|
| Smokey...Retired! |
|
|||
|
Hey all! Ive got a really bad vibration when im doing over 80kmh then back off the throttle completely....I dont know wat it is? Any ideas?
_________________ Blast from the past..... |
|||
| Top | |
|||
| GTBob |
|
|||
|
Possibly universal joints
_________________ Rotten Old Revhead!!! XW GTHO + EF ex cop car (exractors 2.5 cat back zorst !6" Simmons K&N +airbox mods Lowered with Bilstein shocks+Whiteline Bars NEXT THING Swap HO for GTP or Ferrari! |
|||
| Top | |
|||
| Electroboy |
|
|||
|
Check the drain hole in the tail shaft, make sure the tail shaft doesn't have any water in it.
_________________ Petrol prices are a b**ch!!! |
|||
| Top | |
|||
| GTBob |
|
|||
|
WTF is a drain hole doing in a tailshaft? is this some new modification
_________________ Rotten Old Revhead!!! XW GTHO + EF ex cop car (exractors 2.5 cat back zorst !6" Simmons K&N +airbox mods Lowered with Bilstein shocks+Whiteline Bars NEXT THING Swap HO for GTP or Ferrari! |
|||
| Top | |
|||
| bowsaw |
|
|||
|
GTBob wrote: WTF is a drain hole doing in a tailshaft? is this some new modification
Yeah, new one on me,  is it shaking the steering wheel, or your backside in the seat?
|
|||
| Top | |
|||
| Electroboy |
|
|||
|
bowsaw wrote: GTBob wrote: WTF is a drain hole doing in a tailshaft? is this some new modification Yeah, new one on me, is it shaking the steering wheel, or your backside in the seat?well you boys must be behind with the times AU's and BA's have drain hole, had the vib problem with my AU, and was told to check the drain hole at the diff end of the tale shaft and it did have some water in it which caused the problem.
_________________ Petrol prices are a b**ch!!! |
|||
| Top | |
|||
| One Drone |
|
|||
|
Turn off the vibrator.
_________________ There are 10 types of people in this world. |
|||
| Top | |
|||
| GTBob |
|
|||
|
Electroboy wrote: bowsaw wrote: GTBob wrote: WTF is a drain hole doing in a tailshaft? is this some new modification Yeah, new one on me, is it shaking the steering wheel, or your backside in the seat?well you boys must be behind with the times AU's and BA's have drain hole, had the vib problem with my AU, and was told to check the drain hole at the diff end of the tale shaft and it did have some water in it which caused the problem. It's not that WE are behind the times but the car is an E series NOT an AU or BA  
_________________ Rotten Old Revhead!!! XW GTHO + EF ex cop car (exractors 2.5 cat back zorst !6" Simmons K&N +airbox mods Lowered with Bilstein shocks+Whiteline Bars NEXT THING Swap HO for GTP or Ferrari! |
|||
| Top | |
|||
| joolz |
|
|||
|
Drain hole omg!!! steel shafts dont have them, alloy have them on the front weld yoke to release pressure when being welded. after shaft has been balanced the hole is plugged. even if the hole hasnt been plugged very little if any water will ener the shaft.
with the vibration problem if its worse on decaleration its certainly uni joints and more likely to be the rear. |
|||
| Top | |
|||
| Smokey...Retired! |
|
|||
|
umm to vibration isnt in the steering wheel. Seems to be along the drivetrain somewhere now thati thonk about it
_________________ Blast from the past..... |
|||
| Top | |
|||
| Electroboy |
|
|||
|
joolz wrote: Drain hole omg!!! steel shafts dont have them, alloy have them on the front weld yoke to release pressure when being welded. after shaft has been balanced the hole is plugged. even if the hole hasnt been plugged very little if any water will ener the shaft.
with the vibration problem if its worse on decaleration its certainly uni joints and more likely to be the rear. OMFG after shaft has been balanced the hole is plugged. Wrong!! even if the hole hasnt been plugged very little if any water will ener the shaft. Wrong!! i take it you have never driven through water before.
_________________ Petrol prices are a b**ch!!! |
|||
| Top | |
|||
| joolz |
|
|||
|
Electroboy i should know what im talking about as im a supervisor/quality officer at the factory that makes the driveshafts for ford.......
The vent hole stops the aluminuim weld frow blowing out as the shafts builds up pressure during welding. Yes i have driven in water but i dont use my car as a boat!! |
|||
| Top | |
|||
| mspw |
|
|||
|
joolz wrote: Electroboy i should know what im talking about as im a supervisor/quality officer at the factory that makes the driveshafts for ford.......
The vent hole stops the aluminuim weld frow blowing out as the shafts builds up pressure during welding. Yes i have driven in water but i dont use my car as a boat!! He he he. 
_________________
|
|||
| Top | |
|||
| Vic |
|
|||
|
Rear tyres unbalanced perhaps? Bearings?
_________________ 5.6L of carbon footprint. |
|||
| Top | |
|||
| Happy |
|
|||
|
hehe electro - been told recently?
_________________ Owning 1 of 67612 EF GLi Sedans made
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 90 guests |
