|
| blue |
|
|||
|
Papa Smurf wrote: blue wrote: Hey Papa Smurf, I was wondering if you know the part number for the bracket and the rubber that hold the exhaust to the left hand side of the rear end of a BA GT. I have brought a quad exhaust for my BA Fairmont and it will have dual tips coming out of each side, there is nowhere to attach the second half of the exhaust. I know I could make a bracket up myself just wanted to see how much an original would cost. thanks The Twin exhaust bracket is BAFT 5C2258 A $78.00 and the rubber hanger BAF 5F262 C $7.00 Thanks for that, is this all I will need? Or is there another bracket hiding somewhere I can't see that I'll need. |
|||
| Top | |
|||
| Papa Smurf |
|
||
|
blue wrote: Thanks for that, is this all I will need? Or is there another bracket hiding somewhere I can't see that I'll need. As far as I can see that is it. |
||
| Top | |
||
| Papa Smurf |
|
||
|
chickenman_86 wrote: Hey papa Smurf, I have found on my 2005 F6 typhoon that the reverse switch on the gear box has crapped out, its 6 speed manual any idea how much a new one is going to sting me, I cant seem to find any second hand ones over here in NZ. Cheers Dan I think you would be better advised to buy one from someone like EBay. The Genuine Ford one is $260.75 part number 1R3Z 15520 AA. I found a couple of places you can get for under US$50.00. http://www.ebay.com/ctg/Motorcraft-SW58 ... /78933719# US$34.00 http://www.rockauto.com/dbphp/x,carcode ... witch.html US$30.00 |
||
| Top | |
||
| chickenman_86 |
|
||
|
Awesome cheers for that really appreciate it. Saved me some big doleros there!!
_________________ 2005 F6 Typhoon, 6 speed Manual. Stock as a rock |
||
| Top | |
||
| bladez_01 |
|
|||
|
Hi Papa
Looking for availability and price for both a TPS and IAC for an E-Series Windsor. Thanks Nathan |
|||
| Top | |
|||
| lukey1990 |
|
||
|
Hi Papa Smurf, can you please tell me the price and part number for these?
I was chasing the side mould from the rear wheel arch of BA Fairlane's, the ones without the chrome inserts. I plan to use them with by BA wagon so obviously the chrome insert ones won't suit. Cheers
_________________
|
||
| Top | |
||
| Papa Smurf |
|
||
|
bladez_01 wrote: Hi Papa Looking for availability and price for both a TPS and IAC for an E-Series Windsor. Thanks Nathan They are still available, TPS from Ford AUS F4SZ 9B989 AA $185.70 from the US $45.00US. http://stores.channeladvisor.com/Auto-P ... n%20Sensor http://www.amazon.com/Motorcraft-DY871- ... B000C5HJ3Y The Throttle Valve F67Z 9F715 BB $301.90, from the US $100.00US. http://www.ebay.com/itm/F67Z9F715BB-VAL ... 05&vxp=mtr http://www.amazon.com/F67z9f715bb-Valve ... B0042HDG76 |
||
| Top | |
||
| Papa Smurf |
|
||
|
lukey1990 wrote: Hi Papa Smurf, can you please tell me the price and part number for these? I was chasing the side mould from the rear wheel arch of BA Fairlane's, the ones without the chrome inserts. I plan to use them with by BA wagon so obviously the chrome insert ones won't suit. Cheers Well, it's a pity you couldn't use the later ones with the insert as they are cheap. The ones you want are BF F291A34 AP and BF F291A35 AP $142.30 each, almost 3 times more than the later ones. |
||
| Top | |
||
| bladez_01 |
|
|||
|
Papa Smurf wrote: bladez_01 wrote: Hi Papa Looking for availability and price for both a TPS and IAC for an E-Series Windsor. Thanks Nathan They are still available, TPS from Ford AUS F4SZ 9B989 AA $185.70 from the US $45.00US. http://stores.channeladvisor.com/Auto-P ... n%20Sensor http://www.amazon.com/Motorcraft-DY871- ... B000C5HJ3Y The Throttle Valve F67Z 9F715 BB $301.90, from the US $100.00US. http://www.ebay.com/itm/F67Z9F715BB-VAL ... 05&vxp=mtr http://www.amazon.com/F67z9f715bb-Valve ... B0042HDG76 Thank You very much for the prompt response Papa Smurf....Looks like I'll be doing me some shopping in the US of A |
|||
| Top | |
|||
| SWC |
|
||
|
Hi George,
Can you tell me if the steering rack for an EF is the same for 6 and V8 apart from the fact that the V8 one does not have the pressure sensor. I know the mounts will be the same but what about the steering spline and the hose fittings? Thanks in advance. |
||
| Top | |
||
| lukey1990 |
|
||
|
Papa Smurf wrote: lukey1990 wrote: Hi Papa Smurf, can you please tell me the price and part number for these? I was chasing the side mould from the rear wheel arch of BA Fairlane's, the ones without the chrome inserts. I plan to use them with by BA wagon so obviously the chrome insert ones won't suit. Cheers Well, it's a pity you couldn't use the later ones with the insert as they are cheap. The ones you want are BF F291A34 AP and BF F291A35 AP $142.30 each, almost 3 times more than the later ones. Cool thanks a lot. I would have thought the ones with the insert to be more expensive... I might chase them up from a wreck sometime.
_________________
|
||
| Top | |
||
| Johnson stroker |
|
|||
|
SWC wrote: Hi George, Can you tell me if the steering rack for an EF is the same for 6 and V8 apart from the fact that the V8 one does not have the pressure sensor. I know the mounts will be the same but what about the steering spline and the hose fittings? Thanks in advance. Yes they are.
_________________
|
|||
| Top | |
|||
| SWC |
|
||
|
Thanks Dave.
|
||
| Top | |
||
| fairmont65 |
|
|||
Age: 59 Posts: 12 Joined: 17th Oct 2011 Ride: ford fairmont au series 2 Location: montmorency |
Gday papa smurf.
I have fitted a new xr6 cam in my series 2 au fairmont with intech motor. The idea is to bring it up to xr 6 hp specs. Could you tell me the part no for an Au series 2 xr 6 hp auto ecu. I believe it starts R1R23 ? Also could you confirm if the xr 6 hp fuel pressure regulator is 270 kpa or 3.5 bar. I already have the cam fitted so its just the ecu and fuel regulator that is the issue. Cheers Damo |
|||
| Top | |
|||
| Papa Smurf |
|
||
|
fairmont65 wrote: Gday papa smurf. I have fitted a new xr6 cam in my series 2 au fairmont with intech motor. The idea is to bring it up to xr 6 hp specs. Could you tell me the part no for an Au series 2 xr 6 hp auto ecu. I believe it starts R1R23 ? Also could you confirm if the xr 6 hp fuel pressure regulator is 270 kpa or 3.5 bar. I already have the cam fitted so its just the ecu and fuel regulator that is the issue. Cheers Damo The regulator is 3.5 bar for the HP and VCT, the 2.7 bar is the standard one. The ECU, R1R23 12A650 VC $1346.00 that is the retail price for it. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 3 guests |
