|
EF XR8 |
|
||
|
Hi am going to throw a manual in my efII xr8 "eecV" and have a few questions and yes have searched seems 99.9% is for 6cyl.
1. will any manual ed-au fit or ef/el only? 2. scince the 8 has seperate tcm unit what mods are needed to the comp if any? or how much and where from for a efII manual ecu? any help apreciated thanks
_________________ Quit complaining cause no one listens |
||
Top | |
One Drone |
|
|||
|
EF only. Not even an EL ECU will work as their thermos have only one plug, EF have two. A manual EF XR8 Manual ECU will cost you a fair bit unless you're lucky. The car will run fine with auto ecu, but thermos will be running full time. For more information on how to trick a V8 ECU, refer to the thread below:
http://fordmods.com/forums/5-0-ecu-opti ... 48222.html
_________________ There are 10 types of people in this world. |
|||
Top | |
bluecube |
|
|||
|
1. will any manual ed-au fit or ef/el only?
afaik you will need a v8 box. 6 cyl has different bellhousing and different input shaft.
_________________ Sold my EB
|
|||
Top | |
One Drone |
|
|||
|
lol I read wrong.. Had a few drinks when I read your post. I meant that ECU wise, only an EF Manual V8 ECU would work properly.
Box wise, EB to EL V8 boxes will all work, but better you find an EF-EL conversion. Otherwise you'll find you'll be buying lots of other little pieces. 6 cylinder boxes as bluecube said won't work.
_________________ There are 10 types of people in this world. |
|||
Top | |
EF XR8 |
|
||
|
thanks for that ppl gives mw a bit more off an idea will start trawlin the wreckers.
_________________ Quit complaining cause no one listens |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 40 guests |