|
| savage78 |
|
|||
|
want to put a 4 speed trans into early 88 ea cause mine is dying slowly what has to be done
|
|||
| Top | |
|||
| needfordspeed |
|
||
|
Done this on my 88 EA, from memory we needed to make a custom cross member as the factory ones don't work out due to the studs being in a different position than the EA2. You'll either need to change you're whole wiring loom to a EA2 style one which already suits the BTR, or you can tap into your current wiring with the help of some wiring diagrams.
It's not as straight forward as you'd think!
_________________ 1988 EA S-Pack|MPI|LSD|AIT turbo manifold|Garrett GT3540|3" Exhaust turbo back|Resprayed|microtech LT8s|60lb Injectors|Bosch 044 with surge tank|3000 RPM stall|Ported AU head|Wade turbo cam|Crow double valve springs|1.3mm MLS headgasket|C4 conversion|Built bottom end|10.6@125MPHi |
||
| Top | |
||
| savage78 |
|
|||
|
i know It's not as straight forward as you'd think thats why im asking i can do the tap into your current wiring with the help of some wiring diagrams.If anyone has them please send them to me thanks it that i have two four speed sitting here going to waste
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 51 guests |
