|
| bry40l |
|
|||
|
pulled the pump down.. again and fiddled with the vanes and they still seem to be no different on either side, so i put them back in, but that plate thats held in with th ebig circlip had fallen out which id say was the colpret, i had checked it and checked it..and checked it before putting the pump back together yesterday but it decided to fall out today, so now i have realised why it fell out and made sure the clip was fully inserted and secure and now i have the worlds best power steering pump!!
 thanks for every ones input over the past week
_________________ BF XR6 |
|||
| Top | |
|||
| fordnut1988 |
|
||
|
hi guys i have a power steering pump that moans and groans and whines like a b**ch and also leaks will this kit fix all that?
|
||
| Top | |
||
| bry40l |
|
|||
|
throw it an buy a new one, once they make that sound the rubber seal kit wont stop the noise.they usually make that noise if theyve been run very low/out of fluid
_________________ BF XR6 |
|||
| Top | |
|||
| fordnut1988 |
|
||
|
bry40l wrote: throw it an buy a new one, once they make that sound the rubber seal kit wont stop the noise.they usually make that noise if theyve been run very low/out of fluid yeah i let it run out of fluid about 4 times lol my bad 
|
||
| Top | |
||
| bry40l |
|
|||
|
yeah if you rebuild it with the rubber kit it will still whine,
_________________ BF XR6 |
|||
| Top | |
|||
| fordnut1988 |
|
||
|
bry40l wrote: yeah if you rebuild it with the rubber kit it will still whine, yeah thats what i was afraid of looks like i need to go to the wreckers |
||
| Top | |
||
| bry40l |
|
|||
|
go onto ebay and look at au 6 cyl ones, ash told me they sell for a couple bucks plus postage and are the same unit
_________________ BF XR6 |
|||
| Top | |
|||
| fordnut1988 |
|
||
|
just had a quick look look about the same price as a new ef one but i cant afford that atm might go to pick a part
|
||
| Top | |
||
| bry40l |
|
|||
|
fordnut1988 wrote: just had a quick look look about the same price as a new ef one but i cant afford that atm might go to pick a part make sure the one you pick has fluid in it, and no leaks of course, check the back and the front where the shaft goes in for leaks, get an au one as it wouldnt be as old it will probably be a better one
_________________ BF XR6 |
|||
| Top | |
|||
| fordnut1988 |
|
||
|
bry40l wrote: fordnut1988 wrote: just had a quick look look about the same price as a new ef one but i cant afford that atm might go to pick a part make sure the one you pick has fluid in it, and no leaks of course, check the back and the front where the shaft goes in for leaks, get an au one as it wouldnt be as old it will probably be a better one will the au fit my serpentime setup? |
||
| Top | |
||
| bry40l |
|
|||
|
fordnut1988 wrote: bry40l wrote: fordnut1988 wrote: just had a quick look look about the same price as a new ef one but i cant afford that atm might go to pick a part make sure the one you pick has fluid in it, and no leaks of course, check the back and the front where the shaft goes in for leaks, get an au one as it wouldnt be as old it will probably be a better one will the au fit my serpentime setup? i dont see why not, would be the same unit
_________________ BF XR6 |
|||
| Top | |
|||
| fordnut1988 |
|
||
|
ah kk can anyone confirm this?
|
||
| Top | |
||
| fordnut1988 |
|
||
|
Ash wrote: yep ahhh kk is the ba the same as well cause the auction says au-ba |
||
| Top | |
||
| bry40l |
|
|||
|
fordnut1988 wrote: Ash wrote: yep ahhh kk is the ba the same as well cause the auction says au-ba straight away looking at the ba it has a plastic tank, havent actually seen the pump itself though but if ash says its different it would be
_________________ BF XR6 |
|||
| Top | |
|||
| fordnut1988 |
|
||
|
ahhh kk so eb2 to au are the same? eb-ed just need to change pulley yeah?
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 56 guests |
