Hi everyone, I did some searching but cant find any tips on swapping my 5 speed manual to an Auto transmission.
my clutch pedal is on the way out and ford want $625 for pedal assembly.
so weighing up whether I should just put an auto in.

what would I have to change? computer or wiring?

any help would be appreciated
cheers
Robert

the pedal assembly can be repaired or replaced with another unit [auto] which will be cheap. can also buy a replacement pedal pin. don't know if the EA to EL are the same as the AU, but here's a link for the EA/EL

{DESCRIPTION}

if it's the same as the AU .. grab a cheap auto one & fit pin etc etc

oh & change computer, not sure about wiring loom to gearbox & i believe tailshaft

Hi Robert

You can get yourself a second hand AU manual pedal box on ebay for $170.

{DESCRIPTION}

Its not a massive task to replace, just need to disconnect the brake assembly (remember how you took it off so you can return it the same way), undo the 10mm bolt and pin from the steering column and slide up to make room and then the (from memory) remove the 6 off 13mm bolts holding the pedal box in. It will come out however you may need to wriggle it around and get the right angle.

The other option is to remove your pedal box and repair it.....

Good luck