|
| snap0964 |
|
|||
|
Recently I've seen manual pedalboxes go for some ridiculous prices (particularly EF/EL ones), so armed with a bit of knowledge, and some basic welding skills, and possibly less than $50 in parts (provided you shop around), you should be able to turn out one yourself.
The design I describe, has now done around 5000 kms, and works well. Modding an auto pedalbox isn't a new idea, but you might find the strength aspects better than the 'factory' design. http://members.dodo.com.au/~algis/index6.htm
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| stockstandard |
|
|||
|
Not a bad idea.
I was looking over a an x-series auto pedal box the other week. I have an EA clutch pedal and it looks like all you would need is a large bolt, a metal plate to spread the load and a few welds to hold it together. When I was mocking it up it was looking like a hobo version of a mal wood clutch pin. Havent fitted it together yet though so not sure it works, but if it does it is a very easy way to do it.
_________________ Stoke me a clipper, I'll be back for Christmas |
|||
| Top | |
|||
| Waggin |
|
|||
|
Nice! Can we publish this as a Fordmods Doco ?
_________________ WAG363: AUII LTD Supercharged 363 Dart Stroker [Supercharged 363 LTD Build] |
|||
| Top | |
|||
| snap0964 |
|
|||
|
stockstandard wrote: I was looking over a an x-series auto pedal box the other week. I have an EA clutch pedal and it looks like all you would need is a large bolt, a metal plate to spread the load and a few welds to hold it together. When I was mocking it up it was looking like a hobo version of a mal wood clutch pin. Mark, is there much difference between an XF clutch pedal and an E series one??I can't say I've ever seen any clutch pedal part numbers - if it was 87DA-xxx it would mean EA onwards, but if it was 86DA and earlier, they're probably the same. I've only XH experience, and the pedalbox is an EF/EL unit. Waggin wrote: Nice! Can we publish this as a Fordmods Doco ? Of course Brad. I don't think Greg has published http://members.dodo.com.au/~algis/index5.htm either.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| Happy |
|
|||
|
snap0964 wrote: stockstandard wrote: I was looking over a an x-series auto pedal box the other week. I have an EA clutch pedal and it looks like all you would need is a large bolt, a metal plate to spread the load and a few welds to hold it together. When I was mocking it up it was looking like a hobo version of a mal wood clutch pin. Mark, is there much difference between an XF clutch pedal and an E series one??I can't say I've ever seen any clutch pedal part numbers - if it was 87DA-xxx it would mean EA onwards, but if it was 86DA and earlier, they're probably the same. I've only XH experience, and the pedalbox is an EF/EL unit. Waggin wrote: Nice! Can we publish this as a Fordmods Doco ? Of course Brad. I don't think Greg has published http://members.dodo.com.au/~algis/index5.htm either.just done this one .. now with Waggin to upload! Will get to the other one soonish!
_________________ Owning 1 of 67612 EF GLi Sedans made
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 14 guests |
