|
| Disco Frank |
|
|||
|
ok guys have a mate goign to the drags on wed nite and needs some 16" rims
question is do AU falcon rims fit onto a skyline (r33 ) ie the stud patter obviously the ofset will be differnt but should be fine for the rear wheels
_________________ RIP SCOTT |
|||
| Top | |
|||
| twr7cx |
|
|||
|
ring up a tyre joint and ask them what the PCD is for the Skyline, if it is 5 x 114.2 then they will fit.
Or do a google search for 'Nissan Skyline PCD' and one of the pages in the results is http://www.wheelspecs.com/specs/wheelmodels/3013, which quotes PCD as 5 x 114.3, which is close enough considering thestud holes in the ford wheel are around 17mm's and the stud size is only 12/13mm... How's that answer for you Frank, considering it's from the bloke that your so technically superiour too...? |
|||
| Top | |
|||
| CHEF |
|
|||
|
Yep they bolt on but offset can vary... GTR offset is very similar to old Eseries but GT-S is less offset, so similar to AU...
I tryed a mates set of 19x10s off his 32 gtr on the back of mine and far out did my shopping trolley look insane... dish city! |
|||
| Top | |
|||
| Disco Frank |
|
|||
|
{USERNAME} wrote: ring up a tyre joint and ask them what the PCD is for the Skyline, if it is 5 x 114.2 then they will fit.
Or do a google search for 'Nissan Skyline PCD' and one of the pages in the results is http://www.wheelspecs.com/specs/wheelmodels/3013, which quotes PCD as 5 x 114.3, which is close enough considering thestud holes in the ford wheel are around 17mm's and the stud size is only 12/13mm... How's that answer for you Frank, considering it's from the bloke that your so technically superiour too...? i never said such a thing! 
cheers dude
_________________ RIP SCOTT |
|||
| Top | |
|||
| dvyvan |
|
||
|
ive had a mate put EL rims on the rear of a skyline, they just ripped off the rear callipers. Just a burnout car anyways
_________________ Automatics only come in assult riffles
|
||
| Top | |
||
| Andrew J |
|
|||
|
{USERNAME} wrote: ring up a tyre joint and ask them what the PCD is for the Skyline, if it is 5 x 114.2 then they will fit.
Or do a google search for 'Nissan Skyline PCD' and one of the pages in the results is http://www.wheelspecs.com/specs/wheelmodels/3013, which quotes PCD as 5 x 114.3, which is close enough considering thestud holes in the ford wheel are around 17mm's and the stud size is only 12/13mm... How's that answer for you Frank, considering it's from the bloke that your so technically superiour too...? Falcon pcd is actually 5 * 114.3 exactly the same as the skyline. It originates from 5 * 4 and a half inches. 4.5 * 25.4mm = 114.3mm
_________________ The problem with America is stupidity. I'm not saying there should be a capital punishment for stupidity, but why don't we just take the safety labels off of everything and let the problem solve itself?
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 20 guests |
