|
| Olive Xm |
|
|||
|
I am looking at getting a Disk Brake 9 Inch for the XG but all the diffs I have looked at the brake disk sits behind the axial, so if I wanted to change the disk I would have to remove the axle.
Are they all like this?? I know the Borg Warners used to be like this then changed to the Disk on the outside about XD. |
|||
| Top | |
|||
| cjh |
|
|||
|
Olive Xm wrote: I am looking at getting a Disk Brake 9 Inch for the XG but all the diffs I have looked at the brake disk sits behind the axial, so if I wanted to change the disk I would have to remove the axle. Are they all like this?? I know the Borg Warners used to be like this then changed to the Disk on the outside about XD. Yep....XC was the last to get 9" diffs......2.75 or 3.00:1......usually dual exhausts got the 3.00's.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| Olive Xm |
|
|||
|
I thought that XE had 9's in the ESP & 351's.
|
|||
| Top | |
|||
| cjh |
|
|||
|
XE ESP 351's had disc brake BW's...usually 28 spline 4 pinion LSD.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| Olive Xm |
|
|||
|
Ok so I guess that you can only get 9's with the Disc behind the axle then.
Last edited by Olive Xm on Tue Mar 09, 2010 10:11 am, edited 1 time in total. |
|||
| Top | |
|||
| LTDHO |
|
|||
|
Being a ute or panel van any post XA 9" will fit. I fitted a XBGT 9" to my XE wagon. (which I'm selling)
|
|||
| Top | |
|||
| MoffatGhia |
|
||
|
one option is to use the caliper mount brackets and calipers from an XF, IIRC very little involved to bolt them up, but you wont be able to hook the handbrakes up without a lot of stuffing around
why do you want a 9" anyway? |
||
| Top | |
||
| Olive Xm |
|
|||
|
400 HP clevo and Toploader
|
|||
| Top | |
|||
| MoffatGhia |
|
||
|
theres been more than a few tougher combo's that have lived quite happily with a borg warner.....
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 79 guests |
