|
| Benny D |
|
|||
|
hey papa smurf.
just wantin to know if the brake hoses the rubber bits on a ba falcon v8 fronts are the same as on a ba falcon 6cyl fronts. just a base model v8. not a premo brake/brembo. thanx.
_________________ BA XT V8. Ice Mint. 18" Speedys. XR6T LSD. Full Pacemaker twin 2 1/2inch Stainless Steel system. Custom CAI. Black XR interior with white trimming. Powerbond underdrive kit 25%. |
|||
| Top | |
|||
| kwaussiekid |
|
||
|
G'Day George. I have a MK1 BAXR6,with low end head unit- black, small screen. All the wiring is available for tweeters, and subbie and amp. I have already fitted tweeters, and they work well. After plugging in the amp and subbie, they failed to work. I am told to fit the high end colour screen unit, and all will work. Is this true? Thanks in advance.
_________________ The older I get the better I was! |
||
| Top | |
||
| Papa Smurf |
|
||
|
{USERNAME} wrote: G'Day George. I have a MK1 BAXR6,with low end head unit- black, small screen. All the wiring is available for tweeters, and subbie and amp. I have already fitted tweeters, and they work well. After plugging in the amp and subbie, they failed to work. I am told to fit the high end colour screen unit, and all will work. Is this true? Thanks in advance. As far as I know that is so. You might get a better insight from ASL Automedia in Vic, they are the FORD agents for the ICC units. http://www.aslautomedia.com.au/ |
||
| Top | |
||
| Papa Smurf |
|
||
|
{USERNAME} wrote: Hey Papa Smurf. Just wanting to know if the brake hoses, the rubber bits, on a BA falcon V8 fronts are the same as on a BA falcon 6cyl fronts. Just a base model v8. not a premo brake/brembo. thanx. Yes they are the same, the NEW Ford ones have a steel spiral around the rubber. Part number is BAF 2078 B $83.50 each retail. |
||
| Top | |
||
| Papa Smurf |
|
||
|
{USERNAME} wrote: Hi George, Can I please have a price on the FG tray back ute lights? And do they come with the mounting brackets? Cheers  Ash, the mount brackets are still the same from AU to FG. The lamps are BGC 13K465 A L/H and the R/H is BGC 13K464 A $191.00 each. |
||
| Top | |
||
| Benny D |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: Hey Papa Smurf. Just wanting to know if the brake hoses, the rubber bits, on a BA falcon V8 fronts are the same as on a BA falcon 6cyl fronts. Just a base model v8. not a premo brake/brembo. thanx. Yes they are the same, the NEW Ford ones have a steel spiral around the rubber. Part number is BAF 2078 B $83.50 each retail. thank you very much. makes my decisions ezyer.
_________________ BA XT V8. Ice Mint. 18" Speedys. XR6T LSD. Full Pacemaker twin 2 1/2inch Stainless Steel system. Custom CAI. Black XR interior with white trimming. Powerbond underdrive kit 25%. |
|||
| Top | |
|||
| OZBMX |
|
|||
|
Hey George Just quickly chasing a quick price on the master cylinder, and line for a ba clutch system.
Cheers Joel H.
_________________ Signature removed by moderator.signature must not exceed 120x500 pixles |
|||
| Top | |
|||
| Papa Smurf |
|
||
|
{USERNAME} wrote: Hey George Just quickly chasing a quick price on the master cylinder, and line for a BA clutch system. Cheers Joel H. The line and hose for a 5 speed is BA 7A512 K $236.00 and the 6 speed BA2 7A512 A $192.00, this is the line that goes to the slave cyl. M/Cyl is BA 7A543 A $365.00 and reservoir BA 7A542 A $52.00. Low Pressure hose from M/Cyl to Res BA 7A512 B $36.00 and high pressure hose is BA 7A512 A is $82.50 |
||
| Top | |
||
| Papa Smurf |
|
||
|
{USERNAME} wrote: Hi George, Any chance of one of these floating around? B9AZ 6A630 C I would think not and even if there was it'll be some silly price. Mine is a bit damaged. Cheers I will have to find out for you, I am not at work for 2 weeks. I checked the number through Ford and it is an unknown number here in Aus. I found this on Ebay http://cgi.ebay.com/ebaymotors/NOS-FORD ... 0537063928 |
||
| Top | |
||
| Benny D |
|
|||
|
hey papa smurf. just wanto confirm the oxy sensor for ba falcon.
Are they the same in the 6cyl as the 8cyl? Thnx.
_________________ BA XT V8. Ice Mint. 18" Speedys. XR6T LSD. Full Pacemaker twin 2 1/2inch Stainless Steel system. Custom CAI. Black XR interior with white trimming. Powerbond underdrive kit 25%. |
|||
| Top | |
|||
| FordAUte |
|
||
|
Chasing new wiper arms for my "01 auII xr6... any help would be appreciated.
thanks
_________________ "08 XR6T Ute |
||
| Top | |
||
| Papa Smurf |
|
||
|
{USERNAME} wrote: hey papa smurf. just want to confirm the O2 sensor for BA falcon. Are they the same in the 6cyl as the 8cyl? Thnx. Yes they are, the only different one is for the Turbo. |
||
| Top | |
||
| Papa Smurf |
|
||
|
{USERNAME} wrote: Chasing new wiper arms for my "01 AUII xr6... any help would be appreciated. thanks The right hand arm is ER 17526 A$34.60 and the left is ER 17527 A $33.00 The Wiper Blade assy is BA 17528 A $32.95 each. Attachment: Wipers.JPG
|
||
| Top | |
||
| Benny D |
|
|||
|
thanx. incredibly knowledgable as always.
_________________ BA XT V8. Ice Mint. 18" Speedys. XR6T LSD. Full Pacemaker twin 2 1/2inch Stainless Steel system. Custom CAI. Black XR interior with white trimming. Powerbond underdrive kit 25%. |
|||
| Top | |
|||
| mattymc |
|
||
|
Hey Papa Smurf,
Would you happen to know if ford still sell ef/el manuals gear boots and surrounds and the part numbers?. Cheers |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 3 guests |
