|
| hawkman |
|
||
|
Hi guys and dolls
Anyone got any experience with Whiteline adjustable sway bars for an AU (or any other cra for that matter??) Thanks in advance |
||
| Top | |
||
| twr7cx |
|
|||
|
me and my brother have non-adjustable whitelines and there great.
how do the adjustable ones get adjusted? |
|||
| Top | |
|||
| rushed |
|
|||
|
i had non-adjusts, made a great improvment.
adjustable youdd be able to tune in more or less over/understeer |
|||
| Top | |
|||
| sam12h |
|
|||
|
Best, chassis tuning tool, ever (said in best comic book guy voice).
Basics of how to adjust: http://www.whiteline.com.au/docs/instru ... eneral.pdf AU specific artilce http://www.whiteline.com.au/articles/PF ... 5_AU_1.htm I know its for E series, but still a good read (the above article is pretty crap for something found on a suspension sellers site): http://www.whiteline.com.au/articles/TF ... alcona.htm
_________________ Production Editor of Performance Motoring at Express Media Group |
|||
| Top | |
|||
| ELGT |
|
|||
|
I have them on an EL, good product, shorten links for stiffer, go to end for softer.
Have 5 adjustments on bar, and 3 on link mount from memory. If you decide to use them, start at softest setting, which is heavier than anything factory, and work from there. |
|||
| Top | |
|||
| hawkman |
|
||
|
Thanks for the info guys. I will definitely get them. I had some custom made for my 535 BMW by K-MAC and they were terrific. The ability to dial in or out varying degrees of oversteer or understeer depending on conditions is terrific for a circuit junkie like me. The Beemer also had camber adjustments both ends, Eibach springs, Bilsteins shocks and a strut tower brace. I'm thinking of leaving the springs stock inthe XR8 and using Koni sport adjustable shocks. Any comments?? Is there a front chassis brace available for the AU??
|
||
| Top | |
||
| cjh |
|
|||
|
I currently have Whiteline adj on the front. It works very well, but I made my own links from the lower control arm to the sway bar, as the ones supplied moved too much and hit the shockies. I also have a non-adj one on the rear, and again had to make mountings for it too. You also have to strengthen the brackets mounts on the chassis rails for the rear sway bar link mountings. They will break without strengthening, especially with a 27mm bar on it.
Hope this helps.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 32 guests |
