ok the low down on B&M launch control
2 ways of install

INSTALL 1 (LAUNCH CONTROL)
if you install it the way it tells you in the box it will act like a launch control
(master cylinder to line in and rear brakes to line out out) so you just push the button
and put your foot on the brake and it will lock your brakes so the harder you push
the brakes the more it will lock them, then release the putton and you can launch,

INSTALL 2 (LINE LOCKER)
for line lockers (locking off the bake brakes)
just swap the brake lines around so (master cylider to line out and rear brakes to line in)
this will let you lock off your bake brakes so you have no brakes in the rear
(with foot off the brakes push the button and than your rear brakes will be locked of so (NO BRAKES) only front
SO BIG a** SMOKEYS and you can all so still use the launch control part of it too
(just put your foot on the brakes and push the button and take your foot off the brakes) thay will be locked on

you can get these from
www.ebay.com.au
http://www.vpw.com.au/productgroup.asp? ... GrpID=2929

hope this was some help to you guys

is this any help at all?

very much so, thanks mate, ill be investing soon!

sweet glad i helped some one

Dude that is sick as. HEaps of help for me as well. Just what I have been looking for but thought was non existant!

yay thats 2