|
| Shifteh |
|
||
|
Thinking about making a complete Ef rebuild tech doc
would anynbody be interested in me writing one up , when i rebuild my ef?
_________________ Crank Assembly balanced, HV oil pump, ACL Trimetal bearings, "1 extra oil clearance taking to around 0.0650-0.0700 on mains and big ends, Moly rings,, Xr6 Cam, POD ( Possibly oversize injectors), Block, Head, Timing cover, belt idler, Alternator,painted in ford light blue |
||
| Top | |
||
| facer01 |
|
||
Age: 31 Posts: 284 Joined: 27th Sep 2009 Ride: 1995 EF Ford Fairmont Location: Bundaberg, QLD |
go for it would make an interesting read! and im sure alot of people who are interested in doing the same thing would find it interesting.
make sure u take LOTS of pictures though |
||
| Top | |
||
| Shifteh |
|
||
|
i was thinking more along the lines of pics and video, detailing each step
_________________ Crank Assembly balanced, HV oil pump, ACL Trimetal bearings, "1 extra oil clearance taking to around 0.0650-0.0700 on mains and big ends, Moly rings,, Xr6 Cam, POD ( Possibly oversize injectors), Block, Head, Timing cover, belt idler, Alternator,painted in ford light blue |
||
| Top | |
||
| jrloz |
|
||
|
that would be awesome.
|
||
| Top | |
||
| splosh123 |
|
||
Age: 34 Posts: 168 Joined: 3rd Dec 2009 Ride: Falcon EL Option 20 Location: Redcliffe, Brisbane |
Yeah i'm keen for it. can also be applied to other cars aswell... Most cars have the same general jist to them.
|
||
| Top | |
||
| lukey1990 |
|
||
|
Hey Chris, one problem, (unless you re-install the stuff) all the manifolds, ancillaries, cam and head are already off..
If people need a tech doco to assist them during the rebuild them more people will probably need to have how to disassemble the top-end of the engine included too. Just a thought..
_________________
|
||
| Top | |
||
| Shifteh |
|
||
|
well atm it will be full engine rebuild tech doco
will be a good a few weeks before i have the parts
_________________ Crank Assembly balanced, HV oil pump, ACL Trimetal bearings, "1 extra oil clearance taking to around 0.0650-0.0700 on mains and big ends, Moly rings,, Xr6 Cam, POD ( Possibly oversize injectors), Block, Head, Timing cover, belt idler, Alternator,painted in ford light blue |
||
| Top | |
||
| Low_EFII |
|
|||
|
I'd like to read that.
|
|||
| Top | |
|||
| lukey1990 |
|
||
|
uniacidz wrote: Title should be EF Complete Rebuild In 10 Days What about the people who want to do it in 9 days? 
_________________
|
||
| Top | |
||
| phongus |
|
|||
|
uniacidz wrote: Title should be EF Complete Rebuild In 10 Days I'm sure that's possible if you have everything there to put back together...however would you say in 10 days straight, or 10 days in man hours... eg. 1 hour a day for 240 days, 2 hours a day for 120 days etc.
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| krisisdog |
|
|||
|
What exactly does 'complete' entail?
|
|||
| Top | |
|||
| Johnson stroker |
|
|||
|
krisisdog wrote: What exactly does 'complete' entail? My understanding would be from when you pick up the first tool, to finally turning the key at the end. Do a Steven King version. Just not an Its special! haha.
_________________
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 2 guests |
