - the first one that plugs into the extractors not the second one near the cat. Mine has never been replaced and thinking its a good idea before i get it tuned (no need for 2nd one as i will get that turned off as part of the tune) Thanks for the help - appreciate at it Cheers Phil The Genuine one is $440.00  Can get you a non genuine one for $88.00
|
||
| Top | |
||
| phil545 |
|
|||
|
Papa Smurf wrote: phil545 wrote: Hi George How much for a genuine o2 sensor for a BF falcon - the first one that plugs into the extractors not the second one near the cat. Mine has never been replaced and thinking its a good idea before i get it tuned (no need for 2nd one as i will get that turned off as part of the tune) Thanks for the help - appreciate at it Cheers Phil The Genuine one is $440.00 Can get you a non genuine one for $88.00Holy hell $440!!! i was thinking like $150 hahahah, well I think it will have to be a non genuine one. Thanks alot mate, won't need it for a while so ill contact you when i do and sort it out Cheers Phil
_________________ I hate arriving at my destination as then I have to get out of my car! |
|||
| Top | |
|||
| EDXR6-Poly |
|
|||
|
Hi Again Papa Smurf,
I am about to replace my clutch in my ED but thinking I should replace the clutch pivot pin and wear plate that holds the pivot arm to the bell housing, any chance I could get a price on them please and organise them to be sent to me?
_________________ AU2 engine with Hoppers head/cam performance package & spool rods / CP pistons ,Snort 1200 plenum, T56 Manual & Billet short shifter, Front & Rear Slotted rotors, Pedders lowered suspension, LSD and tuned with EMS stinger 4424 347rwkw THE ED XR6 IS BOOSTED |
|||
| Top | |
|||
| Papa Smurf |
|
||
|
EDXR6-Poly wrote: Hi Again Papa Smurf, I am about to replace my clutch in my ED but thinking I should replace the clutch pivot pin and wear plate that holds the pivot arm to the bell housing, any chance I could get a price on them please and organise them to be sent to me? The ONLY one you can get is the AU plate and stud. The stud is the same but the plate is different. If I remeber correctly, you can use the AU one, I am sure that TROYMAN did. You will be looking at approx $32.00 |
||
| Top | |
||
| EDXR6-Poly |
|
|||
|
Papa Smurf wrote: EDXR6-Poly wrote: Hi Again Papa Smurf, I am about to replace my clutch in my ED but thinking I should replace the clutch pivot pin and wear plate that holds the pivot arm to the bell housing, any chance I could get a price on them please and organise them to be sent to me? The ONLY one you can get is the AU plate and stud. The stud is the same but the plate is different. If I remeber correctly, you can use the AU one, I am sure that TROYMAN did. You will be looking at approx $32.00 im using the AU bellhousing on my T5 as the motor is a AU anyway, Ill PM you about it.
_________________ AU2 engine with Hoppers head/cam performance package & spool rods / CP pistons ,Snort 1200 plenum, T56 Manual & Billet short shifter, Front & Rear Slotted rotors, Pedders lowered suspension, LSD and tuned with EMS stinger 4424 347rwkw THE ED XR6 IS BOOSTED |
|||
| Top | |
|||
| TimmyA |
|
|||
|
George,
Speedo gear to suit the XR 3.45 diff with 16" wheels... Black gear 23 teeth for the e series? Dad thought it was the Grey 22T version but is for 15" wheels... And he said it is not available... Just wonder if it isn't can't you see any sitting anywhere in Ford? Do you have any info about the drive gear in the gear box as to what colour drive gear will mesh properly with each of the coloured gears? And out of desperation, definitely none of those cruise control cables just lying around anywhere I can ring a specific dealer about? Cheers, Tim
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| TimmyA |
|
|||
|
Maybe... Gearbox has a longer extension housing so may differ?
If they are the same if George can enlighten us I'll get one off you... Cheers, Tim
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| Papa Smurf |
|
||
|
TimmyA wrote: George, Speedo gear to suit the XR 3.45 diff with 16" wheels... Black gear 23 teeth for the e series? Dad thought it was the Grey 22T version but is for 15" wheels... And he said it is not available... Just wonder if it isn't can't you see any sitting anywhere in Ford? Do you have any info about the drive gear in the gear box as to what colour drive gear will mesh properly with each of the coloured gears? And out of desperation, definitely none of those cruise control cables just lying around anywhere I can ring a specific dealer about? Cheers, Tim Matey, the correct gear is the 23 tooth gear, part number XE 17271 F $13.70. The Auto Drive gear is XA 17285 E $26.20 and is yellow, the Manual is XFP 17285 A Maroon $9.40. As to the cable, the part number was EHC 9A820 B but NO ONE in Australia has one, I checked. The original manufacturer would have been Flexdrive cables, they ahve an office here in NSW and they MAY be able to help or might be able to make one for you either from sample or they might even still have the original specs. http://www.fdrive.com.au/contacts/nsw.php AU's use the same gears |
||
| Top | |
||
| TimmyA |
|
|||
|
George...
After doing the calcs a 15" tire is way closer a 17 than a 15" tire... As such the grey 22T gear would be the better one to own... Should've worked that out first... Which is the one Lanham's reckon is obsolete? Any lying around anywhere else you can see? Thanks for all that info on the cable... Will suss it out  Cheers, Tim
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| ausedwagon |
|
|||
|
i also need a new spedo gear. i have the green one now and ive put a 3.45 lsd in so my spedo is bout 10% high. what color do i need to corect it?
_________________ 94 White ED Wagon |
|||
| Top | |
|||
| Johnson stroker |
|
|||
|
Papa, can you quote me an unusual one..
Oil pressure sender for 95 Probe, price and avail? Cheers, Dave
_________________
|
|||
| Top | |
|||
| Papa Smurf |
|
||
|
ausedwagon wrote: i also need a new speedo gear. I have the green one now and i've put a 3.45 lsd in so my speedo is bout 10% higher. what color do I need to corect it? Matey, tyre size please
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 2 guests |
