|
| kickn_it |
|
||
|
Hey papa smurf,
Ive got this part number as the original rear shockers EFTVE-18125-A, are you able to tell me if they are for XR rear sedan or will fit xr rear sedan or not. Cheers Joel
_________________
|
||
| Top | |
||
| Papa Smurf |
|
||
|
{USERNAME} wrote: Hey, Papa Smurf, I just did the transmission extension bush and seal on my NF Fairlane. Can you tell me if I got the bronze aftermarket bush or the crappy standard one? I got part XA7A034APF and the seal BA7S039A. Cheers mate That is the standard Ford one, there was a change in the bush from BA falcon on but all the others use that XA 7A034 APF. The later bush is Bi Metal. |
||
| Top | |
||
| Papa Smurf |
|
||
|
{USERNAME} wrote: Hey papa smurf, Ive got this part number as the original rear shockers EFTVE-18125-A, are you able to tell me if they are for XR rear sedan or will fit xr rear sedan or not. Cheers Joel EFTVE means it's for EF XR. |
||
| Top | |
||
| philaddis |
|
|||
|
Papa Smurf,
Will Ford sell me the door and dash spears for an XR50?? The carbon fibre jobs? Also, can you buy alternate ICC fascia's. ie keep the original ICC, but go to a different colour fascia?? Cheers, Phil
_________________ ED XR8 Spri-mitatio-nt |
|||
| Top | |
|||
| Papa Smurf |
|
||
|
{USERNAME} wrote: Papa Smurf, Will Ford sell me the door and dash spears for an XR50?? The carbon fibre jobs? Also, can you buy alternate ICC fascia's. ie keep the original ICC, but go to a different colour fascia?? Cheers, Phil Yes they will, R/H BG F24184 B1CC and L/H BG F24185 B1CC $125.75 each. As for the fascia, you will need to contact http://www.aslautomedia.com.au/ |
||
| Top | |
||
| 984.OEL |
|
||
|
are all steering and suspension parts available for '95 XG utes and how much? ball joint, tie rod arms; the lot.. do they sell "kits"?
|
||
| Top | |
||
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
can i please have the part number for the XH ute with log manifold belt tensioner?
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| Papa Smurf |
|
||
|
{USERNAME} wrote: are all steering and suspension parts available for '95 XG utes and how much? ball joint, tie rod arms; the lot.. do they sell "kits"? Only things that are still available are the upper and lower ball joints and the pitman arm. Lower ball joints ABJ 10Z $54.50 ea, Upper ball joints ABJ 3Z $39.40 each and the pitman arm XA 3590 Z $95.30. |
||
| Top | |
||
| Papa Smurf |
|
||
|
{USERNAME} wrote: can i please have the part number for the XH ute with log manifold belt tensioner? Part number is EHC 6B209 A $420.95. |
||
| Top | |
||
| 984.OEL |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: are all steering and suspension parts available for '95 XG utes and how much? ball joint, tie rod arms; the lot.. do they sell "kits"? Only things that are still available are the upper and lower ball joints and the pitman arm. Lower ball joints ABJ 10Z $54.50 ea, Upper ball joints ABJ 3Z $39.40 each and the pitman arm XA 3590 Z $95.30. what do you reckon would be best alternative parts....repco? the stuff you see on ebay (tie rod end kits, control arms...)looks ok but should i trust it?? cheers for reply.. |
||
| Top | |
||
| One Drone |
|
|||
|
Hey Papa,
Be looking to get 2 things next few days. Firstly an AU I6 MLS Gasket Secondly I found a 70mm 220kw Tickford throttle body I bought 4 years ago apparently. It is missing the throttle cable bracket, associated nuts n bolts etc. Not sure if we can source this these days? Cheers, Sean.
_________________ There are 10 types of people in this world. |
|||
| Top | |
|||
| Papa Smurf |
|
||
|
{USERNAME} wrote: what do you reckon would be best alternative parts....repco? the stuff you see on ebay (tie rod end kits, control arms...)looks ok but should i trust it?? cheers for reply.. If it is from a Repco outlet should be ok. As long as there is a warranty on the goods there shouldn't be a problem. |
||
| Top | |
||
| Matt_jew |
|
||
|
George can you please shoot me a price and availability for the little black plastic fake vent things in the front bumper of an AU?
Im after a drivers side one. Cheers
_________________ {USERNAME} wrote: More people paid for a ride in a VT commodore then an AU Falcon so the VT is superior.
Based on that fact my Mum is the best around! |
||
| Top | |
||
| twase |
|
|||
|
Can you PM me a picture of the rear of the AWD territory 4 speed transmission extension housing please? Also the Transfer case pic even both together if possible.
_________________ BF Fairmont Ghia Series II update. Last edited by twase on Sun Feb 05, 2012 6:20 pm, edited 1 time in total. |
|||
| Top | |
|||
| fatwombat |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: Hey, Papa Smurf, I just did the transmission extension bush and seal on my NF Fairlane. Can you tell me if I got the bronze aftermarket bush or the crappy standard one? I got part XA7A034APF and the seal BA7S039A. Cheers mate That is the standard Ford one, there was a change in the bush from BA falcon on but all the others use that XA 7A034 APF. The later bush is Bi Metal. Yeah I thought as much. Thanks mate |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 3 guests |
