|
Papa Smurf |
|
||
|
Josh, these are the best I have:
Attachment: Clutch01.jpg Attachment: Clutch02.jpg Attachment: Clutch03.jpg Attachment: Clutch04.jpg Attachment: Clutch05.jpg
|
||
Top | |
bradley4567 |
|
||
|
hey papa smurf you wouldnt be able to get a price on an ef headlight knob?
_________________ ef falcon daily driver |
||
Top | |
Papa Smurf |
|
||
|
bradley4567 wrote: hey papa smurf you wouldn't be able to get a price on an ef headlight knob? Yes, the knob is EF 11666 A is $15.00 and the control disc behind the knob is EF 13K713 A $7.70. |
||
Top | |
RedRoo |
|
|||
Age: 55 Posts: 1883 Joined: 22nd Apr 2005 Ride: 94 ED Fairmont, MY97 LE WRX Location: Seymour |
Mate I am looking for a indicator, horn, high beam combo switch for a 1977 transit van, it sits on the left hand side of the steering colum.
Now what I know is it's a lucas made item and from what i can see via pics most of lucas's combo switches look interchangable. So my question is what can I use to replace the origanal combo switch on my van. Cheers Paul |
|||
Top | |
XR-Lane |
|
|||
|
Cheers George. Just wanted to know if the master cylinder was on the pedal box.
|
|||
Top | |
TerroristGHIA |
|
|||
|
Hey George, me again
Would you be able to get the O ring for the HP line of the PS pump for an ED 6. I have the ED line in the rear of the EF pump and she went pop today, was awful messy and smelly for a little while, I got another o ring for it but is the wrong size, managed to limp it home Cheers Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
Top | |
Papa Smurf |
|
||
|
RedRoo wrote: Mate I am looking for a indicator, horn, high beam combo switch for a 1977 transit van, it sits on the left hand side of the steering colum. Now what I know is it's a lucas made item and from what i can see via pics most of lucas's combo switches look interchangable. So my question is what can I use to replace the origanal combo switch on my van. Cheers Paul Paul, I had a look and as fas as I can ascertain there is nothing that is close to this particular one. It has been obsolete since 2002, sorry mate. |
||
Top | |
Papa Smurf |
|
||
|
WILDEB wrote: hey. Does Ford still sell XH snorkels? i'm a mechanic so roughly what would they be trade price? cheers We have ONE left in stock, would cost you $53.00 plus postage. |
||
Top | |
hans hartman |
|
||
|
hi Papa Smurf,on the ef v8 the top radiator hose and the 2 lower hoses,how much are they and part numbers,thanks-----almost forgot,i need 8 o rings for the power steering rack pipes,as i flushed the rack and used the old ones that look ifffy,thanks
_________________ R.I.P HANS HARTMAN Last edited by hans hartman on Thu Apr 22, 2010 5:53 pm, edited 1 time in total. |
||
Top | |
magna |
|
|||
|
hey papa hows things, if you have time can you please check if the back trim of the front seats are available for a SYII territory? I'm wondering also if the F6X or BFII ghia velour ones are available and if they would fit? thanks again!
|
|||
Top | |
TerroristGHIA |
|
|||
|
Hey george, me again.
This time i am chasing V8 parts( yep i know, could be a big problem). I need the steel hoses and connection for the heater hoses on a 5.0 V8 that go into the manifold. My new manifold doesnt have any. The EB-AU are all the same as far as i can tell. Will also need a a coolant temp sender for said steel hoses. I hope you can still get them Cheers Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
Top | |
Papa Smurf |
|
||
|
hans hartman wrote: hi Papa Smurf,on the ef v8 the top radiator hose and the 2 lower hoses,how much are they and part numbers,thanks-----almost forgot,i need 8 o rings for the power steering rack pipes,as i flushed the rack and used the old ones that look ifffy,thanks The seals for the pipes are 4x EA 50416 A $3.80 each and 4x 380976 S $3.60 each Top EC 8260 B1MC $104.00 Bottom EF 8286 A $24.00 and EF 8286 C $20.45 |
||
Top | |
Papa Smurf |
|
||
|
magna wrote: hey papa hows things, if you have time can you please check if the back trim of the front seats are available for a SYII territory? I'm wondering also if the F6X or BFII Ghia Velour ones are available and if they would fit? thanks again! Yes you can buy the trims but I would need a VIN to identify them properly. They range from about $370.00 to $800.00 each and there are a few. The seats in Territory's are different to the Falcon seats so, you won't be able to use them. Territory's have Cloth, suede cloth and leather, there is no listing for Velour, sorry. |
||
Top | |
Papa Smurf |
|
||
|
TerroristGHIA wrote: Hey George, me again. This time i am chasing V8 parts( yep i know, could be a big problem). I need the steel hoses and connection for the heater hoses on a 5.0 V8 that go into the manifold. My new manifold doesn't have any. The EB-AU are all the same as far as i can tell. Will also need a a coolant temp sender for said steel hoses. I hope you can still get them Cheers Brett The Coolant sensor is 3F1Z 12A648 A $100.00, there are 2 of them listed for the car. The hose manifold is F8RE 9D424 AA $133.00. Attachment: Manifold.JPG
|
||
Top | |
magna |
|
|||
|
Papa Smurf wrote: magna wrote: hey papa hows things, if you have time can you please check if the back trim of the front seats are available for a SYII territory? I'm wondering also if the F6X or BFII Ghia Velour ones are available and if they would fit? thanks again! Yes you can buy the trims but I would need a VIN to identify them properly. They range from about $370.00 to $800.00 each and there are a few. The seats in Territory's are different to the Falcon seats so, you won't be able to use them. Territory's have Cloth, suede cloth and leather, there is no listing for Velour, sorry. thanks again papa for taking the time to look up the parts, im after the backing piece that the map pocket attaches to. its not the seat facing, its cliped in and held in with 2 screws. i checked out the F6X at ftg auto salvage and it had it in velour/suade |
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 5 guests |