|
| Papa Smurf |
|
||
|
TerroristGHIA wrote: Yes mate, EFI 5.0 and EFI 5.8. I would assume the Aussie delivered 5.8 F trucks from the early 90's would be where to look. (paddy wagons and ambo's from that era). The XD was a cleveland, not a Windsor. Cheers Brett ALL XW/XY Windsor and Clevland use the SAME plate for the back of the motor. I know they are 351s but that's about all I can get for you, sorry. |
||
| Top | |
||
| CPOCSM |
|
|||
|
ashcook wrote: I think the help you offer to members on this site makes you a great asset. I know personally how much you do go out of your way to help as you have for me on many occasions. I hope that others appreciate what you do, just as much as I do. I know at times just because you work on the other side of the counter, people can think you owe them everything. When in fact you could be as much as a robot as the computer you use. The help you offer is your choice, not your obligation. I think that this can be blurred in many peoples eyes as I too have done your job. You have my respect George. Your good at your job and a good mate to have!  +1 there I read the posts here and have managed to fix a lot of the issues I have come up against. Will keep looking with enthusiasm. 
|
|||
| Top | |
|||
| TerroristGHIA |
|
|||
|
+1 for Ash's comment,
And thanks George, I appreciate the help. It seems that the 5.0 is the same as the 5.8 so all good, Was just covering all bases to make sure i didn't run into any issues come install time. Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| Matt_jew |
|
||
|
I mirror the other guys comments.
There would be more then one of us in deep s**t if it wasnt for your assistance George.
_________________ xr6turnip wrote: More people paid for a ride in a VT commodore then an AU Falcon so the VT is superior.
Based on that fact my Mum is the best around! |
||
| Top | |
||
| ToranaGuy |
|
|||
|
HI Papa Smurf!
I'd love to ask you if you can provide me with the part number for the bolt & shim that holds the clutch fork into the bell housing, for both of the following cars: Eb I6 5speed Eb V8 5speed. I have been told by ford @ hoppers crossing that they are no longer available, but other's tell me otherwise, but can't provide part numbers. I too now work in the spare parts game (for Repco), and would love to thank you for this thread & your efforts for fordmods members! Cheers ToranaGuy
_________________ I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|FS [VIC]: Wrecking - Eb XR8 - Parts available |Build Thread|Ebay Items - Ford Parts| |
|||
| Top | |
|||
| fairlane6970 |
|
|||
|
Vote no1 Papa Smurf for PM! your help is invaluable!
_________________
|
|||
| Top | |
|||
| TROYMAN |
|
||
|
yea!!! vote papa smurf for pm..
 
|
||
| Top | |
||
| ToranaGuy |
|
|||
|
fairlane6970 wrote: Vote no1 Papa Smurf for PM! your help is invaluable! I know i shouldn't spammin like this, but i too will go: +1 Papa Smurf for pm! Cheers ToranaGuy
_________________ I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|FS [VIC]: Wrecking - Eb XR8 - Parts available |Build Thread|Ebay Items - Ford Parts| |
|||
| Top | |
|||
| Papa Smurf |
|
||
|
ToranaGuy wrote: I'd love to ask you if you can provide me with the part number for the bolt & shim that holds the clutch fork into the bell housing, for both of the following cars: Eb I6 5speed Eb V8 5speed. I have been told by ford @ hoppers crossing that they are no longer available, but others tell me otherwise, but can't provide part numbers. I too now work in the spare parts game (for Repco), and would love to thank you for this thread & your efforts for Fordmods members! Cheers ToranaGuy The bolt for the 6cyl is still available and is V 800090 S2 $33.40 and the V8 is D5FZ 7B602 A $75.40. The spacer for the AU is available and I guess you could make it fit, the bolt for the AU is the same? The Spacer is AU2 7B554 A $5.40. As to the V8 spacer, there is no spacer listed for them. Maybe you could find out from a Mustang site as they are the same Bolt for the 2000 model. |
