|
| Fakertaker |
|
|||
|
I installed some king superlows in my AUI XR6 last week. I have ultima lowered gas shocks in the rear and monroe GTs in the front.
I know that the springs take a small amount of time to settle, but it really isn't very low at all???!!? The back is OK but the front is only just lower than standard. I thought it might just look like that with the standard wheels, but I got some 18s yesterday and it still looks high. The rear shocks have a reduced length of about 30 mm specially made for king springs, and the front are pretty long. The way i see it, the shocks cannot possibly change the ride height, so why is it so high especially the front? Does anyone have any pics of superlows in AU1? I parked next to a mate's AUII S pack yesterday and it was pretty much the same ride height as his, his almost looks lower due to the C2R kit fitted. Any opinions or help would be great 
Cheers guys and gals, Matt
_________________ Oversteer - The only way to steer |
|||
| Top | |
|||
| AU-MUSTD |
|
|||
|
Check my gallery, it's an au1 with superlows and i'm happy with the height
_________________ Now with a hint of "BLING" |
|||
| Top | |
|||
| Disco Frank |
|
|||
|
mmm au with superlows hey....
got me a XR6 like that here... 
_________________ RIP SCOTT |
|||
| Top | |
|||
| fairmont1998 |
|
|||
|
Check the part number on the spring and compare it with the catalogue on King Spring's web site to make sure they are the correct springs.
They may have possibly sold you V8 fronts.
_________________ 2008 WQ Fiesta XR4 |
|||
| Top | |
|||
| Fakertaker |
|
|||
|
fairmont1998 wrote: Check the part number on the spring and compare it with the catalogue on King Spring's web site to make sure they are the correct springs.
They may have possibly sold you V8 fronts. Yeah they are the same. I'm sure this explains a little bit of extra height...
_________________ Oversteer - The only way to steer |
|||
| Top | |
|||
| Fakertaker |
|
|||
|
Disco Frank wrote: mmm au with superlows hey....
got me a XR6 like that here... Hmmmm your rear looks the same as mine, but I still have a gap above my front wheels between wheel and guard... maybe they will sink a little more. Are you using standard shocks or new ones? cheers mate
_________________ Oversteer - The only way to steer |
|||
| Top | |
|||
| Sickn |
|
||
|
I HAVE SUPERLOWS IN MY AU AS WELL I HAPPY WITH IT, I GOT TE50 KITT SO IT SITS NICE AND LOW TO THE ROAD, BUT WOULD LIKE FRONT DOWN A LITTLE MORE TO LEVEL WITH THE BACK, FULL BOOT INSTALL DROPED THE BACK END A LITTLE
_________________
|
||
| Top | |
||
| Disco Frank |
|
|||
|
Fakertaker wrote: Disco Frank wrote: mmm au with superlows hey.... got me a XR6 like that here... Hmmmm your rear looks the same as mine, but I still have a gap above my front wheels between wheel and guard... maybe they will sink a little more. Are you using standard shocks or new ones? cheers mate brand new KYBS on all 4 
_________________ RIP SCOTT |
|||
| Top | |
|||
| Tyretoaster |
|
||||
|
These are 60mm, but not kings, I only fit kings to customer cars.
|
||||
| Top | |
||||
| Tyretoaster |
|
||||
|
..
|
||||
| Top | |
||||
| lc0083 |
|
||
|
I had the same problem when i lowered my au fairmont but the front came down more than my rear
|
||
| Top | |
||
| v8fordman351 |
|
|||||
|
ive got kings superlows monroe shocks and 18" wheels and it sits like this
|
|||||
| Top | |
|||||
| v8fordman351 |
|
|||
|
mine seems opposite when full off fuel allways looks a** heavy but with fuel prices the way they are its not such a problem anymore lol
|
|||
| Top | |
|||
| Ken_B |
|
|||
|
have any of yous had proplems with fronts guards cutting up front tyres???
i have
_________________ AUII XR6 VCT |
|||
| Top | |
|||
| Ken_B |
|
|||
|
it was ok until i got new tyres. they are a bit more Square than the last ones. keeps bending the lip on the front guards out.
Gotta get panel beater to roll em.
_________________ AUII XR6 VCT |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 140 guests |
