Fordmods Logo

Changing Diff Center? URGENT 

 

Page 2 of 2 [ 26 posts ] Go to page Previous  1, 2

 
Posted: Sun Aug 28, 2005 7:32 pm 
Getting Side Ways
Offline
User avatar

Posts: 3115

Joined: 20th Dec 2004

Ride: Falcon

Location: Adelaide
SA, Australia

{USERNAME} wrote:
{USERNAME} wrote:
As for 3.08 to 3.45.. they look very similar..


I've heard/read all the misinformation too. but the part numbers on the housings are the SAME. So I don't see any reason why a 3.45 won't fit in a 3.08. I just went the complete rear end, cause I didn't want to hassel of changing centres. It was hard enough as is - I'm still sore.

BTW: I'm loving the new 3.45LSD - great fun.


Ive looked at the part numbers for 3 diffs.

3.45 LSD = 94dt-4005-AC
3.23 SS = 94da-4005-WB
3.08 SS = 94da-4005-CE

 

_________________

Stoke me a clipper, I'll be back for Christmas

Top
 Profile  
 
 
Posted: Sun Aug 28, 2005 7:52 pm 
ACT Cruise Moderator
Offline
User avatar

Age: 43

Posts: 6249

Joined: 24th Nov 2004

Ride: '06 BF GT-P

Power: 293 rwkw

Location: Canberra
ACT, Australia

yeah, the part number for the complete unit is different, but the housing part numbers, and mould markings are the same.

 

_________________

1998 DL LTD in Sparkling Burgundy, daily, 302W, stereo, slow
2006 BF GT-P in Ego, mods. Supercharged 5.8L all alloy modular

Top
 Profile  
 
 
Posted: Sun Aug 28, 2005 7:52 pm 
Technical Contributor
Offline

Age: 47

Posts: 1032

Joined: 6th Nov 2004

Ride: Shockwave BA XR6

Power: 152 rwkw

Location: Caroline Springs
VIC, Australia

in regards to your questions

3:08 diff requires you to machine shims and bearing cups to get any of the other ratios to fit
where as the 3:23 and above diffs will accept any ratio within reason without having to machine shims or anything

hope this helps
Top
 Profile  
 
 
Posted: Mon Aug 29, 2005 3:59 am 
Getting Side Ways
Offline
User avatar

Posts: 3115

Joined: 20th Dec 2004

Ride: Falcon

Location: Adelaide
SA, Australia

{USERNAME} wrote:
in regards to your questions

3:08 diff requires you to machine shims and bearing cups to get any of the other ratios to fit
where as the 3:23 and above diffs will accept any ratio within reason without having to machine shims or anything

hope this helps


thanks for that. Have you done this before?

Im guessing that means you need swap the whole centers over. What machining is needed - do you just need to open things up for larger bearings / wider hemi?

 

_________________

Stoke me a clipper, I'll be back for Christmas

Top
 Profile  
 
 
Posted: Mon Aug 29, 2005 10:27 pm 
Getting Side Ways
Offline
User avatar

Age: 61

Posts: 744

Joined: 11th Nov 2004

Gallery: 15 images

Ride: ED Falcon

Location: Adelaide
SA, Australia

The 3.45 wil not go into the 3.08, a 3.45 will go into a 3.23 and a 3.27 housing.
If you look at the main crown there is a number 0355 on the 3.08 gears.

If you look at the main crown the other one has a number 0358 on the 3.23 and 3.27 and 3.44.

These numbers relate to the housing size, they are not secret numbers from Lost hehehehe.

Hope this clears up some things.

 

_________________

I post here cos the russian tank driver doesn't

Top
 Profile  
 
 
Posted: Mon Aug 29, 2005 11:01 pm 
Getting Side Ways
Offline
User avatar

Posts: 3115

Joined: 20th Dec 2004

Ride: Falcon

Location: Adelaide
SA, Australia

{USERNAME} wrote:
The 3.45 wil not go into the 3.08, a 3.45 will go into a 3.23 and a 3.27 housing.
If you look at the main crown there is a number 0355 on the 3.08 gears.

If you look at the main crown the other one has a number 0358 on the 3.23 and 3.27 and 3.44.

These numbers relate to the housing size, they are not secret numbers from Lost hehehehe.

Hope this clears up some things.


hmm, not really

I have a 3.23 crownwheel in my hand now and there is no 0358 on it. There is 0578 stamped on (and other stuff as well), also 0578 cast into the hemi,and the same number stamped onto the pinion shaft.

This center is out of an EF.

 

_________________

Stoke me a clipper, I'll be back for Christmas

Top
 Profile  
 
 
Posted: Tue Aug 30, 2005 12:19 am 
Getting Side Ways
Offline
User avatar

Posts: 3115

Joined: 20th Dec 2004

Ride: Falcon

Location: Adelaide
SA, Australia

To add to this confusion, I looked at the housing for this 3.23 diff and it has 0578 on that as well. Im thinking that is good - the centers and the housing match up. Then I look at the housing on the 3.08 diff that is in my EF at the moment and it has the same 0578 in the same place.

Does this mean the 3.23 gears I have will fit in the 3.08 housing in the car atm? if so that would tend to suggest that 3.45 gears would also fit then.

 

_________________

Stoke me a clipper, I'll be back for Christmas

Top
 Profile  
 
 
Posted: Tue Aug 30, 2005 12:28 am 
ACT Cruise Moderator
Offline
User avatar

Age: 43

Posts: 6249

Joined: 24th Nov 2004

Ride: '06 BF GT-P

Power: 293 rwkw

Location: Canberra
ACT, Australia

As I said, from the outside, the housings (my original 3.08SS, and the 3.45LSD I just put in) have the same markings, and visually look identical, except the 3.08 isn't painted.

 

_________________

1998 DL LTD in Sparkling Burgundy, daily, 302W, stereo, slow
2006 BF GT-P in Ego, mods. Supercharged 5.8L all alloy modular

Top
 Profile  
 
 
Posted: Tue Aug 30, 2005 12:38 am 
Getting Side Ways
Offline
User avatar

Age: 61

Posts: 744

Joined: 11th Nov 2004

Gallery: 15 images

Ride: ED Falcon

Location: Adelaide
SA, Australia

okay I got the numbers wrong but you get the idea, but dont be fooled because all the diff housings have that number, its the numbers on the main crown gear that tell what the diff is 0575 is 3.08 and 0578 is 3.23 to 3.45,

 

_________________

I post here cos the russian tank driver doesn't

Top
 Profile  
 
 
Posted: Tue Aug 30, 2005 2:18 am 
Technical Contributor
Offline
User avatar

Posts: 2799

Joined: 6th Nov 2004

Gallery: 7 images

Ride: Falcon

Location: Sydney
NSW, Australia

Interesting to read all that... so it's a clearance issue? is the crown bigger in diameter? What are the actual limitations of the 3.08 housings?


Cheers

 

_________________

;++JustForDimSim++;

Cheap, fast and reliable.. choose 2.

Top
 Profile  
 
 
Posted: Tue Aug 30, 2005 7:56 pm 
Getting Side Ways
Offline
User avatar

Age: 61

Posts: 744

Joined: 11th Nov 2004

Gallery: 15 images

Ride: ED Falcon

Location: Adelaide
SA, Australia

The crown and pinion offset is different and visually it looks like the 3.45 main crown is larger

 

_________________

I post here cos the russian tank driver doesn't

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 2 of 2  [ 26 posts ]  Go to page Previous  1, 2

Who is online

Users browsing this forum: No registered users and 30 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Tue Dec 24, 2024 1:40 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names