|
67RCE |
|
||
|
http://www.superpro.com.au/find-superpr ... Search+Now
SPF1325K SPF1326K SPF1327K These are the part numbers for the shims required to adjust camber and castor.
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
Top | |
hans hartman |
|
||
|
67RCE wrote: http://www.superpro.com.au/find-superpro-parts-for-my-vehicle?listMake=20&listModel=114&listSeries=151&button=Search+Now SPF1325K SPF1326K SPF1327K These are the part numbers for the shims required to adjust camber and castor. find a wheel alignment place that can do it,there seems to be 2 licences.1 can replace parts and will have the shims, the other adjusts the parts and tells you whats wrong-you have to fix it,most tyre places.
_________________ R.I.P HANS HARTMAN |
||
Top | |
phil545 |
|
|||
|
How much of the edge on the inside is wearing? If its only a few centimeters then i would be looking at your toe being wrong rather than camber possible due to worn bushes on the front and effectively your wheels have toed outwards
_________________ I hate arriving at my destination as then I have to get out of my car! |
|||
Top | |
killer_ef |
|
||
|
i will take a pic of it
|
||
Top | |
TROYMAN |
|
||
|
i would say running on superlows it would have a bit more camber than normal
we had to fit 1 sim in each side on our au and we went from std to xr6/ lows |
||
Top | |
67RCE |
|
||
|
TROYMAN wrote: i would say running on superlows it would have a bit more camber than normal we had to fit 1 sim in each side on our au and we went from std to xr6/ lows My AU, going from AU XR to Superlows did require the fitment of shims, but it was within the range allowed by the standard upper control arm mounts.
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
Top | |
killer_ef |
|
||
|
|
||
Top | |
killer_ef |
|
||
|
these are 4 month old tyres bty
|
||
Top | |
67RCE |
|
||
|
that looks like it has been Toe wear.
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
Top | |
phil545 |
|
|||
|
hmm i would def be hooking it up on wheel alignment machine to get the readings and pay particular attention to your toe, that looks like its wearing right on the edge, also are the maxxis z1?
_________________ I hate arriving at my destination as then I have to get out of my car! |
|||
Top | |
killer_ef |
|
||
|
nah there just some s**t tyre i bought for $65 each of ebay i had to go and pick them up at livo
i know it does need new tie rods and i have them but i dont have the time to get them done |
||
Top | |
phil545 |
|
|||
|
hmm ok, cant complain about that cost! but def be looking at the toe rather than the camber
_________________ I hate arriving at my destination as then I have to get out of my car! |
|||
Top | |
67RCE |
|
||
|
killer_ef wrote: nah there just some s**t tyre i bought for $65 each of ebay i had to go and pick them up at livo i know it does need new tie rods and i have them but i dont have the time to get them done That changes it! Go get the tie rod ends done, and a wheel alignment. FFS that's what is causing the wear!
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
Top | |
hans hartman |
|
||
|
67RCE wrote: killer_ef wrote: nah there just some s**t tyre i bought for $65 each of ebay i had to go and pick them up at livo i know it does need new tie rods and i have them but i dont have the time to get them done That changes it! Go get the tie rod ends done, and a wheel alignment. FFS that's what is causing the wear! wrong---------------------i know it does need new tie rods and i have them but i dont have the time to get them done thats the problem
_________________ R.I.P HANS HARTMAN |
||
Top | |
67RCE |
|
||
|
hans hartman wrote: 67RCE wrote: killer_ef wrote: nah there just some s**t tyre i bought for $65 each of ebay i had to go and pick them up at livo i know it does need new tie rods and i have them but i dont have the time to get them done That changes it! Go get the tie rod ends done, and a wheel alignment. FFS that's what is causing the wear! wrong---------------------i know it does need new tie rods and i have them but i dont have the time to get them done thats the problem Isn't that what I said?
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
Top | |
Who is online |
---|
Users browsing this forum: Google Adsense [Bot] and 64 guests |