|
| Papa Smurf |
|
||
|
BEAR80 wrote: hey papa smurf thanx for the info where abouts is the one in stock you mentioned? cheers bear At Thomson Ford Parramatta, where I work 
|
||
| Top | |
||
| Papa Smurf |
|
||
|
eb_dean wrote: yes u meant with pistons, should've stated that for you! thanks Well, I can tell you that the Gasket sets from Ford are $498.00. I am sure that you can buy after market engine rebuild kits elsewhere that will be MUCH cheaper. You could more than likely pick up a good second hand motor for about $400.00. Sorry I can't help further. |
||
| Top | |
||
| CPOCSM |
|
|||
|
Gday there - would a A/C compressor from a 1995 NL Fairlaine V8 fit a 1991 EB1 XR8?
Mine is just about choofed...need air! |
|||
| Top | |
|||
| Papa Smurf |
|
||
|
CPOCSM wrote: Gday there - would a A/C compressor from a 1995 NL Fairlaine V8 fit a 1991 EB1 XR8? Mine is just about choofed...need air! From 1993 onwards, the V8 ED/EF/EL uses the same compressor, the earlier ones are different. More than likely the difference is fittings for the A/C hoses. Unfortunately we don't carry the compressor and I cannot find any info on the sizes or anything. |
||
| Top | |
||
| XR-Lane |
|
|||
|
Are you using fordmods while at work George?
|
|||
| Top | |
|||
| Papa Smurf |
|
||
|
XR-Lane wrote: Are you using fordmods while at work George? Yea, naughty me 
|
||
| Top | |
||
| XR-Lane |
|
|||
|
Bloody good to see your commitment
|
|||
| Top | |
|||
| BEAR80 |
|
|||
Age: 44 Posts: 683 Joined: 4th Mar 2010 Ride: BF Fairmont Ghia & TS Magna Location: central coast |
Papa Smurf wrote: BEAR80 wrote: hey papa smurf thanx for the info where abouts is the one in stock you mentioned? cheers bear At Thomson Ford Parramatta, where I work hey papa smurf once again thanx for the info but parramatta is a bit too far to drive just for one part cheers bear |
|||
| Top | |
|||
| Papa Smurf |
|
||
|
BEAR80 wrote: once again thanx for the info but parramatta is a bit too far to drive just for one part cheers bear Where do you live? My mate CamFord is going to Newwy this weekdn, you could pick up from him? |
||
| Top | |
||
| SLO247 |
|
||
|
I don't suppose Ford do individual parts for the EF/L Instrument clusters? I need a Smartlock Jewel. Funny LED thing that makes the smartlock light flash.
|
||
| Top | |
||
| Papa Smurf |
|
||
|
SLO247 wrote: I don't suppose Ford do individual parts for the EF/L Instrument clusters? I need a Smartlock Jewel. Funny LED thing that makes the smartlock light flash. Sorry mate, they do not. 
|
||
| Top | |
||
| SLO247 |
|
||
|
Thanks very much though.
|
||
| Top | |
||
| StrawbZ |
|
|||
|
Hey Papa Smurf,
i am after the price of a AU XR6 LHS brackets as my brackets have broken after a little prang also i am after the left indicator at the bottom left of the front bar of the XR Thanks StrawbZ Last edited by StrawbZ on Sun May 02, 2010 6:40 pm, edited 1 time in total. |
|||
| Top | |
|||
| Mr220kw |
|
|||
|
G'day Papa Smurf
Can you tell me what type of oil seals are on the timing cover where the idler bolts go through? Are these available aftermarket or only from Ford? Also do yo have an exploded view or the parts? Cheers Mr220kw |
|||
| Top | |
|||
| onlinejamez |
|
||
|
hi papa LOL
got told to try you on this one from a question i asked in brakes and driveline ford territory rear shockers have buggered top rubbers, are they easy to replace, they look simple, maybe pressed in, does anyone know what the rubbers are worth and what new shockers are worth i also have a exhaust leak somewhere in between the cat and the o gasket to the inlet manifold its covered with heat shield, is there a clamp under it?? double thanks |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 2 guests |
