|
| Papa Smurf |
|
||
|
{USERNAME} wrote: George Are the foam gaskets that go between the boot spoiler and bootlid on a Series 1 EL XR8 still available? Cheers Matt Unfortunately these gaskets are way obsolete. There is not one dealer anywhere that has them. |
||
| Top | |
||
| Papa Smurf |
|
||
|
{USERNAME} wrote: Hi Papa Smurf, This is the list: Rear quarter windows - both sides Side window rubbers/runners - all four doors Side window/door trim (the black bit at the base of the window at the hip line of the door - butts up against the mirror and rear quarter glass) - all four doors Front windscreen side moulds - L + R Door seal - the one that is attached to the turret of the car and runs from about the window line front to back - both sides of car Windscreen cowl/scuttle panel - both parts including screw covers Windscreen wiper arms - both sides including bolt covers Windscreen washer jets x 2 Thanks in advance, Nic Nic, you are right, there isn't much left for these. What you can still buy I will list. N/S/F Bailey channel EF F21597 B $143.20 O/S/F belt wetherstrip EF F21452 A $97.80 N/S/F belt wetherstrip EF F21453 A $66.00 N/S/R belt wetherstrip EF F25597 A $86.40 O/S/R belt wetherstrip EF F25596 A $88.65 O/S scuttle cover EH F02222 A $121.60 N/S scuttle cover EH F02223 A $121.60 O/S Wiper Arm EL 17526 A $29.90 Washer jets E9JY 17603 A $20.20 ea the covers for the wiper arms are obsolete but we have 1 of each in stk O/S ED F04178 A $3.10 N/S ED F04179 A $3.10 The Qtr windows, 1 is available still from for and the other is showing as being kept by 4 dealers. The N/S/R qtr is EL F25831 A $204.40 available from Ford O/S/R EL F25830 A $202.40 is available from 4 dealers? Kloster Ford in Newcastle, Motor Traders (SA), Coventrys (WA), Lynford (WA). Everything else is long dead. |
||
| Top | |
||
| FAIRV8 |
|
|||
|
Hi Papa,
Hope you can supply me with information regarding a gasket for between the inlet manifold and throttle body? I need to replace the throttle body as the one currently fitted is for LPG and I've had the LPG system removed. I'm sure the model vehicle doesn't matter but it's a 98 Fairlane Ghia V8. Any further info you may need please let me know and I thank you in advance. 
|
|||
| Top | |
|||
| Papa Smurf |
|
||
|
{USERNAME} wrote: Hi Papa, Hope you can supply me with information regarding a gasket for between the inlet manifold and throttle body? I need to replace the throttle body as the one currently fitted is for LPG and I've had the LPG system removed. I'm sure the model vehicle doesn't matter but it's a 98 Fairlane Ghia V8. Any further info you may need please let me know and I thank you in advance. If it is an EL/NL V8 type they are obsolete from Ford, part number F1RE 9E933 AA The AU ones is still available, part number F67Z 9E936 AA $22.70 |
||
| Top | |
||
| FAIRV8 |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: Hi Papa, Hope you can supply me with information regarding a gasket for between the inlet manifold and throttle body? I need to replace the throttle body as the one currently fitted is for LPG and I've had the LPG system removed. I'm sure the model vehicle doesn't matter but it's a 98 Fairlane Ghia V8. Any further info you may need please let me know and I thank you in advance. If it is an EL/NL V8 type they are obsolete from Ford, part number F1RE 9E933 AA The AU ones is still available, part number F67Z 9E936 AA $22.70 Ah damn... Yeah I was after one for an NL... I doubt the AU/NU V8 one will fit an NL... I have found that the part number you have supplied can be found on the www.fordparts.com website... Would this be the same thing? I have searched for both out of curiousity, the NL one is worth 46c and the AU one is worth $14. Thoughts? Cheers. |
|||
| Top | |
|||
| Johnson stroker |
|
|||
|
hi George,
I need a part number and price for a 2001 NU Ghia electric aerial. All the best. Dave
_________________
|
|||
| Top | |
|||
| wild-el |
|
||
|
might be a stupid question but can you get front and rear el tikky kit?and how much?
_________________ EL xr6,standard a** au motor,hi-tech headers, 2 1/2inch red back,,Tikky kitted and wingless,Black GT-P's,on ultra lows and still too high |
||
| Top | |
||
| bry40l |
|
|||
|
{USERNAME} wrote: might be a stupid question but can you get front and rear el tikky kit?and how much? most of the e series parts are obsolete from ford and you need to find second hand or aftermarket
_________________ BF XR6 |
|||
| Top | |
|||
| wild-el |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: might be a stupid question but can you get front and rear el tikky kit?and how much? most of the e series parts are obsolete from ford and you need to find second hand or aftermarket hahaha as i said stupid question.its just hard to find em.
_________________ EL xr6,standard a** au motor,hi-tech headers, 2 1/2inch red back,,Tikky kitted and wingless,Black GT-P's,on ultra lows and still too high |
||
| Top | |
||
| Papa Smurf |
|
||
|
{USERNAME} wrote: hi George, I need a part number and price for a 2001 NU Ghia electric aerial. All the best. Dave Do you actually need the WHOLE aerial? You can buy the mast and rope. The mast and rope is NR 18814 A $109.80, the Aerial assy NR 18813 A $300.80 |
||
| Top | |
||
| Papa Smurf |
|
||
|
{USERNAME} wrote: Ah damn... Yeah I was after one for an NL... I doubt the AU/NU V8 one will fit an NL... I have found that the part number you have supplied can be found on the http://www.fordparts.com website... Would this be the same thing? I have searched for both out of curiousity, the NL one is worth 46c and the AU one is worth $14. Thoughts? Cheers. The F1RE 9E933 AA is the same the world over. The gasket that goes between the inlet Manifold and the EGR Spacer is the same EF/EL/AU but the spacer is different. I have no idea what the exact difference is unfortunately. The EL GT used the standard AU one F67Z 9E936 AA $22.70. |
||
| Top | |
||
| TROYMAN |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: hi George, I need a part number and price for a 2001 NU Ghia electric aerial. All the best. Dave Do you actually need the WHOLE aerial? You can buy the mast and rope. The mast and rope is NR 18814 A $109.80, the Aerial assy NR 18813 A $300.80 if its any consolation we used a eb ghia power antanna in our au fairmont, we just had to change the bottom bracket.. |
||
| Top | |
||
| SLO247 |
|
||
|
Aerpro do the mast and rope too. $20 or so I reckon from memory, I've used one before and it was perfect.
|
||
| Top | |
||
| scottus |
|
||
|
hey papa, just wondering how much engine mounts are for an ef falcon got told there $200 each. is this right and is there a cheaper way of fizing them?
|
||
| Top | |
||
| Papa Smurf |
|
||
|
{USERNAME} wrote: hey papa, just wondering how much engine mounts are for an ef falcon got told there $200 each. is this right and is there a cheaper way of fixing them? The originals were round ones but all you can buy now are the rectangular ones and yes they cost $225.00 each. You may need to try a few after market people in your area. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 1 guest |
