Hi guys im new to the website and just need a little help with somethings.

Right, so im contemplating doing a conversion on my AU XR6 series 1 i know most of what i have to do just not to sure about the wiring.

Cheers

If you see TI Performance for a J3 chip you won't need to do anything with the wiring, just install the chip & pick up some timing advance (if running high octane fuel) You will need to hook up the reverse switch though so your lights work.

There is alot of conflicting posts on resistor values for the AU manual conversion. I contribute this to wiring differences between models. Pretty sure Voxaces auto to manual conversion post covers the au.

Cheers mate, where about's is Voxaces post?

here: {DESCRIPTION} have a fish through that. Not sure if voxace himself covers it but I believe there is some info in there regarding the au.

Thanks mate that will help a lot!