|
| Mad2 |
|
|||
|
{USERNAME} wrote: what's the problem with asking questions none!  take the car down the quarter & see what it can do 1st .... then try a different ratio .... say some where in between what ya got & 4.11 |
|||
| Top | |
|||
| shipo_1150 |
|
||
|
I think its the questions and not thinking first mate. 4.11 is very low low for a 6speed. I wouldnt even put them into my ef on the street.
|
||
| Top | |
||
| ebxr82nv |
|
||
|
{USERNAME} wrote: ok so something like 3.45 would be more acceptable for a road car. what i want to find out what diff ratio to use to get in the 13's and a every day drive with around 200 rw kw. i am currently driving my fathers 2004 ba xt 4 speed but am thinking of a bf xr6 with the 6 speed for my p's. So do you currently have this car? Or just asking for the future?
_________________ 9/98 AU1 XR6hp-about to retire from the road and be reborn on the race track. |
||
| Top | |
||
| SWC |
|
||
|
{USERNAME} wrote: what's the problem with asking questions No problem asking questions. Just that we get the same s**t every school holidays. I take it you are still at school. Do you realise what it will cost you to get an NA BF XR6 tp 200RwKw and into the 13 sec bracket? |
||
| Top | |
||
| shipo_1150 |
|
||
|
Here is a thread on here of someones ba/f thats around 220rwkw. Cant remembers his name but its worth a read if your looking/wanting to do it
|
||
| Top | |
||
| nonricer |
|
||
Age: 27 Posts: 26 Joined: 25th Jun 2013 Ride: 2004 ford falcon xt ba mk2 Location: North Western Sydney |
currently driving a ba xt but want a bf xr6 for my p's
i know it sounds stupid but i want to be able to beat my friends silvia non turbo and integra type r, skylines etc. |
||
| Top | |
||
| Mad2 |
|
|||
|
|
|||
| Top | |
|||
| 95Fairmontghiav85.0L |
|
||
|
i had it in my 4 speed xr6... ran fine but yeah 6 speed i dont know
|
||
| Top | |
||
| efxr6wagon |
|
||
|
I pretty sure that 4.11 gears were originally for cars running 30-inch or taller slicks, a long first gear, and wanting to hit the end of the quarter-mile doing almost redline in top gear. Probably not very practical for a street car on 25-26 inch tyres running a 4.17 first gear (that's 17.1 turns of the crank for one turn of the axle). Even the 2.39 first gear of the BTR 4-speed can get a good launch with only 3.9 gears (9.3 crank to axle ratio). Anything more than 3.45 with the ZF, and the car will probably be ahead of the engine, waiting for the revs to catch up
_________________ 95 EF XR6 wagon, 17" FTRs, DBA rotors, KYB/Koni, AU bottom end, ported EF head, backcut valves, SS Inductions, Territory intake, 10.2 CR, Auckland 1258 cam, vernier gear, PH4480 headers, no cat, Tickford 2.5", 2800rpm stall, J3 chip |
||
| Top | |
||
| cjh |
|
|||
|
{USERNAME} wrote: I pretty sure that 4.11 gears were originally for cars running 30-inch or taller slicks, a long first gear, and wanting to hit the end of the quarter-mile doing almost redline in top gear. Probably not very practical for a street car on 25-26 inch tyres running a 4.17 first gear (that's 17.1 turns of the crank for one turn of the axle). Even the 2.39 first gear of the BTR 4-speed can get a good launch with only 3.9 gears (9.3 crank to axle ratio). Anything more than 3.45 with the ZF, and the car will probably be ahead of the engine, waiting for the revs to catch up Nicely put bloke, nicely put....... 
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 26 guests |
