|
| vegabass |
|
||
|
The only thing about setting the brakes up the "right" way is the bleeder nipple is on the bottom side instead of the top. Has anyone had issues bleeding them with the nipple on the bottom?
_________________ Supercharger, extractors for sale |
||
| Top | |
||
| TROYMAN |
|
||
|
{USERNAME} wrote: The only thing about setting the brakes up the "right" way is the bleeder nipple is on the bottom side instead of the top. Has anyone had issues bleeding them with the nipple on the bottom? if the bleed nipple is on the bottom, it means the calipers are on the wrong side. if you swap them from left to right the bleed niple will be at the top.... |
||
| Top | |
||
| vegabass |
|
||
|
Troyman, that's the thing, the "wrong way" pic has the bleeder nipples at the top and the "right way" pic the nipples are at the bottom.
_________________ Supercharger, extractors for sale |
||
| Top | |
||
| TROYMAN |
|
||
|
{USERNAME} wrote: Troyman, that's the thing, the "wrong way" pic has the bleeder nipples at the top and the "right way" pic the nipples are at the bottom. eitherway righ,wrong.. you will never be able to bleed the calipers properly while mounted with the bleaders at the bottom, there will always be a pocket of air in the top of the caliper.. so if the supposed right way is with the bleeder at the botom the brakes will need to be bled with the caliper not mounted to the upright.. |
||
| Top | |
||
| vegabass |
|
||
|
Which makes a little sence and its simple seeing as its a floating caliper.
_________________ Supercharger, extractors for sale |
||
| Top | |
||
| TURBO_GHIA |
|
|||
|
does anyone know the part numbers for RBS rotors and calipers ?
_________________ HMMMM BOOST !!!
|
|||
| Top | |
|||
| rustyeb1991 |
|
||
|
if you want to go to the slip on rotors then the rbm part numbers are on page 1 of this thread.
|
||
| Top | |
||
| TURBO_GHIA |
|
|||
|
do race brakes sydney use the same rotor as race brake melb?
_________________ HMMMM BOOST !!!
|
|||
| Top | |
|||
| rustyeb1991 |
|
||
|
no rbs uses elgt 1 piece rotor/hub where rbm uses hub that takes a mustang 330mm slip on rotor which retains e-series offset.
don't have any part numbers for race brakes sydney. |
||
| Top | |
||
| 67RCE |
|
||
|
{USERNAME} wrote: no rbs uses elgt 1 piece rotor/hub where rbm uses hub that takes a mustang 330mm slip on rotor which retains e-series offset. don't have any part numbers for race brakes sydney. RBM - DBA069, RBS - DBA136
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
| Top | |
||
| vegabass |
|
||
|
67RCE
How do you bleed your brakes with the nipple on the bottom side?
_________________ Supercharger, extractors for sale |
||
| Top | |
||
| 67RCE |
|
||
|
{USERNAME} wrote: 67RCE How do you bleed your brakes with the nipple on the bottom side? My bleed nipple is at the top of the caliper.
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
| Top | |
||
| TURBO_GHIA |
|
|||
|
anyone got a part number for the c5 caliper , are they all the same caliper between the ford and holdens ,corvetts etc .... any idea if you get the rbs rotor in a 2 piece rotor
_________________ HMMMM BOOST !!!
|
|||
| Top | |
|||
| ef_falcon_95 |
|
|||
|
You can pick up a c5 corvette caliper from eBay us . Not cheap . Or get one of a bf . Difference between ford and Holden would be mounting bracket I'd say
_________________ El XR6 Turbo |
|||
| Top | |
|||
| vegabass |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: 67RCE How do you bleed your brakes with the nipple on the bottom side? My bleed nipple is at the top of the caliper. Can you post up some pics of which way your calipers are?
_________________ Supercharger, extractors for sale |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 46 guests |
