Fordmods Logo

Auto gear box & Steering rack advice?????? 

 

Page 1 of 2 [ 18 posts ] Go to page 1, 2  Next

 
 Post subject: Auto gear box & Steering rack advice??????
Posted: Thu Jun 09, 2005 10:09 pm 
Stock as a Rock
Offline

Posts: 148

Joined: 14th May 2005

Location: New South Wales
NSW, Australia

Can anyone tell me how much it cost to get an 4 speed auto gear box out of an XH (EF/EL) reconditioned, and how long it would take? I guessing that most places would probably do exchange deals?

While you have your thinking caps on I need the same advice for a steering rack?

Any info would be appreciated.
Top
 Profile  
 
 
Posted: Sun Jun 12, 2005 9:02 am 
Getting Side Ways
Offline

Posts: 625

Joined: 6th Nov 2004

Ride: R32 GTR

Location: Brackistan
VIC, Australia

It depends on how busy the workshop is.

However, with one person working on only your box, it can be done in a day depending on how busy the shop is or how streamlined they operate, could take longer. I worked for a few days doing a mini computer network install in an auto box reconditioning shop and saw it done.

Lets say I've never seen that many custom tools for any other automotive trade!

Cost. I'd imagine its the same box as the EB2>EL box. Could be wrong though. Imagine $1700-$2500 depending on internal damage and how good they do the job and whether or not they're ripoff or good value.

Steering rack? NFI.
Top
 Profile  
 
 
Posted: Sun Jun 12, 2005 12:12 pm 
Getting Side Ways
Offline
User avatar

Age: 39

Posts: 2975

Joined: 5th Nov 2004

Ride: BF Typhoon

Location: Melbourne
VIC, Australia

Whats wrong with the rack, how u know is f'ed?

 

_________________

BF Typhoon, Dejavu - 6sp Auto, Leather, Sunroof, 19"s, Electric Pedals, Tint, FPV Sports Wheel, FPV Mats.

Top
 Profile  
 
 
Posted: Sun Jun 12, 2005 4:20 pm 
Stock as a Rock
Offline

Posts: 148

Joined: 14th May 2005

Location: New South Wales
NSW, Australia

{USERNAME} wrote:
Whats wrong with the rack, how u know is f'ed?


I've had a good look at the tie rod ends etc and the coupling is the steering shaft and all appears to be OK.

When I move the wheel slightly from side to side, just applying some load I hear a 'knocking' noise coming from the steering.

Given I have inspected the other areas I am suggesting, as are two steering machanics, that the rack needs to be replaced.

I may well be wrong, but if you have any other ideas I'm open to suggestions.
Top
 Profile  
 
 
Posted: Sun Jun 12, 2005 4:22 pm 
Stock as a Rock
Offline

Posts: 148

Joined: 14th May 2005

Location: New South Wales
NSW, Australia

{USERNAME} wrote:
It depends on how busy the workshop is.
Imagine $1700-$2500 depending on internal damage and how good they do the job and whether or not they're ripoff or good value.


That seems to be rather expensive, not that I'm doubting you, just wasn't expecting it to be that kind of money.
Top
 Profile  
 
 
Posted: Sun Jun 12, 2005 11:21 pm 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 2282

Joined: 14th Jan 2005

Gallery: 8 images

Ride: ED Fairmont Ghia & EF XR8

Location: Melbourne
VIC, Australia

we had an ed gli come in with a rooted auto. to get it fully recod it was approx $2000 trade price

 

_________________

Image

Top
 Profile  
 
 
Posted: Mon Jun 13, 2005 12:19 am 
Getting Side Ways
Offline
User avatar

Age: 39

Posts: 2832

Joined: 7th Nov 2004

Gallery: 4 images

Ride: Lincoln LS, MKII Escort, ED

Location: geelong
VIC, Australia

well, for the rack you could be looking at $390 + (installed + alignment) and i dont think tie rod ends are in that price (my cars going in tuesday for a new rack).

gearbox 2000-2500 is my guess

 

_________________

Because i can.

Top
 Profile  
 
 
Posted: Mon Jun 13, 2005 1:04 am 
Getting Side Ways
Offline
User avatar

Age: 42

Posts: 1001

Joined: 5th Nov 2004

Gallery: 19 images

Ride: EL Fairmont Ghia

Power: 132 rwkw

Location: Brisbane
QLD, Australia

hey cds70 I bought a reconditioned steering pump for 150 and a reco rack for 250 - fitted myself - but my steering was leaking pretty badly and i had to use so much force to steer i collapsed the bearing in the firewall.
The noise might be a common thing with falcons... just go to a few car dealers with falcons from ea to au, they pretty much all do the slight click from side to side (when the engine is off) but if it is worse than what other cars are doing it might need some attention needed paying to it.. if it aint broke...
good luck with the gearbox by the way

 

_________________

175.7hp 15.5 @ 374,000km
Team I have two E-Series AND all my teeth.