||
| Top | |
||
| ToranaGuy |
|
|||
|
Papa Smurf wrote: ToranaGuy wrote: I'd love to ask you if you can provide me with the part number for the bolt & shim that holds the clutch fork into the bell housing, for both of the following cars: Eb I6 5speed Eb V8 5speed. I have been told by ford @ hoppers crossing that they are no longer available, but others tell me otherwise, but can't provide part numbers. I too now work in the spare parts game (for Repco), and would love to thank you for this thread & your efforts for Fordmods members! Cheers ToranaGuy The bolt for the 6cyl is still available and is V 800090 S2 $33.40 and the V8 is D5FZ 7B602 A $75.40. The spacer for the AU is available and I guess you could make it fit, the bolt for the AU is the same? The Spacer is AU2 7B554 A $5.40. As to the V8 spacer, there is no spacer listed for them. Maybe you could find out from a Mustang site as they are the same Bolt for the 2000 model. Thanks for the info Papa Smurf! I will be going to ford & ordering a spacer tomorrow. I didn't realize the v8 doesn't list a spacer. I have not yet had my v8 clutch fork out, but assumed (I know, never assume!) that it would probably be the same setup as the I6 T5. Cheers ToranaGuy
_________________ I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|FS [VIC]: Wrecking - Eb XR8 - Parts available |Build Thread|Ebay Items - Ford Parts| |
|||
| Top | |
|||
| phatba |
|
||
|
hi george. going to try fitting a ba/bf towbar to the fg. looking to buy one secondhand, is there differences between ba/bf ones depending on the car they come from? like is a wagon one different from a ute, which is different from a sedan? my fg is a sedan so thinking a ba/bf sedan suited towbar would be my best bet if they are different.
cheers mate |
||
| Top | |
||
| Papa Smurf |
|
||
|
phatba wrote: hi george. going to try fitting a ba/bf towbar to the fg. looking to buy one secondhand, is there differences between ba/bf ones depending on the car they come from? like is a wagon one different from a ute, which is different from a sedan? my fg is a sedan so thinking a ba/bf sedan suited towbar would be my best bet if they are different. cheers mate I can see where you could get away with fitting a BA/BF towbar to the FG sedan only. Wagons and Utes are way different to sedans. |
||
| Top | |
||
| Johnson stroker |
|
|||
|
Papa Smurf wrote: dc_todd wrote: Papa, can you please advise a P/N for 24lb blue tops, for a V8. I think its M-9593-AA302. is this correct? Dave The number is mostly correct, M-9593-A302. The injectors are FORD Racing parts and we are not allowed to sell this stuff, there is a Ford racing distributor here, Rare Spares, who can buy but not us. I found this place that may be able to help you. http://www.hume.com.au/product_info.php ... d016cf4f85  Thanks George, Turns out the injectors i picked up are not suited to AU, didn't realise AU ran a different plug to everything else. bastards, any chance you can provide a part number for a AU injector? Gotta exchange these now. dave
_________________
|
|||
| Top | |
|||
| Papa Smurf |
|
||
|
There are 2 Injectors listed for AU, one with a Blue ID XS2Z 9F593 BA $66.00 ea and Orange ID
XL2Z 9F593 CA $242.20 ea.  EB/ED/EF/EL use Mustang ones F1ZZ 9F593 C $577.00 ea The XL2Z 9F593 CA (Motorcraft CM4936, Bosch 0-280-155-917) are listed for use on 4.6 V8 Lincolns.   The XS2Z 9F593 BA (Motorcraft CM4960) Attachment: image.jpg It appears that you can buy an adaptor kit for injectors that have the wrong electrical fitting, http://www.fordracingparts.com/parts/part_details.asp?PartKeyField=9669 Attachment: M-14464-A8.jpg
|
||
| Top | |
||
| Johnson stroker |
|
|||
|
George as always, your info is awesome.
I'll try and get either exchance on the ones I have or refund and get the correct ones.
_________________
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 5 guests |
