Hello People im looking at getting a trip computer for me 92 eb2 i was read that if i was to get one i would need one with the wireing...i havnt got one yet but was curious so i pulled the pannel out where the trip would sit and noticed that there was a pluged attatched to the back of it and a second larger plug just inside the cavity would this be the plug for the trip computer on plug has 4 wires colours are black, green-red stripe, green-yellow stripe, purple-white stripe the bigger plug has 5 wires black, brown, green-white stripe, gray-blue stripe, blue-red stripe back further there is are a few more wires that go somewhere else black, white, brown blue-red-stripe. i also noticed another single brown wire just sitting there back a bit on the same loom.

im sorry if nothing im saying makes much sense so ill add pics and you might be able to tell just by looking at them

thankyou

and i do apologise if i have put this into the wrong forum im new to the site thanks again.

From what i can see you have plugs which are for 2 diff accessories, the one attached to the face plate is for a clock(a clock only not trip computer) and the other believe it or not im sure is the connection for the rear windscreen wiper switch for a station wagon which locates itself where your lpg switch is, i believe they used the same wiring harness for sedan and wagons. Follow this doco and you should be right documents.php?d=82

ahhh ok then no worries ill give that a go thankyou