|
Aaronauxr6 |
|
|||
|
Recently bought a Au xr6, thought it was all good until I've realised that the gear stick rattles in 4th gear and grinds out of it after I release the clutch. Was wondering if anyone has experienced it, to tell me what it is or what not so I don't have to get it pulled out just for them to tell me its stuffed. Cheers
|
|||
Top | |
Shortshift |
|
|||
|
'Grinding' sounds like the 3/4 syncro has worn out. If the gearstick is vibrating, the mainshaft bearings could need replacing.
![]() You'll have to remove the box to check & repair it anyway. Before you do that, try changing the transmission fluid and put in some friction modifier (Castrol Transmax Z or similar).
_________________ AU2 XR8 with Raptor VL, ported Yella Terra GT40P heads, Scorpion 1.6 RRs, XE264HR-14 Comp Cam, ceramic coated Hurricane Headers, 60lb injectors, Walbro 255, 200cfi cats, 3" exhaust & Snow Performance water methanol injection |
|||
Top | |
Aaronauxr6 |
|
|||
|
I forgot to mention that it has a short shifter in it as well, It doesn't always happen on gear changes going in to 4th but its happened just enough for me to be concerned, straight away I thought it could be a syncro but I saw that it could be because of the short shifter if that is a reason.
Nah it only occurs in 4th Cheers I'll have a look at the fluid you mentioned |
|||
Top | |
Shortshift |
|
|||
|
Another possibility is that the short shifter needs the stop adjusted. I had the same problem with mine after swapping it from one gearbox to another.
_________________ AU2 XR8 with Raptor VL, ported Yella Terra GT40P heads, Scorpion 1.6 RRs, XE264HR-14 Comp Cam, ceramic coated Hurricane Headers, 60lb injectors, Walbro 255, 200cfi cats, 3" exhaust & Snow Performance water methanol injection |
|||
Top | |
Aaronauxr6 |
|
|||
|
Am travelling a long distance tomorrow and I put the fluid in so will get back on it.
Cheers for the advice ![]() |
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 65 guests |