Top
 Profile  
 
 
Posted: Tue Jun 14, 2005 4:30 pm 
Smokin em up
Offline
User avatar

Age: 38

Posts: 254

Joined: 14th Mar 2005

Gallery: 3 images

Ride: EF II XR6

Location: Tamworth
NSW, Australia

{USERNAME} wrote:
well, for the rack you could be looking at $390 + (installed + alignment) and i dont think tie rod ends are in that price (my cars going in tuesday for a new rack).


Where's this? mechanics here in canberra reckon itll be about $500 to do mine

 

_________________

Who needs an XR6 when you've got a corolla wagon :sad:

Top
 Profile  
 
 
Posted: Tue Jun 14, 2005 4:35 pm 
Getting Side Ways
Offline
User avatar

Age: 39

Posts: 2975

Joined: 5th Nov 2004

Ride: BF Typhoon

Location: Melbourne
VIC, Australia

Reason I aaked how you knew is i got a weird noise which comes n goes, not clicking or knocking, more a groaning noise - was told it might be something to do with steering/rack/pump/etc. yet got no idea where to take it in SE melb to have it looked at.

 

_________________

BF Typhoon, Dejavu - 6sp Auto, Leather, Sunroof, 19"s, Electric Pedals, Tint, FPV Sports Wheel, FPV Mats.

Top
 Profile  
 
 
Posted: Tue Jun 14, 2005 10:05 pm 
Getting Side Ways
Offline
User avatar

Age: 39

Posts: 2832

Joined: 7th Nov 2004

Gallery: 4 images

Ride: Lincoln LS, MKII Escort, ED

Location: geelong
VIC, Australia

{USERNAME} wrote:
{USERNAME} wrote:
well, for the rack you could be looking at $390 + (installed + alignment) and i dont think tie rod ends are in that price (my cars going in tuesday for a new rack).


Where's this? mechanics here in canberra reckon itll be about $500 to do mine


got it done today, $380 from safety motors here in geelong.

There are about a dozen different clunk/click/groans falcons tend to make through the steering (good luck isolating the problems)

 

_________________

Because i can.

Top
 Profile  
 
 
Posted: Tue Jun 14, 2005 10:21 pm 
Getting Side Ways
Offline
User avatar

Age: 42

Posts: 492

Joined: 8th Nov 2004

Gallery: 2 images

Ride: EF Fairmont Wagon, ph34r!

Location: Northam
WA, Australia

{USERNAME} wrote:
Reason I aaked how you knew is i got a weird noise which comes n goes, not clicking or knocking, more a groaning noise - was told it might be something to do with steering/rack/pump/etc. yet got no idea where to take it in SE melb to have it looked at.


Is the sound similar to what happens when you try and move the steering when the wheels aren't moving or when you hold it at full lock (both times when the pump is under considerable load)? If it comes and goes it could be just as simple as an intermittant blockage requiring only a flush to fix. Worst case, you may be looking at a rooted pump.

 

_________________

Team Argon Silver

Top
 Profile  
 
 
Posted: Wed Jun 15, 2005 2:28 am 
Getting Side Ways
Offline
User avatar

Age: 50

Posts: 2705

Joined: 6th Nov 2004

Gallery: 11 images

Ride: 2009 FG XR6 Sedan

Location: Melbourne
VIC, Australia

with the clunk have you checked wheel bearings, upper and lower ball joints???
Top
 Profile  
 
 
Posted: Wed Jun 15, 2005 2:38 am 
Technical Contributor
Offline
User avatar

Age: 39

Posts: 3097

Joined: 5th Nov 2004

Gallery: 29 images

Ride: VU SS

Location: Ivanhoe
NSW, Australia

With the transmission, just get a second hand unit. I gave my old 4-speed auto away lol.

 

_________________

EF Fairmont now Sold!
Guides: {DESCRIPTION}|{DESCRIPTION} |{DESCRIPTION}

Top
 Profile  
 
 
Posted: Wed Jun 15, 2005 6:01 pm 
Stock as a Rock
Offline
User avatar

Age: 37

Posts: 198

Joined: 20th May 2005

Gallery: 5 images

Ride: Eb Fairmont II AND BA XT FALCON

Location: Melbourne
VIC, Australia

what's to say that the same thing wont happen to the second hand gearbox if it hasnt been rebuilt before though?....ive got 3 mates who own EB-ED and each of them has replaced their gearbox at about 200,000 k'z because the tranny dies on its a*** allowing it to shift into only 2 gears (similar to limp mode). And 2 of them have now got their second tranny rebuilt instead of finding another second hand one which is more than likely going to die again.
Mines had this problem for about 6 months now, cars been driven with 1st and 3rd for a while now im just waiting for the mechanic to come back from overseas who has a rebuilt tranny ready to be put in :?
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 2  [ 18 posts ]  Go to page 1, 2  Next

Who is online

Users browsing this forum: Mad2 and 41 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Mon Dec 23, 2024 9:14 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names