|
| Papa Smurf |
|
||
|
{USERNAME} wrote: hi papa smurf do they still have the clip that holds the high beam light onto the headlight assembly/bracket? as my left high beam is loose on my el xr6 cheers Sorry matey but Ford never serviced it. |
||
| Top | |
||
| frankieh |
|
|||
|
Hi Mr Smurf,
EL ghia.. the cruise control cable has a little plastic leg on the end, I snapped mine in a stupid fit of "why won't this damn thing unclip when I had it off fine yesterday.) I have the old foot somewhere in the shed if you need a part number, but basically it clips into the end of the cable and on the end of that is a cup that clips onto the throttle butterfly. Any idea if they are replaceable and what they'd cost? ta Frank |
|||
| Top | |
|||
| Papa Smurf |
|
||
|
{USERNAME} wrote: Hi Mr Smurf, EL ghia.. the cruise control cable has a little plastic leg on the end, I snapped mine in a stupid fit of "why won't this damn thing unclip when I had it off fine yesterday.) I have the old foot somewhere in the shed if you need a part number, but basically it clips into the end of the cable and on the end of that is a cup that clips onto the throttle butterfly. Any idea if they are replaceable and what they'd cost? ta Frank Well, I am guessing that what you want is a part of the end of the cable? Anyway, any parts on the cable are not serviced and you are going to need a NEW cable, fortunately they are still available EF 9A820 A $61.90 Attachment: Cruise.JPG
|
||
| Top | |
||
| frankieh |
|
|||
|
That is both a bummer and good news at the same time.
bummer because the cruise control cable looks new except for the tip.. and if I was gonna replace a cable, I'd get a new throttle as that one has lost all its plastic cover and looks as ugly as sin. still, guess I am gonna replace both. thanks muchly mr Smurf. cheers Frank |
|||
| Top | |
|||
| Scaffy |
|
|||
|
Just found this thread, awesome!
G'day Papa Smurf, Can you tell me if the starter motor on all BA Falcons with 4speed auto, 6cyl and V8, is the same part number? Cheers
_________________ Trickflow Street Heat top end kit, 70mm BBK TB & EGR, 24lb injectors, Underdrives & 3.73s: 275rwhp - 13.15@105mph NA / 12.37@116mph N20 |
|||
| Top | |
|||
| fairlane6970 |
|
|||
|
Hey George, do they still service the rear trailing arm bushes for the NF? and what is the damage please. cheers mate
_________________
|
|||
| Top | |
|||
| Papa Smurf |
|
||
|
{USERNAME} wrote: Just found this thread, awesome! G'day Papa Smurf, Can you tell me if the starter motor on all BA Falcons with 4speed auto, 6cyl and V8, is the same part number? Cheers Sorry matey but they are different 
|
||
| Top | |
||
| Papa Smurf |
|
||
|
{USERNAME} wrote: Hey George, do they still service the rear trailing arm bushes for the NF? and what is the damage please. cheers mate The ordinary lower bushes for the NF are ED 5K792 C $29.00 each, for sports type suspension EFTVE 5K792 A $36.50 each and the Fairlane By Tickford EETVE 5K792 A $90.00 each. The Upper Bushes are EF 5A638 A $58.00 each. We carry the standard ones in Stock. |
||
| Top | |
||
| knowsfords |
|
||
|
Hey Papa, how much are the air filters for the BA i6's.
Thanks. |
||
| Top | |
||
| Vic |
|
|||
|
Mr Smurf.
Are there any Intermediate Shafts ( steering ) still available for the EL? If so, what do they cost?
_________________ 5.6L of carbon footprint. |
|||
| Top | |
|||
| Papa Smurf |
|
||
|
{USERNAME} wrote: Hey Papa, how much are the air filters for the BA i6's. Thanks. Air filter element for BA VCT EFI BA 9601 A $35.00, BA LPG BA 9601 B $45.00 |
||
| Top | |
||
| Papa Smurf |
|
||
|
{USERNAME} wrote: Mr Smurf. Are there any Intermediate Shafts ( steering ) still available for the EL? If so, what do they cost? I am off sick at the moment but on Monday I will look to see if I can locate one for you. They are obsolete but another dealer may still have one. They were around $350.00 - $400.00 |
||
| Top | |
||
| TerroristGHIA |
|
|||
|
Hey george,
I have a little tricky question. Do you happen to know the travel and bore diameter of the AU11 twin piston calipers. I am chashing up the amount of fluid that is pushed by the front twin calipers for a reference. This is to engineer my brake upgrade. I am now running AU11 master/booster and rear calipers, but need the specs for the fronts for the engineer. Oh yea, and hope you get well soon.  Cheers Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| skidder |
|
|||
|
Hey George,
Chasing the bracket that lives on the front bar of t1 te50, on the passenger side at the bar's top corner at the wheel arch. Fingers crossed it is the same as normal bumpers... Thanks Nick
_________________ {USERNAME} wrote: Cramping in the hand from having it on your Wang for an excessive period of time is a definate con. Seriously do people google "f**k up modifications for Fords owned by Jews" and get linked straight to this site nowadays? AU,factory fitted tickford kit/IRS, t5,Sports ryder/KYB: gone. |
|||
| Top | |
|||
| Papa Smurf |
|
||
|
{USERNAME} wrote: Hey george, I have a little tricky question. Do you happen to know the travel and bore diameter of the AU11 twin piston calipers. I am chashing up the amount of fluid that is pushed by the front twin calipers for a reference. This is to engineer my brake upgrade. I am now running AU11 master/booster and rear calipers, but need the specs for the fronts for the engineer. Oh yea, and hope you get well soon. Cheers Brett Unfortunately I can't find the info for you, maybe you could contact PBR and see if they could help? A phone call to Ford gave no relief either.
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 2 guests |
