Fordmods Logo

EF/L Cluster swap question 

 

Page 1 of 1 [ 10 posts ] 

 
 Post subject: EF/L Cluster swap question
Posted: Sun Aug 12, 2007 1:58 am 
Technical Contributor
Offline
User avatar

Age: 39

Posts: 2516

Joined: 7th Nov 2004

Gallery: 4 images

Ride: LS3 VF

Location: Bunbury
WA, Australia

just a quick one
if i install a high series BEM at the same time as the cluster, will i still need to add that diode/resister so the lcd's illuminate?
Top
 Profile  
 
 
Posted: Sun Aug 12, 2007 10:20 am 
Getting Side Ways
Offline
User avatar

Posts: 2644

Joined: 6th Nov 2004

Gallery: 8 images

Ride: 2007

Location: Mount Annan
NSW, Australia

No but you will need to change the headlamp switch and maybe the wiper stalk depending on your model - your profile suggest a futura so the stalk will be OK.

 

_________________

BF Fairmont Ghia Series II update.
GQ XR6T ghia patrol.

,======o00o
//__|__|_,\_____\,___
|_/--\'_|'__|_/--\_[]IIII[]
_( o ) )_____( o ) )=o=) )__

Top
 Profile  
 
 
Posted: Sun Aug 12, 2007 11:54 am 
Technical Contributor
Offline
User avatar

Age: 45

Posts: 4093

Joined: 20th Mar 2005

Gallery: 2 images

Ride: 2.0 Turbo VW

Power: 142 rwkw

Location: Seaford State:
VIC, Australia

as he said, however you add the resistor when adding a fairmont cluster to a gli/futura/xr.
remove when going low spec cluster to higher series dash loom.

 

_________________

Carefree, we may not be number one, but we're up there.

Top
 Profile  
 
 
Posted: Sun Aug 12, 2007 10:08 pm 
Technical Contributor
Offline
User avatar

Age: 60

Posts: 5659

Joined: 14th Jan 2005

Gallery: 10 images

Ride: 96 XH/97 EL

Location: South Coast
NSW, Australia

twason wrote:
No but you will need to change the headlamp switch
Any E series equivalent fairmont/ghia/LTD/Fairlane headlamp switch will suit for the replacement. Check for the green connector on the back of the switch body - gli/futura ones are a beige colour.
Also the wiring from the switch to the BEM needs to be modified, or changed.

 

_________________

96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl
97 EL Futura S/W: LPG, Alarm, LED int Lts, Trip Comp, F/Lane Dome Lt, Climate Ctrl, T5 Conversion

Top
 Profile  
 
 
Posted: Tue Sep 04, 2007 11:21 pm 
Technical Contributor
Offline
User avatar

Age: 39

Posts: 2516

Joined: 7th Nov 2004

Gallery: 4 images

Ride: LS3 VF

Location: Bunbury
WA, Australia

is a high series bem a straight swap to gain things such as fade in and out on interior lamps?
Top
 Profile  
 
 
Posted: Tue Sep 04, 2007 11:37 pm 
Stock as a Rock
Offline

Posts: 189

Joined: 5th Mar 2007

Ride: 94 Futura

Location: Midland
WA, Australia

Fade should happen with the Futura BEM
Top
 Profile  
 
 
Posted: Tue Sep 04, 2007 11:39 pm 
Technical Contributor
Offline
User avatar

Age: 45

Posts: 4093

Joined: 20th Mar 2005

Gallery: 2 images

Ride: 2.0 Turbo VW

Power: 142 rwkw

Location: Seaford State:
VIC, Australia

xpression wrote:
is a high series bem a straight swap to gain things such as fade in and out on interior lamps?


High series requires wire mods and a fair bit of stuffing around,
A Mid series gives you Light fade, intermittent wipers, also time delay on window circuit. and is a direct plug in (ef-ef or el-el)

http://www.fordmods.com/forums/documents.php?doc=49

 

_________________

Carefree, we may not be number one, but we're up there.

Top
 Profile  
 
 
Posted: Wed Sep 05, 2007 12:57 am 
Technical Contributor
Offline
User avatar

Age: 39

Posts: 2516

Joined: 7th Nov 2004

Gallery: 4 images

Ride: LS3 VF

Location: Bunbury
WA, Australia

maybe it does, i havent actually checked, altho i do have intermitant wipers and also time delay on power windows.
Does any EL bem make the lights come on when key is turned off?
Top
 Profile  
 
 
Posted: Thu Sep 13, 2007 10:15 pm 
Getting Side Ways
Offline
User avatar

Age: 44

Posts: 1339

Joined: 7th Nov 2004

Gallery: 3 images

Ride: FGX G6ET

Location: Worrigee
NSW, Australia

lights on when key is turned off...no E-series does this as far as I'm aware.

I upgraded my BEM in the XR6 with a high series one doing the climate control conversion. It was easier to just replace the dash loom with a high series one, then everything is just plug and play.
Top
 Profile  
 
 
Posted: Fri Sep 14, 2007 9:43 pm 
Technical Contributor
Offline
User avatar

Age: 39

Posts: 2516

Joined: 7th Nov 2004

Gallery: 4 images

Ride: LS3 VF

Location: Bunbury
WA, Australia

not so important now, i just got a promotion with a company car
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 10 posts ] 

Who is online

Users browsing this forum: No registered users and 20 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Nov 22, 2024 2:10 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names