|
| efnick_v8 |
|
||
|
ey mate...
im about to do a inlet manifold conversion to my eb series 2...... im currently wrecking a ef fairmont so i can use most of the parts out of that.... im tryin the sort out a el ecu which is no problems.... but im still not 100% on what wires i need to extend or make extra wiring 4.... could u please speciffy wat i need to do.... is it as simple as plug in and play or is it more difficult.... ne help is apprecitated thanks nick |
||
| Top | |
||
| efnick_v8 |
|
||
|
ey mate...
im about to do a inlet manifold conversion to my eb series 2...... im currently wrecking a ef fairmont so i can use most of the parts out of that.... im tryin the sort out a el ecu which is no problems.... but im still not 100% on what wires i need to extend or make extra wiring 4.... could u please speciffy wat i need to do.... is it as simple as plug in and play or is it more difficult.... ne help is apprecitated thanks nick |
||
| Top | |
||
| TROYMAN |
|
||
|
hi
the easiest way is to use the eb loom (mark what wires go where) and what you do is put the eb loom onto the ef/el manifold connect the injectors up the same as they were on the eb one .. and the wires that went to the eb throttle body are. the tps and isc ..now you have to run them from the front of the loom to the centre of the loom and up to the ef throttle body by extending them.. you can use the tps and isc from the eb manifold if you want.. but some have different plugs but the wire colours should be the same.. and every thing else will connect the same as the eb ones.. and the el ecu will plug straight into the eb loom.. but ef has a different plug... also you will have to run some new wires to your ecu for the bbm switch.. most of its explaned in the first post.. but if you have any probs or questions just let me know... |
||
| Top | |
||
| SlickNCGhia |
|
|||
|
nice. i wish this was around b4 i started mine. ps looks really neat in the engine bay.
I really need to paint my rocker cover.
_________________ NC Fairlane Ghia. AU engine. Pacemaker 4499. 2.5" Redback Zorst, tints, red dash. 17in ba xr (e-series). Suzuki Across (suzi) Sexy in Black |
|||
| Top | |
|||
| TROYMAN |
|
||
|
that was one of the first thimgs i did lol
|
||
| Top | |
||
| efnick_v8 |
|
||
|
hey man.....
sorry to be a pain but ive been speaking to some ppl and they have said with the el ecu i will have a rough idel and sh** did u have that problem... and i forgot to ask last time.... coz my eb is a ghia its got crusie control and i dnt wanna lose it.... so wats my best option for the cruise situation... dnt 4get im wrecking a ef fairmont so most parts i will have..... thanks nic |
||
| Top | |
||
| TROYMAN |
|
||
|
{USERNAME} wrote: hey man.....
sorry to be a pain but ive been speaking to some ppl and they have said with the el ecu i will have a rough idel and sh** did u have that problem... and i forgot to ask last time.... coz my eb is a ghia its got crusie control and i dnt wanna lose it.... so wats my best option for the cruise situation... dnt 4get im wrecking a ef fairmont so most parts i will have..... thanks nic hi i have no problems with the idle being rough.. if your using a auto ecu in a manual you will have to fit 2 resistors to trick the ecu.. but otherwise i have had no problems with idle..the isc is working ok and it idles good... as for the cruise controle i think you would have to change the set up on the engine to the ef/el set up otherwise the rest should be ok.... but im not 100% on the cruise controle.. |
||
| Top | |
||
| lukey39 |
|
||
|
Just a question about your EL air box what did you do with the charcoal cansister and hoses?I was thinking about going from pod back to panel and better cold air.By the way good effort.
|
||
| Top | |
||
| TROYMAN |
|
||
|
hi
at first the hoses were slightly squashed by the air box but i ended up drilled 2 holes a little lower and used a couple gromits and fed the hoses through .. |
||
| Top | |
||
| lukey39 |
|
||
|
I'l give that ago thanks.
|
||
| Top | |
||
| TROYMAN |
|
||
|
hi
this has just been updated with more info... just waiting to see if it will become a tech doco?? |
||
| Top | |
||
| Waggin |
|
|||
|
This is now a tech doco.. thread locked
If anyone needs to discuss the technical aspect of this doco, please do it in the 6cyl forum. Cheers!
_________________ WAG363: AUII LTD Supercharged 363 Dart Stroker [{DESCRIPTION}] |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 5 guests |
