|
| ReGiE |
|
|||
|
can the LSD diff centres be put into a single spinner 3.08 diff housing? Or is it easier to just change the whole diff?
_________________ Gooooone - Eb2 Coon - 143RWKW |
|||
| Top | |
|||
| Dellboy999 |
|
|||
|
Its not a backyard job to swap centres unless you know 100% what you are doing, if the LSD is good, just swap that in, otherwise get the centre swapped and the LSD refreshed at the same time.
_________________ Full working BA Shifter now upgraded to BF Shifter. |
|||
| Top | |
|||
| data_mine |
|
|||
|
I thought the 3.45 a*** just wouldn't fit in the 3.08 housing?!?
_________________ 1998 DL LTD in Sparkling Burgundy, daily, 302W, stereo, slow |
|||
| Top | |
|||
| Dellboy999 |
|
|||
|
AFIK, they are both 28 spline axles so no problem, the gears are not any bigger, just the ratio of teeth change the gearing.
_________________ Full working BA Shifter now upgraded to BF Shifter. |
|||
| Top | |
|||
| uglybob |
|
|||
|
data_mine wrote: I thought the 3.45 a*** just wouldn't fit in the 3.08 housing?!?
thats what i've been told as well when i asked the same question - you'd need the diff housing from a 3.23 & above...
_________________ R.I.P. Scotty |
|||
| Top | |
|||
| ReGiE |
|
|||
|
ahh well i can always find out
 but i might just swap the diffs over. that sounds easier
_________________ Gooooone - Eb2 Coon - 143RWKW |
|||
| Top | |
|||
| Nicko |
|
|||
|
the gear set is a different size and will not fit into 3.08 housing - unless you have a a*** made for a 3.08 housing (there are two series a 78 and a 75/76 series - one of them will fit into a 3.08 the other wont)
Must Be 3.23 or above to fit one out of a wrecked xr. The lsd hemi will interchange from 3.08 to 3.45
_________________ Nicko |
|||
| Top | |
|||
| ReGiE |
|
|||
|
u seem to b e the man with all the answers tonight
yeah cheers for that loooks like the whole diff is going in
_________________ Gooooone - Eb2 Coon - 143RWKW |
|||
| Top | |
|||
| Smackdown |
|
|||
|
Would it be cheaper to modify the gears (get someone to do it) or to get the whole diff?
I'm not sure whether to get 3.45 or 3.7s anyway.
_________________ BA Falcon Futura on EGas. Stock as...
|
|||
| Top | |
|||
| ReGiE |
|
|||
|
you could prolly get a 3.45 diff for around 500 or so im guessing
_________________ Gooooone - Eb2 Coon - 143RWKW |
|||
| Top | |
|||
| azza |
|
|||
|
Smackdown wrote: Would it be cheaper to modify the gears (get someone to do it) or to get the whole diff?
I'm not sure whether to get 3.45 or 3.7s anyway. Go a 3.7 mate... i changed to a 3.45 from a 3.08 and i cant notice much difference in take off. all i notice is it revs alot harder..... but it did hurt fuel economy a bit so id assume 3.7 would hurt even more..
_________________ BA XR8 manual ute black |
|||
| Top | |
|||
| Greenmachine |
|
||
|
??? - I had 3.45 centre put into my 3.08 housing - that's a non LSD centre tho - BUT the transmission place that did it said a LSD 3.45 centre would have been no problem.
In fact I had a LSD centre lined up but the sleazy a***hole in Melbourne I was buying the parts off ripped me off - ie. parts didn't arrive - number not connected anymore etc. (seems real strange for about $320 worth - evidently he was frying bigger fish at the same time). So because I was impatient I just grabbed normal 3.45 centre bits and had them fitted.
_________________ Sold the Greenmachine - now driving 2015 Jeep Cherokee Trailhawk. |
||
| Top | |
||
| xr8 dismantler |
|
|||
|
Greenmachine wrote: ??? - I had 3.45 centre put into my 3.08 housing - that's a non LSD centre tho.
depends on what the 3.45 came out of aswell. these things have been changed and swapped so much now. if you buy a new a*** you can buy 3.45 to fit all the different series of diffs |
|||
| Top | |
|||
| Smackdown |
|
|||
|
Looks like I'm gonna have to call a diff place in Perth because I'm hearing 2 1/2 completely different sides.
1: Can't be done. 2: Can be done with or without some modifying. 1/2: Can be done but its not an LSD. When I know I'll find out.
_________________ BA Falcon Futura on EGas. Stock as...
|
|||
| Top | |
|||
| Smackdown |
|
|||
|
xr8 dismantler wrote: Greenmachine wrote: ??? - I had 3.45 centre put into my 3.08 housing - that's a non LSD centre tho. depends on what the 3.45 came out of aswell. these things have been changed and swapped so much now. if you buy a new a*** you can buy 3.45 to fit all the different series of diffs Cheers mate....I think that helps a bit more.
_________________ BA Falcon Futura on EGas. Stock as...
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 96 guests |
