|
| GASSED250 |
|
||
|
is it possible to sespline the axles in an EF diff?
Im planning a 302 into sigma conversion and want to use the EF lsd that i have sitting here |
||
| Top | |
||
| fairlane6970 |
|
|||
|
sure why not they cut down and respline 9inch diffs everyday of the week for just about anything that moves just talk to some diff places - it might not be cheap though
_________________
|
|||
| Top | |
|||
| GASSED250 |
|
||
|
some axles are tapered and narrower after the spline and cant be resplined
are e series axles like this? |
||
| Top | |
||
| cjh |
|
|||
|
GASSED250 wrote: some axles are tapered and narrower after the spline and cant be resplined are e series axles like this? Depending on how far you're going to shorten it....might not be a problem.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| GASSED250 |
|
||
|
cjh wrote: GASSED250 wrote: some axles are tapered and narrower after the spline and cant be resplined are e series axles like this? Depending on how far you're going to shorten it....might not be a problem. ok pull an axle today and found that they can be resplined if your cutting 100mm or more off the axle EF RH axle is 805mm i need it to be at 685 at the most |
||
| Top | |
||
| cjh |
|
|||
|
GASSED250 wrote: cjh wrote: GASSED250 wrote: some axles are tapered and narrower after the spline and cant be resplined are e series axles like this? Depending on how far you're going to shorten it....might not be a problem. ok pull an axle today and found that they can be resplined if your cutting 100mm or more off the axle EF RH axle is 805mm i need it to be at 685 at the most Let me know how you go, I'm looking at doing a similar thing.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 29 guests |
