|
Papa Smurf |
|
||
|
{USERNAME} wrote: So the plates are simply screwed into the grommets? Thanks very much That's right. |
||
Top | |
mattymc |
|
||
|
Hey papa smurf,
Got another one for you. El xr6 300kpa fuel pressure regulator. I know you most likely can get them anymore but would you have a part number on it. Is there any way to tell if its a 300kpa compared to a 270kpa? Thanks again |
||
Top | |
Papa Smurf |
|
||
|
Like Ben said, they are no longer available. Part number is EFTVE 9C968A and you could try New Oak or Bayfords ? There is no listing on the KPA in the Microcat, Ford don't think it necessary for silly parts blokes to know the technical details
|
||
Top | |
jonathon |
|
|||
|
gday price and availability on eb ed headlights left and right side?
thanks
_________________ Owning 1 of 84,847 ebII. |
|||
Top | |
Papa Smurf |
|
||
|
{USERNAME} wrote: gday, price and availability on eb ed headlights left and right side? thanks They are still available NEW EAA 13005A R/H and EAA 13006A L/H, price is $217.00 each. These guys have them available BRAND NEW non Genuine of course, for $46.00 each side and they are in Victoria, maybe they are cheaper to get to you by post as to send here to NSW they want $20.00. https://www.sports-lights.com/product_i ... 78d363cd4f |
||
Top | |
fourL6 |
|
|||
|
Me again
Im having a bit of trouble with the front seats of the misses BA Mont, iv picked up BA1 XR (black/grey tire pattern) door trims and rear seat but cant seem to find any front seats with side impact airbags, just wondering if i could get the XR covers and replace the fairmont ones (but keep the mont frame and airbags) Not sure if the foam cushions the same either? Cheers Cam
_________________ Was - {DESCRIPTION} |
|||
Top | |
93EB |
|
|||
Age: 47 Posts: 2486 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
Hi Papa Smurf are mudflaps front and rear still available for a series 2 AU Ghia 2000 model? Are they the same as the BA ones? Prices please.
Thanks Shaun.
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
Top | |
Papa Smurf |
|
||
|
{USERNAME} wrote: Hi Papa Smurf are mudflaps front and rear still available for a series 2 AU Ghia 2000 model? Are they the same as the BA ones? Prices please. Thanks Shaun. Yes they are available and no, the BA ones are different. The front ones are ER 16268A $40.00 and the Rear AU2 16360A $57.50. The front ones are for cars that don't have side skirts. |
||
Top | |
Bradelz77 |
|
||
|
Papa Smurf,
Do you guys sell those front brake sliders? Also how much on a EF Ashtray and EF Fairmont drink holder unit? Thanks mate |
||
Top | |
ian_d |
|
||
|
Hi Papa,
Have some more queries for you. 1. I was chasing a replacement driver's door external 'blackout' (not sure its official title) to suit an AUII. I was given one (part number AU2 F20554A). Only problem is it doesn't fit. The clip up the top of the new blackout is no where near close to hole in the body the current one clips in to. It also doesn't appear to fit correctly against the door rubbers. Is this part number correct? 2. Do Ford still stock the heat shield socks they fitted to the AU XR8s to protect the plugs/leads from the extractors? and... 3. Do you have a part number for mud flaps to suit an AUII XR8 with the optioned Tickford bodykit? Cheers mate, Ian |
||
Top | |
Papa Smurf |
|
||
|
{USERNAME} wrote: Papa Smurf, Do you guys sell those front brake sliders? Also how much on a EF Ashtray and EF Fairmont drink holder unit? Thanks mate The brake sliders I am guessing you mean the angular plates that go on the Stub axle where the Caliper mounts?Yes they are available part number EA 2K399A $2.85 each x 4. EF/EL console Drink holder is avialable. For grey one EF F13562A1 $18.50 and for the Cappuccino one EF F13562A8 $12.90. The ashtray is obsolete in Grey but you may still be able to get the Cappucinno one EH F04810A8 $31.20 and it is the Mondeo type and may NOT fit the surround. |
||
Top | |
Papa Smurf |
|
||
|
{USERNAME} wrote: Hi Papa,
Have some more queries for you. 1. I was chasing a replacement driver's door external 'blackout' (not sure its official title) to suit an AUII. I was given one (part number AU2 F20554A). Only problem is it doesn't fit. The clip up the top of the new blackout is no where near close to hole in the body the current one clips in to. It also doesn't appear to fit correctly against the door rubbers. Is this part number correct? The NUMBER is correct but maybe a bad one? it could be a series 1 type. Maybe you could take it back and get them to change it. These are the same from AUII to BF 2. Do Ford still stock the heat shield socks they fitted to the AU XR8s to protect the plugs/leads from the extractors? There is a part number got the 5.0L V8 in the F series E1TZ 12A406A but it is shown as not available anymore. You may be able to go to an American Ford site and they may still be able to supply for you, I can't give you a price though. Number 14 in the pic Attachment: plugs.JPG and... 3. Do you have a part number for mud flaps to suit an AUII XR8 with the optioned Tickford bodykit? AU3 16268KTA front and AU2 16360KT rear, but both are no longer available. Cheers mate, Ian |
||
Top | |
ian_d |
|
||
|
Thanks mate. I wonder if they are series one blackouts then? They are definitely different to the ones on the XR6 I used to have as well.
|
||
Top | |
Papa Smurf |
|
||
|
{USERNAME} wrote: Thanks mate. I wonder if they are series one blackouts then? They are definitely different to the ones on the XR6 I used to have as well. The AU I type use pop rivets to hold the mould at the Top and Bottom of it. |
||
Top | |
ian_d |
|
||
|
Must be different them, both of the variants I have clip in.
Cheers. |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 1 guest |