|
| alfy |
|
|||
|
hi george, ive got an interesting one for you.
can you still get EF/L Wagon sill panels new?
_________________ 2021 V6 Manual Amarok - 245kw/750nm - many goodies |
|||
| Top | |
|||
| Papa Smurf |
|
||
|
StrawbZ wrote: Hey Papa Smurf, i am after the price of a AU XR6 LHS brackets as my brackets have broken after a little prang  also i am after the left indicator at the bottom left of the front bar of the XR Thanks StrawbZ The indicator lamp is $66.10 part number ERTVE 13369 A. Which brackets are you after? The ones from the bar to the guard? or the shield under the headlight? |
||
| Top | |
||
| Papa Smurf |
|
||
|
Mr220kw wrote: G'day Papa Smurf Can you tell me what type of oil seals are on the timing cover where the idler bolts go through? Are these available aftermarket or only from Ford? Also do yo have an exploded view or the parts? Cheers Mr220kw Is this a 6cyl you are referring to? if so, there are none. Let me know and I will try to get a pic for you. |
||
| Top | |
||
| Papa Smurf |
|
||
|
onlinejamez wrote: hi papa LOL got told to try you on this one from a question i asked in brakes and driveline ford territory rear shockers have buggered top rubbers, are they easy to replace, they look simple, maybe pressed in, does anyone know what the rubbers are worth and what new shockers are worth i also have a exhaust leak somewhere in between the cat and the o gasket to the inlet manifold its covered with heat shield, is there a clamp under it?? double thanks You CAN buy the bushes for the top of the shocker. They are part number SX 18198 A $100.00 each x2, there are a few different shocks for the read, starting at $231.00 each all the way up to $385.00 each, it depends on your VIN (Vehicle Identification Number). There is a service fix for the front of the Cat/Engine pipe from 2006 model to 2008, Part number 8R7Z 5E228 AA $127.00, it needs to be WELDED in. |
||
| Top | |
||
| Papa Smurf |
|
||
|
alfy wrote: hi George, I've got an interesting one for you. can you still get EF/L Wagon sill panels new? Unfortunately, no. You can't even buy for AU and for the BA, they never serviced them. |
||
| Top | |
||
| alfy |
|
|||
|
Papa Smurf wrote: alfy wrote: hi George, I've got an interesting one for you. can you still get EF/L Wagon sill panels new? Unfortunately, no. You can't even buy for AU and for the BA, they never serviced them. thats fair enough, i knew it was probably impossible but didnt hurt to ask. looks like il need to find 2nd hand ones then. thanks anyway, keep up the good work George 
_________________ 2021 V6 Manual Amarok - 245kw/750nm - many goodies |
|||
| Top | |
|||
| TimmyA |
|
|||
|
Hi George,
Can you tell me the difference between an EF/EL - AU - BA clock spring, if there is any difference (physically and how many wires in each)... And if you have any pics, do you think a BA clock spring would clip onto the EL combo switch... Also I remember you saying once you were going to look into the company who made the door moulds for ED's for ford with the chrome strip... Did you ever have a win with this? Cheers mate, Tim
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| Papa Smurf |
|
||
|
timmytimtim wrote: Hi George, Can you tell me the difference between an EF/EL - AU - BA clock spring, if there is any difference (physically and how many wires in each)... And if you have any pics, do you think a BA clock spring would clip onto the EL combo switch... Also I remember you saying once you were going to look into the company who made the door moulds for ED's for ford with the chrome strip... Did you ever have a win with this? Cheers mate, Tim As to the Clock Spring, I will check out tomorrow at work but never got any further with the Moulds. Ford is slack in that department. Most of the guys who work in the Parts section were either filling their nappies or going to school when EA/EB's were new. No offense intended
|
||
| Top | |
||
| TimmyA |
|
|||
|
Cheers George that'd be great...
Yeah shame about those moulds... The old man found a place somewhere who claim they can chrome anything... So one day when he has some spare doe he is gonna send off a spare insert and see how it works out... Cheers, Tim
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| Mr220kw |
|
|||
|
Papa Smurf wrote: Mr220kw wrote: G'day Papa Smurf Can you tell me what type of oil seals are on the timing cover where the idler bolts go through? Are these available aftermarket or only from Ford? Also do yo have an exploded view or the parts? Cheers Mr220kw Is this a 6cyl you are referring to? if so, there are none. Let me know and I will try to get a pic for you. G'day Thanks for the reply. Should have said that the engine is a Au Vct and the seal is behind the extra pulley in the middle. There looks to be some kind of press in seal. It has a split in the metal case to allow it to be pressed in. Aparently I've read when the pulley is replaced the seal has to be changed as well. Cheers Mr220kw |
|||
| Top | |
|||
| TimmyA |
|
|||
|
Also George,
Availability on the alternator bracket? Plus price? ED-10145-A To suit ED... This is the one the teeth wear off when you try to undo the wrong nut 
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| TerroristGHIA |
|
|||
|
timmytimtim wrote: Also George, Availability on the alternator bracket? Plus price? ED-10145-A To suit ED... This is the one the teeth wear off when you try to undo the wrong nut I have an Alt bracket for an ED if you want. Needs a good clean. PM me for price Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| TimmyA |
|
|||
|
still has the teeth?
There is one on ebay for 25 bucks brand new atm... So just curious whether they are still available new or its old stock from somewhere...
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| blackmyst |
|
|||
|
Well I'm back Papa Smurf
and I'm in need of a price and a part number if poss for a rear tail light / right hand side BA Wagon. I've just rang the local Ford suppliers which quoted me $285... surely this can't be right. (fingers crossed) it could be because i'm still stuck on this island  TIA Ebz xxx |
|||
| Top | |
|||
| blackmyst |
|
|||
|
Thanks Ash
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 2 guests |
