|
| phatEB |
|
||
|
Doesn't flash tuning override most things?
I was talking to the guy in G1 S.A state drifting who runs a BA Barra turbo. He runs a BA mk1 ECU thats been flash tuned to over ride the sercurity, cooling and auto trans controls. I may be wrong though so correct me if Im wrong. |
||
| Top | |
||
| Dansedgli |
|
||
|
Thats right.
Same as mine minus the cooling. |
||
| Top | |
||
| eb_guy888 |
|
||
|
yep exactly right a flash tune takes the tune that is currently on ur car, in my case a ba mk1 AUTO xr6 turbo and would place that tune on the box leaving the car without a tune, it then replaces it with whatever is on it, such as a bf mk11 MANUAL xr6 turbo. The car thinks it is whatever the tune says it is
|
||
| Top | |
||
| frankieh |
|
|||
|
{USERNAME} wrote: yep exactly right a flash tune takes the tune that is currently on ur car, in my case a ba mk1 AUTO xr6 turbo and would place that tune on the box leaving the car without a tune, it then replaces it with whatever is on it, such as a bf mk11 MANUAL xr6 turbo. The car thinks it is whatever the tune says it is I know this is a very old post, but I figured I'd correct this. The BA ECU/PCM is a black oak PCM.. the BF is a Silver Oak. The BA has 1.4mb slow rom, and the BF 1mb fast rom.. long story short you cannot put a BF tune on a BA PCM. You can trick the IDS software into putting a BA manual tune on an auto PCM and you can do the same with BF auto and manual tune.. but you can't put BA on BF or vice versa. cheers Frank |
|||
| Top | |
|||
| 123esproc |
|
|||
|
Auto pcm can be tuned to suit manual in about 20 min
... my mate on fordmods has a laptop, software and plug in and successfully changed mine
_________________ |
|||
| Top | |
|||
| rickBAman |
|
||
|
Better off putting a manual ecu in because all the effort to find someone to flash it, properly, reprogram the whole damn thing, and then, try to fool your baby?!!! ECUs are pretty hard to just “reflash”, and who programmed the new software?? 500 bux will guarantee that your system is good…just replace the thing!!!
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 40 guests |
